PROVN OF SOLID WASTE MANAGEMENT PLANT AT JAIPUR MIL STN

Amount

Schedule `A' Part -I

Lump sum price worked out by contractor for Construction, fabrication and erection of PEB Structures of Shed A for Solid waste management plant complete all as shown on drawing and specified.

Lump sum price worked out by contractor for Construction, fabrication and erection of PEB Structures of Shed B for Solid waste management plant complete all as shown on drawing and specified.

Lump sum price worked out by contractor for Construction, fabrication and erection of PEB Structures of Shed C for Solid waste management plant complete all as shown on drawing and specified.

Lump sum price worked out by contractor for Construction, fabrication and erection of PEB Structures of Shed D for Solid waste management plant complete all as shown on drawing and specified.

Lump sum price worked out by contractor for Construction of, fabrication and erection of PEB Structures PEB Shed E for Solid waste management plant complete all as shown on drawing and specified.

Lump sum price worked out by contractor for Construction of Santry post as shown in drawings attached for Solid waste management plant as shown on drawing and specified.

Lump sum price worked out by contractor for Construction of static water tank (SWT) of capacity 50 KL as shown in drawings attached complete for Solid waste management plant as shown on plan drawing and specified.

Schedule `A' Part -II

Supply, installation, testng and commisioning of Trommel Screen of capacity 3 TPH of following specification 1. Body : Heavy-duty epoxy painted mild steel sheet conforming to IS: 1079 2. Screen Type : Single screen type bolted and Replacable. 3. Shell outer Diameter : 1200 mm 4. Ring Diameter : 1500 mm 5. Hole Size : 70 mm 6. Inclination : 5 -7 Degree 7. RPM : 8-10 (Variable through variable Frequency Drive) 8. Power Supply : 3 Phase (440 v , 50 Hz) 9. Motor (2 no.) : 3.7 KW (SHP) 4-Pole, 1420 RPM, AC INduction Motor with Copper Winding 10. Brand of Motor : CG/ABB or equivalent. 11. The motor starter with complete control panel of Trommel Screen as per recommendation of OEM. Note :- Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Segregation Conveyor (9 meter long) of following specification:- 1. Body : Heavy-duty epoxy painted steel sheet. 2. Size : 1000 mm wide X 9000 mm long. 3. Motor capacity : 3HP x 3 Phase, 4-Pole, 1420 RPM, AC Induction 4. Brand : CG/Fener/ABB or equivalent. 5. Belt spec. : 1000 mm wide, 3 ply, 10 mm thk. 800 mm height 6. Belt material : Rubber. 7. Conveyor position : Horizontal. 8. No. of Belts : 3 No. 9. Speed Control : 1600mm/Min to 9000 mm /Min 10. Conveyor guard/rails : 152 mm 11. Carrying & Return Roller : 76 mm ID Pipe with cast iron housing 12. Guide Roller :- 63 mm ID pipe with Cast iron housing 13. Belt Guide :- 04 Nos 14. Drive Pulley :- 320 mm outer Diameter (OD) with crowning surface with 70 mm shaft with rubber coating and herringbone design 15. TaiI PulIey : 320 mm OD with crowning surface with 65 mm shaft with rubber coating and herringbone design. Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

16. Pulley RPM :54-60 17. Speed Reduction SeaIed worm gear C-Face speed reducer No. 50(ANSI) roller chain to drive pulley 18. End Drive : Located on discharge end of conveyor, chain guard on appropriate side. 19. capacity : Maximum load per linear meter of conveyor 125 kg 20. Bearings : SeaIed pre-lubricate ball bearings, self-aligning, ball Bearings (P or T type) Drive and tail pulleys 21. Floor supports As per requirement 22. Accessories & parts ISI standards 23. Snub Idler Adjustable 900 mm dia, pre-lubricated ball bearings guards included 24.Return Idler Adjustable 9O mm dia, pre-lubricated ball bearings 25. User manual simplified process, Installation & Demonstration Yes 26. Bed Type : Flat Bed, 150mm deep x 02 mm thick mild steel slider bed, standard 2500 mm L-sections bolt together with splice plates 27. Body material : ISMC 100 x 50 mm Confirming to SP:06(1) 1964 28. Belt tensioner : 2 nos. 29. Idler spacing : Carrying =1000mm & return=2000 mm 30. The Motor starter with complete control panel of Conveyor as per recommendation of OEM. Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Segregation Conveyor (7 meter long) of following specification:- 1. Body : Heavy-duty epoxy painted steel sheet. 2. Size : 700 mm wide X 7000 mm long. 3. Motor capacity : 3HP x 3 Phase, 4-Pole, 1420 RPM, AC Induction 4. Brand : CG/Fener/ABB or equivalent. 5. Belt spec. : 700 mm wide, 3 ply, 10 mm thk. 800 mm height 6. Belt material : Rubber. 7. Conveyor position : Horizontal. 8. No. of Belts : 3 No. 9. Speed Control : 1600mm/Min to 9000 mm /Min 10. Conveyor guard/rails : 152 mm 11. Carrying & Return Roller : 76 mm ID Pipe with cast iron housing 12. Guide Roller :- 63 mm ID pipe with Cast iron housing 13. Belt Guide :- 04 Nos 14. Drive Pulley :- 320 mm outer Diameter (OD) with crowning surface with 70 mm shaft with rubber coating and herringbone design 15. TaiI PulIey : 320 mm OD with crowning surface with 65 mm shaft with rubber coating and herringbone design. Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

16. Pulley RPM :54-60 17. Speed Reduction SeaIed worm gear C-Face speed reducer No. 50(ANSI) roller chain to drive pulley 18. End Drive : Located on discharge end of conveyor, chain guard on appropriate side. 19. capacity : Maximum load per linear meter of conveyor 125 kg 20. Bearings : SeaIed pre-lubricate ball bearings, self-aligning, ball Bearings (P or T type) Drive and tail pulleys 21. Floor supports As per requirement 22. Accessories & parts ISI standards 23. Snub Idler Adjustable 900 mm dia, pre-lubricated ball bearings guards included 24.Return Idler Adjustable 9O mm dia, pre-lubricated ball bearings 25. User manual simplified process, Installation & Demonstration Yes 26. Bed Type : Flat Bed, 150mm deep x 02 mm thick mild steel slider bed, standard 2500 mm L-sections bolt together with splice plates 27. Body material : ISMC 100 x 50 mm Confirming to SP:06(1) 1964 28. Belt tensioner : 2 nos. 29. Idler spacing : Carrying =1000mm & return=2000 mm Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of wet waste shredder (250 KGS Per Hour) Type : Twin shaft shredder. Body : Heavy-duty epoxy painted steel sheet. Motor capacity : 10 HP x 3 Phase Brand : CG/fener/ABB or equivalent Starter : Siemens Star Delta with control panel. Chamber size : 600 mm X 400 mm X 200 mm. Blades : Hardened alloy steel . Shredded output size : 25 mm. material to be shredded ; wet waste Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Bailing Press (25T) 1 Length x Width x Height (mm x mmx mm) 540 X 680 X 2600 2 Machine material Mild Steel (Confirming to IS:10748 and IS: 2062 as applicable) 3 Type Vertical Single Cylinder 4 Capacity of Machine 25 Tons (Jack force) 5 Chamber size 540mm x 450mm x 1200mm 6 Weight of Bale (kg) 40kg —50kg 7 Cycle time per bale 12min — l5min 8 Number of Cylinder 1 9 Stroke length 1100 mm 10 Platform size 540 x 450 mm 11 Bale size 540mm x 450mm x 450mm 12 Machine powder coated Yes 13 Cylinder size 65 mm 14 Operation Hand Lever Operation System 15 Motor 5.22 kw (7 HP) copper winding, AC inducting motor, 3-phase, (440 V 50Hz) 16 Thickness of body plate 8 mm 17 Number of doors 4 nos 18 Thickness of Clamping plate 30 mm 19 Accessories & parts Confirming to BIS standards 20 Bale Ejection By side door 21 Hydraulic oil tank capacity 120 litre 22 Drainage system for residue Fluid / liquid Yes 23 Number of Rope ties 2 nos 24 Approx weight 850 kg 25 Manual Yes 26. The motor starter with complete control panel and its connections as of Trommel Screen as per recommendation of OEM. Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Hamer mill grinder with conveyor for input& output material 1 Machine Hammer Mill Grinder 2 Type Chopped Material 3 Capacity 1200 KG/H 4 Final Size output 90-95 % Less than 6mm 5 Production Capacity 700 Kgs/ Hr ±10% 6 Power Connection 440 V , 3 Phase 7. Size (All over) : 20’x15’x20’ (Including discharge conveyor) 8.Electrical Motors (ABB/Siemens) and Panel (CPRI) approved in included Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Flash Dryer: Type : Hot air tunnel type. Body : FRB lining – MS body. Motor capacity : 5 HP x 3 Phase with gearbox. Brand : CG/ABB or equivalent with extra grill. Tunnel size : Ø 1200 mm X 5000 mm long. Blowers : 9 nos. Blower make : Bosch. Note : Motor starter with control panel & its connections as per OEM recommedatetion deemed included in the quoted rates.

Supply, installation, testng and commisioning of Pellet Press Machine of following specification: 1. Body : Heavy-duty epoxy painted casting. 2. Motor capacity : 25 HP x 3 Phase. 3. Brand : CG/ABB or equivalent with extra grill. 4. Machine size : 380 mm (W) X 1350 mm (L) X 1040 mm (H) 5. Die : 12 mm thk. 6. Output : 150-200 kg/hr. (approx.). 7. Machine Pelleting Press 8. Pellet Diameter 8-10-12MM 9. Pellet Length 10MM to 40MM 10. Moisture Content of Raw Material Moisture Content of Raw Material 11. Raw Material Size Powder Form 12. Production Capacity 700 Kgs/Hr ±10% 13. Power Connection 59HP or 44KW 14. Practical Power Load Used 30 to 55 Amps 15 The Motor Starter with complete control panel of Pallet press as per recommendation of OEM.

Lump sum price worked out by contractor for "Site clearance" as listed in Schedule `A' Part-III *Above/below the lump sum price inserted by the MES in Schedule `A' Part-III

Lump sum price worked out by the Contractor for "ROAD & PATH" as listed in Schedule ‘A’ Part-IV *Above / below the lump sum price inserted by the MES in Schedule ‘A’ Part-IV

Lump sum price worked out by the Contractor for "HARD STANDING" as listed in Schedule ‘A’ Part-V *Above / below the lump sum price inserted by the MES in Schedule ‘A’ Part-V

Lump sum price worked out by contractor for "RCC HUME PIPE" as listed in Schedule `A' Part-VI *Above/below the lump sum price inserted by the MES in Schedule `A' Part-VI

Lump sum price worked out by the Contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VII *Above / below the lump sum price inserted by the MES in Schedule ‘A’ Part-VII

Lump sum price worked out by contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule `A' Part-VIII *Above/below the lump sum price inserted by the MES in Schedule `A' Part-VIII

Lump sum price worked out by contractor for "AREA DRAINAGE" as listed in Schedule `A' Part-IX *Above/below the lump sum price inserted by the MES in Schedule `A' Part-IX

Lump sum price worked out by contractor for "EARTH WORK AND EXCAVATION" as listed in Schedule `A' Part-X *Above/below the lump sum price inserted by the MES in Schedule `A' Part-X

Lump sum price worked out by contractor for "INTERNAL ELECTRIFICATIONS" as listed in Schedule `A' Part-XI *Above/below the lump sum price inserted by the MES in Schedule `A' Part-XI

Lump sum price worked out by the Contractor for Schedule `A' Part-XII (MISC SCHEDULE) (rate against Srl No.12.01 to 12.07 shall be quoted by the Contractor)

M&L for boring of existing road/path for laying of GI pipe protection for UG cable etc including making good distrurbed area/surface all as specified and directed.

Supply & fix LT panel out door (Canopy type) type, weather & vermin proof MS sheet housing 3.15mm thick, powder coated over a coat of primer, double door, front & rear openable type, mounted on 40x40x6 mm angle iron frame, floor mounted type with one MCCB, 4 pole, 125 Amp, 25 KA 415 volts as (incomer) and 63 Amp 4 pole (outgoing)-02 Nos, 40 Amp 4 pole MCCB -02 (Outgoing) Nos copper bus bar 200 Amp of length not less than 60 cm, 4 pole duly drilled with holes for cable connections, after due approval of panel drawing including PCC pedestals of suitable size, removal of old unsv panel, making good the area complete all as specified and directed by Engr-in-charge.

S&F polycarbonated unbreakable Junction box with fuse provn and suitable connection for three phase incoming cable, single phase out going cable endorsed in thermo plastic enclosure. Shock proof safe IP 65, weather proof, rust proof, dust and water proof internally embedded gasket with provn for cable entry through glade of size 200x160x98mm along with MS Clamps copper bus bar for three phase connection and 02X MCB SP 6 Amp 10 KA incl single phase 2.5 sqmm copper conductor PVC sheathed as required at site for electric connection to LED lights and connecting wire from JB to LED fitting as required complete all as specified directed.

M& L for cutting/welding of existing header for connection of new pipe line 80 mm dia including fitting fixture like flange,tee, bend and as directed by EIC.

Construction to brick masonary valve pit/ chamber of size 600x750x600 mm and including necessary excavation and earth work, PCC, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock complete all as specified and directed.

Supply and fix Metal body turboforce wall mounted fan of 600 mm sweep and fixed with wall or MS section with suitable size anchor bolts or GI strip complete all as specified and directed.

Supply and fix LED industrial lighting 120 Watt round highbay in PDC housing suitable for industrial application and efficacy upto 130 to 150 LPW, SPD included, IP 65 with necessary fixtures required for mounting the light, suitable brackets, nuts, bolts and fixing PVC conduit for cable/wire protection upto PVC terminal box all as specified and directed. Make: Havells Cat Part SAUCERNEO 120W LED 75790DTOLTG or Equivalent in Phillips/bajaj/Crompton/Orient/Surya

M/s Rohit Construction Co. (BID ID -3149096)

meenakshi construction (BID ID -3149216)

Bidder Name

meenakshi construction