RENOVATION OF NATHUWAS AND SIHAD POND, NATHDWARA.

Amount

Renovation of Nathuwas

Providing & Fixing Garden Bench (Victorion ) made of cast iron having height of 78 cms and seating lenth of 150 cms width 65 cms (Three Seats) it may very also as per requirement and both sides of garden benches is connected with tube of 65x25 mm having 16 gauge, having four legs for support purpose and one M.S Support at middle of the benches of extra strength and durability with hand rest and all sharp and rough edges of benches is to be grinded with grinder. and this benches is having the provision of hold-fast system (for grouting ). Approx weight of each Benches should not be less than 100 kg. complete with a coat of red oxide and with two coat of enamel of quality paint to give an even shade in green/any other colour finally specified by engineer incharge . Benches is finally assembled with nuts & bolts (fasteners) for fixing at the as per drawing/photographs. Bench is Suitable for three persons sitting Supply will be taken at site.

Providing and fixing sand stone bench of size 2000x 500mm and 450mm high. The bench to be made using 100mm thick Banshipahadpur sand stone slabs with carving and 2 No's carved supports size of 200x500x350mm of approved type using relevant fixing details as required or as directed by the Architect Item to include necessary fixing details fixing of bench on floor if required cleaning and hand polishing of sand stone surfaces etc. complete.

Providing,carving and Fixing of interpretive signages made out of Bansi paharpur white stone of size 750x1050x50 mm on inclined plane .Engraving of letters & Painting with black enamal paint & size of latter complete as per drawing and design.The signage stone shall be fixed on the post of same stone of size 400x400 x 1050 above ground and 1/3 of total height of post shall be embedded in ground with necessary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

Providing & Fixing of interpretive signages made out of Bansi paharpur white stone of size 450x450x50 mm on inclined plane .Engraving of letters & painting with black enamal paint & size of latter complete as per drawing and design.The signage stone shall be fixed on the post of same stone of size 280x280 x 150 ground and Above 860X100 mm of total height of post shall be embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

Providing & installing of high relif mural 3d art work made of fiberglass (FRP) with Bronze patina finish. As per direction of Engineer incharge.

Painting of mural on finished cemented floor with acrylic/PU paint. The finished artwork to have a complete protective (epoxy) clear coat as per design & drawing and directions of Architect Consultants

Providing and Fixing Stainless Steel Dustbins consisting of 2 stainless steel container (4mm thick) of size 400 mm dia and 600 mm height fixed with pivot system supported 75x75x4mm mm thick Stainless steel box sections grouted in base made out of 100mm thick P.C.C. including foundation works. All works to be complete as per drawing & design and as directed by engineer in charge

Providing & fixing of Arches 100mm thick with pillers size (0.6x0.6x2.67m), highly decorative creepers, flower of small sizes etc.in sand stone as per old trditional practices(Arches, Mehrab's) ornamental flowering/design etc. The work is to done with all leads and lifts as per work of restoration nature as per direction of Engineer incharge. Total Height arch with piller 4.93M

Providing & fixing of 5 feet Sculpture with Fountain made of Alloy metal mixture 80 to 85 % copper,15 to 20% led, tin & zinc . All works to be complete as per drawing & design and as directed by engineer in charge

Providing & fixing of 8 feet Sculpture made ofAlloy metal mixture 80 to 85 % copper,15 to 20% led, tin & zinc. All works to be complete as per drawing & design and as directed by engineer in charge

Providing Fixing of Floating Boat Fountain size of 10ft. Length made of metal structure, stainless still based finish with pu coated polish illumation with lighting All works to be complete as per drawing & design and as directed by engineer in charge

surface Aerators - UN/SUF50 –5.0HP/3.75kw Surface Floating Aerator,frame with mooring hooks in SS304 materials,Motor will be special " Unolex " make STD TEFC , 415 V, 3 phase, 50 HZ having , IP : 55 protection with pvc canopy,Impeller SS 304 will be special high efficiency turbine type with minimum oxygenation capacity of 1.5kg/kw,Additional Cable 4mm Flat Cable,LED Lights will RGB multiple colour 12V/36w(9W/4Nos.) with control panel with waterproof material

Installation and Fixing of LED spike light 10W in garden including all labour & Fittings charges with two year defect liability

Installation and Fixing of aluminium Profile light in garden including all labour & Fittings charges with two year defect liability

Installation and Fixing of Wall Washer light 600 mm length , 18 Watt in garden including all labour & Fittings charges with two year defect liability

Providing and fixing PVC sockets of 150-200mm on the vertical phase of masonry from outside of pond using polymer/epoxy mortar

Injecting the cement grout prepared in cement, BS Smartbond 100 and grouting additive Flowcable 50 (cement 1 part, water 1.5 part , BS Smartbond 100 20 kg per bag of cement and grout additive Flowcable 50 300 gm per bag of cement)

Fixing the one way brass packers of 150-200mm long keeping the distance of 150mm to 300mm from the socket fixed cementitious grout

Injecting the epoxy grout prepared in BS Epoxy 611 system in to the packers fixed after 4 days of cement grouting

Opening the stone masonry joints by mechanical means and filling them by polymer mortar using cement and sand in ratio 1:2 and polymer compound BS Smartbond 100 @ 3 kg per bag of cement

STP of 0.65 MLD on MBBR technology or latest technology with 1 year O&M. Including survey, investigation, Designing and drawing(Design and drawing must be approved from MNIT on bidder cost), all civil work, mechanical work and electric work with power backup DG set.

Renovation of Sihad Pond

Providing and fixing sand stone bench of size 2000x 500mm and 450mm high. The bench to be made using 100mm thick Banshipahadpur sand stone slabs with carving and 2 No's carved supports size of 200x500x350mm of approved type using relevant fixing details as required or as directed by the Architect Item to include necessary fixing details fixing of bench on floor if required cleaning and hand polishing of sand stone surfaces etc. complete.

Providing & Fixing of interpretive signages made out of Bansi paharpur white stone of size 450x450x50 mm on inclined plane .Engraving of letters & painting with black enamal paint & size of latter complete as per drawing and design.The signage stone shall be fixed on the post of same stone of size 280x280 x 150 ground and Above 860X100 mm of total height of post shall be embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

Providing and Fixing Stainless Steel Dustbins consisting of 2 stainless steel container (4mm thick) of size 400 mm dia and 600 mm height fixed with pivot system supported 75x75x4mm mm thick Stainless steel box sections grouted in base made out of 100mm thick P.C.C. including foundation works. All works to be complete as per drawing & design and as directed by engineer in charge

Painting or mural in any medium on canvas or wall surface painting, etc. works symbolizing local cultural heritage & history of the place

Manufacturing, Fabrication, Painting & Installation of 100% detachable Victorian Style Decorative ornamental Cast Iron GAZEBO in Square Shape . Overall size of Gazebo should be 305 cm X 305 cm in Square Shape & total height is 320 cm. The roof should be in Square shape & outer size of roof must be 305cmX 305cm (Square), having slop of 87 cm. The roof should be in four parts & made up of Glass Fiber Reinforcement. Thickness of roof must be 3mm with Traditional Kavelu Design, each roof part must be joint less, Triangular in shape & its size is 313cm X 231cm X 231cm, which should be supported on Heavy duty MS pipe of size 5cmX2.5cm thk-2.5mm. Roof should be fix on Four Victorian Style Decorative ornamental Cast Iron Pole of height 245 cm & base size 31cm dia in Round shape. Thickness of all cast iron part must be 1.5 cm. For fixing of Top Grill & Support Corner Grill on Pole, Pole must have M.S Pipe of size 16.5 cm & thk 4.0mm. Cast Iron Top Grill Quantity - 4 Nos. Specification - 226 cm X 32cm, Thk.-1.8cm, fabricated with MS frame size of section of 37mm X 9mm welded with C02 welding by using copper coated wire size 0.8mm. Cast Iron Support Corner Grill Quantity - 8 Nos. Specification - 88cm X 88 cm, Thk- 1.8cm & Cast Iron Bottom Railing Quantity - 2 Nos. Specification - 226cm X 61 cm, Thk- 1.8 cm, Fabricated with D type MS pipe for handrail, size of D section is 50mm X 35mm welded with C02 welding by using copper coated wire size 0.8mm. Nut Bolt for connecting all these parts should be of SS 304 grade. Different size of Nut Bolt required as per specification as indicated here by: 1. For fixing roof – 8x40 sized nut bolt, 2. For fixing Top grill – 8X40 sized nut bolt, 3. For fixing Bottom railing – 8x25 sized nut bolt, 4. For fixing Support corner – 8x40 sized nut bolt. All this above parts made of cast iron castings must be of FG-15 grade as per IS 210 (1993) standard. Tensile strength must be in range between 150 BHN to165 BHN. Cast iron must have Chemical composition of Carbon -3.9% to 4.2% & Silicon- 1.9% to 2.4%, for giving proper Welding property with MS sections. Colour specification & Finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting or SAND blasting process, after than all MS parts are doing ZINC PLATING of 25 micron thickness with the help of 7 tank cleaning process. After than again same zinc plated parts are expose through mild shot or sand blasting over all zinc plated surface. Than use metal coat primer as a first coat, than second coat will be also done by metal coat finish (in require shade). After than giving antique shades (in require shed) by using metal powder. At last use PU clear (to prevent ultra violets ray) of thickness 20 to 25 micron.

Providing & fixing of Sculpture Head of Srinathji 6.4 M height The sculpture shall be made of Asht Dhatu (alloy of eight metals) through lost wax casting method. The composition of Asht Dhatu should be as under copper 85% maximum allowable range between 80% to 85% Zinc, Tin , Lead- 15% (maximum allowable range between 13% to 17%)Wall thickness of the cast asht Dhatu should not be less than 4-5 mm. Weight of the statue shall not be less than 3000 kg. Posture of the statue should be as per Approval photo with tender document ( the rates include the cost of clay Model/ready modal, wax casting and Asht Dhatu cast and it's fixing at pedestal constructed at required location. All works to be complete as per drawing & design and as directed by engineer in charge

Providing & fixing of Sculpture Shree Vallabh Aacharya ji - 3.2 M height The sculpture shall be made of Asht Dhatu (alloy of eight metals) through lost wax casting method. The composition of Asht Dhatu should be as under copper 85% maximum allowable range between 80% to 85% Zinc, Tin , Lead- 15% (maximum allowable range between 13% to 17%)Wall thickness of the cast asht Dhatu should not be less than 4-5 mm. Weight of the statue shall not be less than 1300 kg. Posture of the statue should be as per Approval photo with tender document ( the rates include the cost of clay Model/ready modal, wax casting and Asht Dhatu cast and it's fixing at pedestal constructed at required location. All works to be complete as per drawing & design and as directed by engineer in charge

surface Aerators - UN/SUF50 –5.0HP/3.75kw Surface Floating Aerator,frame with mooring hooks in SS304 materials,Motor will be special " Unolex " make STD TEFC , 415 V, 3 phase, 50 HZ having , IP : 55 protection with pvc canopy,Impeller SS 304 will be special high efficiency turbine type with minimum oxygenation capacity of 1.5kg/kw,Additional Cable 4mm Flat Cable,LED Lights will RGB multiple colour 12V/36w(9W/4Nos.) with control panel with waterproof material

Installation and Fixing of LED spike light 10W in garden including all labour & Fittings charges with two year defect liability

Installation and Fixing of aluminium Profile light in garden including all labour & Fittings charges with two year defect liability

Installation and Fixing of Wall Washer light 600 mm length , 18 Watt in garden including all labour & Fittings charges with two year defect liability

Providing and fixing PVC sockets of 150-200mm on the vertical phase of masonry from outside of pond using polymer/epoxy mortar

Injecting the cement grout prepared in cement, BS Smartbond 100 and grouting additive Flowcable 50 (cement 1 part, water 1.5 part , BS Smartbond 100 20 kg per bag of cement and grout additive Flowcable 50 300 gm per bag of cement)

Opening the stone masonry joints by mechanical means and filling them by polymer mortar using cement and sand in ratio 1:2 and polymer compound BS Smartbond 100 @ 3 kg per bag of cement

STP of 1.0 MLD on MBBR technology or latest technology with 1 year O&M. Including survey, investigation, Designing and drawing(Design and drawing must be approved from MNIT on bidder cost), all civil work, mechanical work and electric work with power backup DG set.