TCMC -Providing Deep Bore Well and arrangement of Water Supply Line,Shed and Repair Work at PV Vaithiyaligam Hospital in Ward No.21 Tambaram City Municipal Corporation Zone II

Charges for conducting Geophysical survey etc direction by the Departmental officers

Supply of 150 mm (Casing Shollow depth) 1.2 PVC Casing pipe with exces duty as per IS 12818/1992

Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer

Drilling of 150mm dia borewells in hard rock areas anywhere in Tamil Nadu including trasportion to the worksite in hard rock areas and developing the borewells

Supply,delivery and Fixing of 1.5 HP Compresser Motor With including trasportion to the work site in areas and developing

Supply and delivery of Following PVC and GI Specials etc., complete as per standard specifications

32mm GI borewell clamp

Black house 1 1/4 inch(32mm)

Nylon Rope

SS Nipple 1 1/4 inch

GI Bend 1 1/4 inch

GI 1 1/4 Coupling

32mm GI flange

4Sqmm Flat cable

32mm Dia PVC Pipe

25mm Dia PVC Pipe

32mm PVC Tee

32mm PVC Elbow

32mm x 25mm Reducer

25mm Dia Tee

25mm Dia Elbow

20mm PVC Tap

Angle Cock

110mm Soil Waste Pipe

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 25mm thick slab (using 10-12mm HBGS Jelly)

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Plane cement concrete M20 (Nominal mix) using 20mm and 1omm ISS HBG metal including cost and conveyance of all materials to site including cost of Cement at site including Cost of formwork, soft Water, labour charges from mixing, transporting, laying and curing concrete, working at depths, Hire charges for tools and plants for cement pavement work etc., complete as per relevant standard specification,

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (6 points / Coil) Higher End SD-283

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD-458

Supply and Fixing of 48W LED Street Light Fitting with LED with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips/Crompton/Havelles ) M-1291

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall SD-115

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan SD-120

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug & heater) SD-143

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete SD-131

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb SD-83

Supply and laying of 3.5 X 35Sqmm Sqmm PVC / XLPE armoured LTUG cable in the existing cable trench /cable tray SD-201

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 1.5 TR Split Type AC Unit

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Gurad / Equivalent) 1.5 TR Split Type AC Unit

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit 1.5 TR Split Type AC Unit

Supply and fixing of MS stand for fixing outdoor unit 1.5 TR Split Type AC Unit

Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

Damp proof course with Cement Mortar 1:4 (One Cement and Four plastering sand (P - Sand)) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Supply,Delivery and Fixing of Cub - Board at Hospital Store Room,pharmacy Store Room and Patient Room omplete complying with standard specification.