Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60,424Accepted-AOC 1 23 10 ROJA FIRST STREET ALAMEEN NAGAR SURVEYOR COLONY MADURAI 625 007 | MADURAI | TAMIL NADU | 625007 | ₹60,424 | L1 | Accepted-AOC LOWEST RATE FOR SL NO 2 8 AND 10 |
| 2 | L1₹1.2 LAccepted-AOC | ₹1.2 L | L1 | Accepted-AOC LOWEST RATE FOR SL NO 3 5 7 9 AND 11 |
| 3 | L1₹3.6 LAccepted-AOC | ₹3.6 L | L1 | Accepted-AOC LOWEST RATE FOR SL NO 1 4 AND 6 (1 NO ONLY) |
| 4 | Rejected-Technical 23 KULATHANGARAI STREET KULATHANGARAI STREET UTHIRAMERUR KANCHIPURAM TAMIL NADU 603406 | KANCHIPURAM | TAMIL NADU | 603406 | - | - | Rejected-Technical SPECIFICATION NOT MATCHED |
| 5 | Rejected-Technical 1ST FLOOR 64 NEW AJIT NAGAR NEAR C LAL HOSPITAL AMBALA CANTT 133001 TANGARI BANDHA AMBALA AMBALA HARYANA 133001 | AMBALA | HARYANA | 133001 | - | - | Rejected-Technical BRANCH OFFICE OR SERVICE CENTER NOT AVALIABLE WITH IN TAMILNADU |
| Sl No | Description | Qty | Unit | Perfect Machines Centre L1 | GM ELECTRONICS L3 | DB MECH INSTRUMENTS L2 |
|---|---|---|---|---|---|---|
| 1.00Supply of Equipment for Mechanical Engineering Department | ||||||
| 1.01 | LATHE MACHINE :
SPECIFICATION :
Bed: 2V & 2 Flat, induction hardened and ground
Minimum Bed Length: 1375 mm
Bed Width: 240 mm
Capacity:
Height of Centre: 165 mm Swing over Bed: 320 mm
Swing over Gap: 510 mm Swing over Cross Slide: 180 mm Distance between Centres: 650 mm
Slides: Cross Slide Travel: 200 mm
Compound Slide Travel: 115 mm
Spindle: Spindle Bore: 40 mm
Spindle Nose: Thread type, Ø62 mm
Spindle Taper: MT-3 Tail stock:
Quill Diameter: 38.1 mm Taper: MT-3
Travel: 120 mm Speed: No. of Speeds: Minimum 8
Range: (40–800 )RPM Threading: Metric: (1–6 )mm (min 13 steps) English: (2–24 )TPI (min 19 steps)
Lead Screw: (1” × 4) TPI Electrical: Motor: 1.5 HP, 230V/415V, 50 Hz Drive: V-belt Structure:
Bed: Close-grained cast iron (FG 260)
Gears: Hardened steel
Base: Rigid cast iron stand | 2 | Nos | 2,80,000 ₹3,30,400 Lowest | 3,57,600 ₹4,21,968 | 3,92,000 ₹4,62,560 |
| 1.02 | Open cup apparatus :
SPECIFICATION :
Standard Compliance: ASTM D92 / IS 1448 (Part 69)
Test Method: Open cup flash and fire point determination
Test Cup: Brass, precision machined with heat resistant handle
Heater: Electric heater (1000 W ±10% Nickel chromium) with variable control
Heating Rate: 5–6°C per minute (as per standard)
Temperature Range: -6 to 400°C
Thermometer: ASTM 11C or equivalent
Flame Applicator: Gas test flame with fine control valve
Body: Stainless steel housing
Display: Analog / digital temperature indicator
Power Supply: 230V AC, 50 Hz
Safety: Overheat protection Heat insulation | 1 | Nos | 20,000 ₹23,600 | 8,800 ₹10,384 Lowest | 13,000 ₹15,340 |
| 1.03 | CLOSED CUP APPARATUS :
SPECIFICATION :
Standard Compliance: ASTM D93 / IS 1448 (Part 21)
Test Cup:Brass cup
Diameter: 50.7–50.8 mm
Capacity: minimum 70 ml
Stirring System
Heater: Electric heater 650 W ±10%
Heating Rate: 1–12°C/min adjustable
Ignition: Pilot flame with automatic shutter mechanism
Temperature Measurement: Thermometer or digital sensor(IP-28C or ASTM)
Display: Digital temperature display
Power Supply: 230V AC, 50 Hz
Safety:Over-temperature cut-off
Flame safety control | 2 | Nos | 38,000 ₹44,840 | 29,600 ₹34,928 | 26,000 ₹30,680 Lowest |
| 1.04 | Tail stock Assembly :
SPECIFICATION :
Medium-duty tailstock assembly for dismantling & assembly
Quill Stroke: Minimum 75 mm
Taper: MT-3 (preferred standard)
Feed: Hand wheel operated
Features: Set-over screws for taper turning Spindle locking arrangement
Body: Cast iron (FG 260)
Spindle: Hardened steel | 1 | Nos | 16,000 ₹18,880 Lowest | - | 38,900 ₹45,902 |
| 1.05 | SLIP GAUGE :
SPECIFICATION :
Set Size: M87 (87 pieces) or equivalent
Range:
1.001 mm to 100 mm
Step sizes: 0.001 mm
0.005 mm
0.01 mm
Material:
High-grade alloy steel / tungsten carbide (preferred)
Hardness: HRC 63–65
Accuracy:
Grade: Grade 1 or Grade 2 Flatne
Flatness / Parallelism: ≤ 0.5 μm
Stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes | 1 | Nos | 29,000 ₹34,220 | 48,000 ₹56,640 | 27,000 ₹31,860 Lowest |
| 1.06 | DC Motor:
SPECIFICATION :
Type: DC Shunt Motor (Dismantling Model)
Power: Minimum 0.5 HP
Voltage: 220 V DC
Speed: 1500 RPM
Poles: 4 pole
Construction: Laminated stator
Salient poles
Accessible armature
Features: Cut section / open type
Suitable for dismantling and reassembly | 2 | Nos | 26,000 ₹30,680 Lowest | 35,600 ₹42,008 | 26,800 ₹31,624 |
| 1.07 | Hydraulic Cylinder :
SPECIFICATION :
Bore Diameter: 50 mm
Stroke Length: 250 mm
Working Pressure: 160 bar
Cylinder Tube: Honed steel
Piston Rod: Hard chrome plated
Seals: Standard industrial seals
End Caps: Steel
calibration grades include charts for exact sizes
Supply: Mounted on training base
Suitable for dismantling and inspection | 1 | Nos | - | - | 12,000 ₹14,160 Lowest |
| 1.08 | Hydraulic Operated Directional Control Valves (DCV):
SPECIFICATION :
Type: Manual spool type DC valve
Configuration: 4/2 way
Size: NG06 (CETOP 3)
Rated Pressure: 210 bar
Flow Capacity: 20–40 LPM
Body: Hardened steel / cast steel
Spool: Ground and hardened
Ports: Clearly marked (P, A, B, T)
Supply: Mounted on training plate
Suitable for dismantling and study | 1 | Nos | - | 18,800 ₹22,184 Lowest | 19,000 ₹22,420 |
| 1.09 | BEARING WITH SHAFT ASSEMBLY :
SPECIFICATION :
Bore Diameter: 50 mm
Stroke Length: 250 mm
Working Pressure: 160 bar
Cylinder Tube: Honed steel
Piston Rod: Hard chrome plated
Seals: Standard industrial seals
End Caps: Steel
Supply:Mounted on training base
Suitable for dismantling and inspection | 1 | Nos | - | 18,980 ₹22,396.4 | 16,500 ₹19,470 Lowest |
Tender Value
Refer Docs
EMD Value
₹5,000
Closing Date
13 Jul 2026, 10:00 amClosed
THE PRINCIPAL
GOVERNMENT POLYTECHNIC COLLEGE PALACODE
Supply of Equipment for Mechanical Engineering Department
2026_DoTE_682854_1
2670/A4/2026
Open Tender
Machinery and Machining Tools
Supply
GOVERNMENT POLYTECHNIC COLLEGE PALACODE
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹5,000
Yes
14 Aug 2026
25 Jun 2026
14 Jul 2026
25 Jun 2026
13 Jul 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply of Equipment for Mechanical Engineering Department | |||||
| 1.01 | LATHE MACHINE :
SPECIFICATION :
Bed: 2V & 2 Flat, induction hardened and ground
Minimum Bed Length: 1375 mm
Bed Width: 240 mm
Capacity:
Height of Centre: 165 mm Swing over Bed: 320 mm
Swing over Gap: 510 mm Swing over Cross Slide: 180 mm Distance between Centres: 650 mm
Slides: Cross Slide Travel: 200 mm
Compound Slide Travel: 115 mm
Spindle: Spindle Bore: 40 mm
Spindle Nose: Thread type, Ø62 mm
Spindle Taper: MT-3 Tail stock:
Quill Diameter: 38.1 mm Taper: MT-3
Travel: 120 mm Speed: No. of Speeds: Minimum 8
Range: (40–800 )RPM Threading: Metric: (1–6 )mm (min 13 steps) English: (2–24 )TPI (min 19 steps)
Lead Screw: (1” × 4) TPI Electrical: Motor: 1.5 HP, 230V/415V, 50 Hz Drive: V-belt Structure:
Bed: Close-grained cast iron (FG 260)
Gears: Hardened steel
Base: Rigid cast iron stand | 2 | Nos | - | - |
| 1.02 | Open cup apparatus :
SPECIFICATION :
Standard Compliance: ASTM D92 / IS 1448 (Part 69)
Test Method: Open cup flash and fire point determination
Test Cup: Brass, precision machined with heat resistant handle
Heater: Electric heater (1000 W ±10% Nickel chromium) with variable control
Heating Rate: 5–6°C per minute (as per standard)
Temperature Range: -6 to 400°C
Thermometer: ASTM 11C or equivalent
Flame Applicator: Gas test flame with fine control valve
Body: Stainless steel housing
Display: Analog / digital temperature indicator
Power Supply: 230V AC, 50 Hz
Safety: Overheat protection Heat insulation | 1 | Nos | - | - |
| 1.03 | CLOSED CUP APPARATUS :
SPECIFICATION :
Standard Compliance: ASTM D93 / IS 1448 (Part 21)
Test Cup:Brass cup
Diameter: 50.7–50.8 mm
Capacity: minimum 70 ml
Stirring System
Heater: Electric heater 650 W ±10%
Heating Rate: 1–12°C/min adjustable
Ignition: Pilot flame with automatic shutter mechanism
Temperature Measurement: Thermometer or digital sensor(IP-28C or ASTM)
Display: Digital temperature display
Power Supply: 230V AC, 50 Hz
Safety:Over-temperature cut-off
Flame safety control | 2 | Nos | - | - |
| 1.04 | Tail stock Assembly :
SPECIFICATION :
Medium-duty tailstock assembly for dismantling & assembly
Quill Stroke: Minimum 75 mm
Taper: MT-3 (preferred standard)
Feed: Hand wheel operated
Features: Set-over screws for taper turning Spindle locking arrangement
Body: Cast iron (FG 260)
Spindle: Hardened steel | 1 | Nos | - | - |
| 1.05 | SLIP GAUGE :
SPECIFICATION :
Set Size: M87 (87 pieces) or equivalent
Range:
1.001 mm to 100 mm
Step sizes: 0.001 mm
0.005 mm
0.01 mm
Material:
High-grade alloy steel / tungsten carbide (preferred)
Hardness: HRC 63–65
Accuracy:
Grade: Grade 1 or Grade 2 Flatne
Flatness / Parallelism: ≤ 0.5 μm
Stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes | 1 | Nos | - | - |
| 1.06 | DC Motor:
SPECIFICATION :
Type: DC Shunt Motor (Dismantling Model)
Power: Minimum 0.5 HP
Voltage: 220 V DC
Speed: 1500 RPM
Poles: 4 pole
Construction: Laminated stator
Salient poles
Accessible armature
Features: Cut section / open type
Suitable for dismantling and reassembly | 2 | Nos | - | - |
| 1.07 | Hydraulic Cylinder :
SPECIFICATION :
Bore Diameter: 50 mm
Stroke Length: 250 mm
Working Pressure: 160 bar
Cylinder Tube: Honed steel
Piston Rod: Hard chrome plated
Seals: Standard industrial seals
End Caps: Steel
calibration grades include charts for exact sizes
Supply: Mounted on training base
Suitable for dismantling and inspection | 1 | Nos | - | - |
| 1.08 | Hydraulic Operated Directional Control Valves (DCV):
SPECIFICATION :
Type: Manual spool type DC valve
Configuration: 4/2 way
Size: NG06 (CETOP 3)
Rated Pressure: 210 bar
Flow Capacity: 20–40 LPM
Body: Hardened steel / cast steel
Spool: Ground and hardened
Ports: Clearly marked (P, A, B, T)
Supply: Mounted on training plate
Suitable for dismantling and study | 1 | Nos | - | - |
| 1.09 | BEARING WITH SHAFT ASSEMBLY :
SPECIFICATION :
Bore Diameter: 50 mm
Stroke Length: 250 mm
Working Pressure: 160 bar
Cylinder Tube: Honed steel
Piston Rod: Hard chrome plated
Seals: Standard industrial seals
End Caps: Steel
Supply:Mounted on training base
Suitable for dismantling and inspection | 1 | Nos | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.59 MB
Tendernotice_2.pdf
PDF • 0.14 MB
BOQ_820883.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .