PROCESS CHEMICAL

Amount

Anti Scalant (Food Grade) Physical Appearance - clear, light coloured, viscous liquid, Anionic Character : non-anionic PH : 7 +/- 0.2, Solubility in water : completely soluble Effectiveness : at normal working condition of sugar mills time lag between two general cleanings should be 45 days. Dose : 8 PPM Food grade certificate must be attached

Viscosity Reducer (Fatty Acid/oil based) for A & B Pans

Viscosity Reducer (Polyacralamide based) (Food Grade) Certificate for 30% TFM(Total Fatty Matter) must be attached Food grade certificate must be attached. Dose - 900 gm per 40 Ton of C-m/c

Biocides BKC based Active matter should be 50% w/w , material ( Food grade) Free amine content -1% Max. , Specific gravity -0.97 pH-7.5 ±1 , Pack Size -HDPE carboys -40/50 Kg,

Biocides DTC based Board Spectrum dithiocarbamate base biocide free from any pesticidal residue and approved by FDA. (Food grade) Active matter should be 45% w/w material pH -8.5 , Specific gravity -1.15-1.2, Pack Size -HDPE carboys -40/50 Kg,

Floculant (Food Grade) It should have high molecular weight, non-toxic, anionic, polyacralamide& free flowing white granular powder and its particle size should be 98% less than 1000 Micron, pH at 1% solution should be 6.8 to 7.8, free acralamide less than 0.05%. Lot No., Manufacturing and expiry date should be mentioned on Bags. Dose – 1-2 PPM Food grade certificate must be attached

Magnafloc LT-27 in original and imported packing It should have high molecular weight, non-toxic, anionic, polyacralamide& free flowing white granular powder and its particle size should be 98% less than 1000 Micron, PH at 1% solution should be 6.8 to 7.8 free acralamide less than 0.05%. Lot No., Manufacturing and expiry date should be mentioned on Bags.

Caustic soda flakes Rayon grade confirming to IS/252/1923 having minimum 99.5% purity by weight packed in 50 kg. HDPE bags Make- Grasim/GACL/Tata

Scale Softener - It should be non-foaming type, reduce surface tension, having high penetration of loosening the scale in the evaporator tubes, it should be Completely Soluble in water, pH : 12 +/- 1 (10 % Aqua Solution) Polyacralamide

Colour Wash (Polymer based) (Food Grade) for addition in Mixed Juice. ICUMSA Colour should be below / equal to 100 Dose - 7 PPM Food grade certificate must be attached

Phosphoric acid Phosphoric acid of 85% H3 PO4 and 65% active content (P2O5) (food grade) Make- DCM/GACL/Exel/SIEL/BILT/Ballarpur

Alezine (Food Grade) or equivalent (Specific gravity 1 to 1.25 base polyacramide soluble in water). Dose:- Mixed Juice - 65 gm of Alezine should be equivalent to 1 Kg Phosphoric Acid. For Syrup Clarification system - 2 PPM. Food grade certificate must be attached

Antifoam Polymer Based Active content 40% TFM(Total Fatty Matter) Food grade certificate must be attached

Bleaching Powder original packing of the manufacturer ( Chlorine %age-30%) DCM/PALL/GACL/Exel/modi/SIEL

Sugar Seed Slurry Size 3 to 5 micron, SP Gravity 1.89gm/ cm3 , Coefficient of variation 3% only , It should be prepared in special designed Machine using isopropylalcohal and free from agglomerate. Packed in plastic container

Chemical for Syrup Clarification Plant Color Precipitant (food Grade) should be polymer base, discoloring agent Dose - 12 PPM

Flocculent (Food Grade) for Syrup Clarification Plant. Dose – 1 to 2PPM Food grade certificate must be attached

Washing soda 99% sodium carbonate, dosing -11.8 PPM

Rodine chemical acid corrosion inhibitor dosing -1.81 PPM

Rockwine- SQ chemical sulphmic acid dosing-18.7 PPM

commercial HCL consentration 36% - As required dosing-4.5 PPM

Comman salt Sodium chloride (oderless) solubility 360 gm/ltr (25ᵒ C) dosing -5 PPM

Chemical for Melt Clarification Plant Flocculent MCS-2 pH range -7-8/ food grade dosing -1.8 PPM For floc development in melt clarifier food grade certificate must attached

Chemical for Melt Clarification Plant Colour Precipitant , Aqueous solution of cationic polymers , purity 87% food grade certificate must attached

Membrane saver chemcial dosing- 0.5 PPM

Anti bacterial chemcial dosing- 1.1 PPM

cleaning chemical dosing - 1.5 PPM

Perservative /formaldeyhade dosing - 1.5 PPM

PH booster (cooling tower) Type-Liquid solubility - water soluble smell- pungent, grade- industrial dosing-2.25 PPM

Formaldehyde Methanal (organic compound) aqueous solution of 37% formalin dosing- 0.3 PPM

Molasses preservative Molasses TRS control dosing-1.2 PPM

Dextranase Glycoside hydrolase/food grade dosing -0.3 PPM

Starch 20-25% amylase and 75 to 80% amylase pectin/ food grade dosing-4 PPM

Alum or PAC Poly aluminum chloride (PAC) sp. Gravity-1.2 (20ᵒ C) 10-10.6 % as AI₂ O₃

Cationic Polyelectrolyte Organic solvent water soluble dosing-3-4kg/day

HARLIN ENTERPRISES (BID ID -576173)

AGRO FORGINGS (BID ID -580634)

Chemical Centre (India) (BID ID -580660)