Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.3 L+₹2.8 L (8.03%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹38.2 L+₹3.7 L (10.6%)Rejected-Finance VILLAGE RATGANHA CHAIL DISTT KAUSHAMBI U P PIN 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
PLENARY B/R REPAIR WORK TO LEFT OVER UNITS AND CENTRAL INSTITUTE UNDER AGE B/R I AT NEW CANTT PRAYAGRAJ
2024_MES_661426_1
8742/E8
Open Tender
Civil Works
Works
270 days
NEW CANTT PRAYAGRAJ
As per tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
14 Oct 2024
22 Jun 2024
27 Jul 2024
22 Jun 2024
20 Jul 2024
6 Jul 2024
Amount
Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.
Demolition of cement concrete including floor tiles or stone in any description and in any position not otherwise specifically provided for and removal from site complete all as specified and directed.
Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.
Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified & directed.
Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.
S&F MS framed work as in doors frame, doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified.
M&L for flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face with particle board core complete all as specified and directed.
Dismantling of old unserviceable hinge / tower bolt / handle / sliding bolt and other doors or window fittings as required for replacement complete all as specified and directed.
S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.
S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.
S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.
S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.
S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.
S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed.
Dismantling timber framed filled rails, post, rafters purlins, etc under 40 sqm in section complete all as specified and directed.
S&F plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood, sectional area exc 3 Sqcm but not exc 6 Sqcm complete all as specified and directed.
S&F plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood, sectional area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed.
S&F framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed
Supply only galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm for new door / window shutter complete all as specified and directed.
Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 4.8mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.
S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.
S&F for 18 mm thick 100% Solid PVC laminated board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite / Borer Free, water / moisture proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces for kitchen cabinet shutter complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.
S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. Make: Hettich Cat part No.9281432 or any other make as approved by GE.
S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed. Make: Hettich : Cat part No.9113468 or any other make as approved by GE
Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M & L for brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25 mm thick plain cement concrete type B1 1:2:4 (20mm graded aggregate) as in levelling course on floor and other similar works complete all as specified and directed.
M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n exc 0.11 Sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n exc 0.11 Sqm as in skirting / dado etc , set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 10 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
M&L joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L joint free vitrified ceramic double charged coloured / wooden texture tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for Vitrified Ceramic coloured double charged coloured / wooden texture tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for 18 to 20 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete in repairs all as specified and directed.
M&L for 18 to 20 mm thick machine cut kota stone as in riser of step, dado and skirting over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete in repairs all as specified and as directed.
M&L for grinding / mirror polishing ( wax polish) on existing kota stone flooring complete all as specified and directed.
M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer i.e.. cement mortar (1:6) complete all as specified and as directed.
M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick sand cushion and joints filling with sand complete all as specified and directed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, sub base etc complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified.
M&L for plain cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cement including taking down existing concrete complete all as specified and directed.
M&L RCC type B-1 1:2:4 using 20mm graded stone aggregate as in kitchen shelves etc including demolition of old slab complete all as specified and directed.
M&L form work to suspended slab as in kitchen shelves etc complete all as specified and directed.
M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns, hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed.
Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.
Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for 10mm thick plaster in CM 1:3 mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. Note:- Liquid water proofing compound shall be measured & paid separately.
Cleaning the dust, dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per Sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torch on method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)
Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non accessible roof area complete all as specified and directed.
All as per Srl item No. 69 but except tile complete all as specified and directed. Note - Brick tile obtained from dismantling shall be used.
Applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm on water proofing treatment with preparation of surface as on non accessible area complete all as specified and directed.
M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust, dirt and any other foreign material, fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torch on method complete all as specified and directed.
M&L for plain cement concrete 1:5:10, type E2 using 40 mm graded aggregate as in sunken filling and mass concrete works complete all as specified and directed.
M&L for 40 mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed.
Disconnecting existing water tanks, 500 to 1000 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.
S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F vitreous china white wash down water closet pan 250 mm x 585 mm x 415 mm wall hung including fixing bolts, UF soft close seat cover, hinging device complete all as specified and directed. Make:- Jaquar Cat Part No. OPS-WHT-15951UF or equivalent make as specified in P.S.
S&F single piece concealed cistern with floor mounting frame installation kit and S-type drain pipe connection set for wall hung WC with flush control plate and frame complete all as specified and directed. Make:- Jaquar Cat Part No. JCS-WHT-2400FS or equivalent make as specified in P.S.
S&F flush control opal complete all as specified and directed. Make:- Jaquar Cat Part No. JPC-CHR-152415 or equivalent make as specified in P.S.
S & F in repair vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white, seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repair WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and including lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.
S&F for in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of supply and fixing of waste pipe, waste fitting and union complete all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.
S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.
S & F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.
S&F in repair CP angle stop cock/valve of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..
S&F in repair 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads, long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.
S&F for Maze overhead shower 200 mm X 200 mm Square shape single flow (body & face plate SS with chrome finish) with rubit cleaning system complete all as specified and directed. Make :Jaquor Cat part OHS-CHR-1619 or equivalent make as specified in P.S.
S & F in repair for 90 to 125 mm size fancy type chromium plated shower rose with swivel joints, and connecting rod including fixing to steel pipe or union complete all as specified and directed.
S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed. Make :Jaquor Cat part SHA-CHR-479L450 or equivalent make as specified in P.S.
S&F for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. Make :Jaquor Cat part OPS-WHT-15905 or equivalent make as specified in P.S.
S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-705L130 or equivalent make as specified in P.S.
S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent make as specified in P.S.
S&F two way angle cock with wall flange complete all as specified and directed. Make : Jaquar Cat part KUP-CHR-35041PM or equivalent make as specified in PS.
S&F toilet paper holder with flap fancy type chromium plated complete all as specified and directed. Make : Jaquar Cat part AQN-CHR-7753 or equivalent make as specified in PS.
S&F wall mixer with provision of over head shower with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed. Make : Jaquar Cat part COP-273PM or equivalent make as specified in PS.
S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, fancy type, superior quality, fixed with screws complete all as specified and directed.
S&F in repair urinal spreader CP fixed with 15 mm bore GI tubing & connection complete all as specified & directed.
S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified.
S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.
S&F in repair flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed.
S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc.
S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brackets and fixing brackets complete all as specified and specified.
S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union or waste fitting to pipe overall size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack of 900 X 1200 mm size (Min weight 4.50 Kg) complete all as specified.
S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.
Dismantling mild steel work of any description in any position complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.
S&F 6mm thick asbestos cement one-piece plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
Dismantling of old CGI sheet (corrugated, semi corrugated etc) from roof coverings including ridges of any type & any description as directed by Engr-in-charge.
S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts with grade of zinc coating 275 etccomplete all as specified and directed.
M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed..
M & L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for steel work in square or rectangular hollow section used as in purlins, rafter, column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. using induction butt welded tubes conforming to IS-4923-1997 grade Yst-310 complete all as specified and directed.
M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/ Cement mortar 1:3 complete as in repair all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make of size 25 x 25 mm x 0.5mm(b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners with rawl plug and screws plugging in RCC slab placed @ 605mm centre to centre from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level complete & confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE. NOTE: The complete ceiling work shall be done as per manufactures instructions.
S & F in repair 4mm thick E-boards of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS fixed in squares of GI / aluminium powder coated grid with hold down clips made to shape, shade and pattern of tiles shall be as approved by GE. NOTE: The complete ceiling work shall be done as per manufactures instructions.
S & F in repair 16mm thick ceiling board (acoustical tegular ) of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS fixed in squares of GI / aluminium powder coated grid with hold down clips made to shape, shade and pattern of tiles shall be as approved by GE. NOTE: The complete ceiling work shall be done as per manufactures instructions.
Dismantling of old existing aluminium Doors /windows/wall partitions of any type and in any size complete all as specified and directed.
S&F fabricating anodized aluminium frame work, door shutter ,windows , partitions with one or more rebates sections of approved tint as required for partitions including beading, cleat, screws, fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
S&F powder coated aluminium anodised grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed .
S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified.
S&F in repair 75 mm size 4 levers aluminium mortice lock, vertical type complete all as specified.
S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
S&F in repair 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.
S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M&L for wall cladding tiles sizes 300 mm x 600 mm x 7-8 mm thick designer type coloured for wall etc set & jointed in cement and pointed in coloured cement to match the shade of tile and over 15 mm thick rendering in CM 1:4 on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.
S&F in repair aluminium composite panel sheet 3 mm thick PVDF fixed with necessary frame work of aluminium tube with required silicon & screw as in ceiling /columns and in vertical surface complete all as specified and directed.
S&F in repair Stainless steel letters 450 mm height and 32 mm depth made of 1 mm thick stainless sheet with seamless welding rubbed polished and edges made smooth with necessary fixing devices complete all as specified and directed .
S&F 12 mm thick toughened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring with two Nos decorative type aluminium handle of 200 mm dia , complete all as specified and directed.
S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.
M&L for preparation of old decorated surface of walls by scrapping tools/electric hand grinder and applying one coat of white wash on wall with paint sprayer machine complete all specified.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibre (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
M&L for preparation of old decorated surface of ceiling by scrapping tools/electric hand grinder and applying one coat of white wash on ceiling with paint sprayer machine complete all specified and as directed.
M&L for preparation of old plaster surface of wall by scrapping tools/electric hand grinder and applying one coat of cement base paint with paint sprayer machine complete all as specified and directed.
Complete removal of existing treatment on wall of old plaster surface by scrapping tools/electric hand grinder and apply two coats of cement base paint with paint sprayer machine over a coat of cement primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall by scrapping tools/electric hand grinder and applying one coat of oil bound distemper white or tinted with paint sprayer machine complete all as specified and directed.
Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying 1mm thick wall care putty, after dry the layer of putty, apply two coats of oil bound distemper white or tinted with paint sprayer machine over a coat of primer complete all as specified and directed.
Complete removal of existing treatment on wall of old decorated surface by scrapping tools/electric hand grinder and applying one coat of internal plastic emulsion paint white or tinted on wall with paint sprayer machine over a coat of 2 mm thick wall care birla putty complete all as specified and directed.
M&L for removal of existing treatment from wall by mechanical means & applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having level of volatile organic compounds less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of oil bound distemper with paint sprayer machine over a coat or two coat of wall care 1mm thick putty complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer with paint sprayer machine over a coat of wall care 2 mm thick putty complete all as specified and directed.
M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash with paint sprayer machine complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of white wash with paint sprayer machine complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coats of internal plastic emulsion paint white or tinted on wall with paint sprayer machine over a coat of 2 mm putty of complete all as specified and directed.
M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayer machine complete all as specified and directed.
Schedule of Credit (MINUS) Rs. 78420.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
Channa Brothers and Co. (BID ID -3069067)
M/S SANJAY CONSTRUCTIONS (BID ID -3067525)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .