Earthwork for Excavation of Trenches for Laying UGPS of RCC Pipes

Proof of Enlistment in Class I/A, II/B, III/C or IV/D with Department of Soil and Water Conservation, Punjab or Department of Water Resources, Punjab or in any other Govt Department in State/Country in appropriate Class with amounting to similar or more than DSWC enlistment limit.

Bank Solvency of 40% of amount of tendered work from scheduled bank. Minimum 20 % of the solvency amount should be available in the form of capital or liquid assets or availability of credit facilities.

List of Essential Machinery on ownership/lease basis

List of Essential Technical Staff

Requisite Bid Capacity

Email id of Bidder

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Lowering & Laying of 400mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 400mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 400 mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (400 mm) as per PWD specifications.

End Closure(1:5 ) including material like Cement, Sand, Bricks etc.

Earth work in Excavtion as per PWD specifications.

B.B.C 1:8:16 as per PWD specifications.

Reinforced Cement Concrete 1:2:4 as per PWD specifications

First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.

10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.

Plain Cement Concrete 1:2:4 as per PWD specifications

Provding and Fixing of steps for Houdi

Sign board

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Lowering & Laying of 400mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 400mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 400 mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (400 mm) as per PWD specifications.

Earth work in Excavtion as per PWD specifications.

B.B.C 1:8:16 as per PWD specifications.

Reinforced Cement Concrete 1:2:4 as per PWD specifications

First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.

10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.

Plain Cement Concrete 1:2:4 as per PWD specifications

Provding and Fixing of steps for Houdi

Sign board

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Lowering & Laying of 450mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 450mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 450 mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (450 mm) as per PWD specifications.

End Closure(1:5 ) including material like Cement, Sand, Bricks etc.

Earth work in Excavtion as per PWD specifications.

B.B.C 1:8:16 as per PWD specifications.

Reinforced Cement Concrete 1:2:4 as per PWD specifications

First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.

10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.

Plain Cement Concrete 1:2:4 as per PWD specifications

Provding and Fixing of steps for Houdi

Sign board

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Lowering & Laying of 300mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 300mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 300 mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 600mm RCC Pipes for Pump stand as per specifications including material like Cement, Sand, Bajri etc.

Sign Board

End Closure(1:5 ) including material like Cement, Sand, Bricks etc.

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Dismentling of Open Channel

Lowering & Laying of 400mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 400mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 400mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Fixing of Gate Valves of 400mm diameter as per specification including material like Cement, Sand, Bajri etc.

Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (400 mm) as per PWD specifications.

Re-Carriage of 400 m.m Pipes (0.5-1 km)

Fixing of Sign Board (4ft*3ft)

Earth work in Excavtion as per PWD specifications.

B.B.C 1:8:16 as per PWD specifications.

Plain Cement Concrete 1:2:4 in flooring as per PWD specifications.

Reinforced Cement Concrete 1:2:4 as per PWD specifications

First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth as per PWD specifications.

10 mm thick cement plaster work 1:3 as per PWD specifications.

Supply and Fixing of Silting Tank Steps

Item of Work

Words

Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.

Lowering & Laying of 450mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.

Jointing of 450mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.

Fixing of 450mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.

Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.

Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (450mm) as per PWD specifications.

L-T Joints

End Closer

Fixing of 450 mm Gate Valve

Re Carriage of 450mm class NP-2 R.C.C pipes

Sign Board

Earth work in Excavtion as per PWD specifications.

B.B.C 1:4:8 as per PWD specifications.

Plain Cement Concrete 1:2:4 in flooring as per PWD specifications.

Reinforced Cement Concrete 1:2:4 as per PWD specifications

First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.

10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.

Fixing of steps including steps