Drilling of Bore well in Rudrakshi math at ward no 68

Drilling of Bore well in Rudrakshi math at ward no 68

Geophysical investigation at site for sinking borewells for Providing

drinking water to the habitation either through the Hand Pump MWS

or P.W.S.S, by vertical electrical sounding by adopting Venner...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars an...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars an...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars an...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars an...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes,...

Providing and laying at site of work MS casing caps as per IS 1239 (part

II) 1982 with all latest amendments if any for any dia. The thickness

of plate used for covering one end shall be 3mm (minimum...

Providing Submersible Pump Set of 150mm dia suitable for bore well and

confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt

Motor as per specifications, to work site as per necessary ...

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments.1x3x4 ...

Supply and delivery at site of brand new best make gate valve as per IS

778/1984 with ISI Mark and as per its latest amendments.Size 50 mm

Supply and delivery at site of brand new best make gate valve as per IS

778/1984 with ISI Mark and as per its latest amendments Size 65 mm

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

Supply and delivery at site best indigenous brand new power capacitor as

per IS 2834/1986 with latest amendments with KPTCL authorities and

erection, electrification and commissioning of the same at...

Supply and delivery at site delivery of best indigenous brand new MCB

(Miniature Circuit Breakers) of required capacity as per IS 88228/1978

and its latest amendments and with ISI Mark of 6/10/16/20...

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC

Column pipes with heavy duty collars,rubber profile ring,vibration

control profile ring,freezing and turbulence free leak proo...

Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set

complete suitable for uPVC Column pipes for Submersible pumpsets

Labour charges for Erection, Electrification and commissioning of Pump

sets, including aligning and balancing of all items including supply and

erection of two pair of supporting clamps, bore well c...

Labour charges for erection of outdoor type panel board and meter board

units with all necessary materials and labour, tools and equipments

including providing cement concrete foundation bed etc., c...

Providing main connection from pole PVC insulated sheathed steel wire

cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI

mark from KPTCL pole to meter board unit

Earthing: Providing and fixing and wiring earth electrode for grounding

circuits IC cutouts and other equipments on the meter board in the pit.

The pits should be filled up with equal proportion of ...

Supply and delivery at site wrought middle steel (galvanized) GI elbow

confirming to IS 1239-II, 1991 with latest amendments if any for:For 50 mm dia GI elbow

Providing wrought mild steel (galvanized) GI collar confirming to IS

1239-II, 1991 with latest amendments if any.For 50 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI union

confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI Union