Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.7 L+₹2.6 L (5.93%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹47.0 L+₹2.9 L (6.52%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹48.1 L+₹4.0 L (8.97%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹48.3 L+₹4.1 L (9.40%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
27 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN 913869 C/O 99 APO
SPL REPAIR TO BLDG NO P-179 AND CERTAIN REVENUE AND MINOR WORKS AT LEIMAKHONG MIL STN
2023_MES_581955_1
8468/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹87,000
Yes
3 Jul 2023
20 Feb 2023
28 Mar 2023
20 Feb 2023
27 Mar 2023
13 Mar 2023
Amount
Schedule 'A'
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for 12 mm thick block boards, grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work complete all as specified and directed.
S&F 30m wide continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.
S&F 40mm dia cupboard /knobs fixed with nuts, screw and washer of mild steel bright finish complete all as specified and directed.
S&F Magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified.
S & F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Labour only for Chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc., exc 3mm but n. exc 75mm girth on softwood complete all as specified.
Dismantling of plain or carrugated steel sheeting, any guage, thickness incl, nanital or similar pattern roof covering complete all as specified.
S&F Pre-Painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering for ridge fixed with self tapping screws ccomplete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (Min thickness of powder coating 50mm micron) complete all as specified and directed.
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc (Min thickness of powder coating 50mm micron) complete all as specified and directed.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed.
S&F 4mm figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 sqm diluted with water in 101 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimun 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note :- (a) The work pertaining to periodical services & water proofing shall be excuted from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer.(b) Cost of scaffolding upto 10mtr height of building is included in this item.(c) The contractor shall upload along with documents under cover-I. 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.(d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. (Make :- ASIAN, BERGER and DULEX)
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note-(a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chalja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .l.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(c) Cost of scafolding upto 10m hight of building is included in this Item.
M&L for Preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.
Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm each complete all as specified and directed.
Taking down chowkats of frames with shutters (without taking off shutters from the frames) n exc 1.5.Sqm each complete all as specified and directed.
S&F 35 mm thick flush shutters solid core construction but with particle board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F 2nd class HW 35mm thick glazed and skelton shsutters open rabated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rouunded fitted with cut and beads for sccuring glass, gauge etc size of shutters as specified in SSR Part-I section & clause 8.20(a) complete all as specified and directed.
M&L for 2nd class HW plain, solid, straight chowkats & frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints complete all as specified and directed.
S&F butt hinges, 125mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed type B-21complete all as specified and directed.
S&F for 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F for Extruded aluminium alloy handles 125 mm, fabricated type anodised complete all as specified and directed.
S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 2nd class hard wood small fittings such as brackets of any type ,latch and hing block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as in repairs complete all as specified and directed.
S&F repairs 300mm ordinary rat tail rod pattern springs including roller plate complete (mild steel body) complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M & L for Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping, manhols,drain complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A complete all as specified and directed.
S&F framed work such as grills, gratings, angle Iron etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; wal ways riailing etc of water tank s and similar work conforming to Fe 2990 Gde - E- 165 complete all as specified and directed.
Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick walls including racking out joints haking for keys scrubbing down with water etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operatinh single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on surface complete all as specified and directed. Note :- (a) Sanding of surface to be done by mechinical sander with 1500-2700 rpm, with internal dust extraction system for cleaning environment certified by paint manufacturer. Proper mixing to be carried out before primer and paint application. (b) The work pertaining to periodical services & water proofing shall be excuted as per manufacturer instructions of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (c) Cost of scaffolding as per requirement of building height is included in this item.
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. Note: (i) Plastering shall be carried out using Dimapur Sand. Note: (ii) WPC will be measured and paid separately
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors complete all as specified and directed.
M&L Cement concrete type C-2, 1:3:6, 75mm thick (20mm graded aggregate) in plinth protection, similar work of PCC and finishing cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L for 25 mm thick Cement concrete type B1,1:2:4 (20mm graded aggregate) as in using sub-base complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and floor complete all as specified and directed
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.
Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
M & L for 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 150mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.
S&F tubes 15mm bore, medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F tubes 20mm bore, medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated bib taps fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F bore bib taps(ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed.
S & F 15 mm bore chromium plated bib taps fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S & F in repairs 15 mm pillar taps fancy type long s cast copper alloy with capstan heads chromium platedscrewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
S&F for banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.
M&L for prepraration of new or untreated surfaces of steel/iron of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply only integral water proofing compound complete all as speicified and as directed .
M&L for (nominal mix) RCC type B1 (1:2:4) 20mm graded agreegate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles etc, complete all as specified and directed.
M&L for Pre-cast RCC 1:2:4 type B1 (using 20mm graded broken stone agg) as in cover slab of manholes cover slab etc and set in CM 1:4 complete all as specified and directed.
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 6 to 8mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
All as per item here in before as above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders all complete as specified and as directed .
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed.
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed in steel shutter or wooden shutter, tinned stacks, or galvanized wire staples complete all as specified and directed.
S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in steel shutter or wooden shutter, tinned stacks, or galvanized wire staples complete all as specified and directed .
S&F 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.
S&F in repair 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F in repair rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F for towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed layer as backing in CM 1:4 complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering as backing in CM 1:3 complete all as specified and directed.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc to brick wall and making good, cutting not exc 10cm girth complete all as specified and directed.
S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick, screed bed in CM (1:4) complete all as specified.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified
S & F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling anmd waste pipe upto floor trap complete all as specified and directed.
M & L for RCC nominal mix Type B1 1:2:4 using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) rough finished of flat concrete surface complete all as specified and directed.
S & F 0.80 plain glavanised mild steel sheeting , on wall cladding and ridges , valley gutters , drips and straight flashing complete all as specified and direted.
M &L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S&F Rolled section as in main and cross beams, hips and Jack rafters, purlins where connected to common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plates confirming to Fe-410-W Gde E-250 quality A complete all as specified and directed.
S & F steel work in tubular trusses/post including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 (Gde E-250, quality-A) complete all as specified and directed.
M & L for preparation of new or previously untreated surfaces of steel and applying one coat of red oxide for steel section above false ceiling complete all as spercified and directed.
M & L for old painted surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complet all as specified and directed,
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including over fillets complete all as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm and fixed with 30mm laps complete all as specified and directed.
M&L 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.
M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.
M & L 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as pecified and directed.
M & L 40 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as pecified and directed.
S&F 2nd class HW 30 mm thick glazed and skelton shutters open rabated and prepared to recieve glass, guaze etc but devided in to squares with plain chamfered or rounded mitred and rebated sash bar any number of edges of framing plain chamfered or rounded fitted with cut and mittered beads for securing glass guage etc . size of memebrs as specified in SSR Part-I section & clause 8.24(a) complete all as specified and directed.
S & F Galvanised steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.
Dismantling timber scantling unfrmaed work 40 sq cm and over in section in any position complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC steel sheet re inforced with MS square tube in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 SSR Part II complete all as specified and directed.
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed.
M&L for PCC 1:3:6 Type C-1 (Nominal mix) using 20mm graded stone agg as in hold fast etc. complete all as specified & directed.
S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140 mm overall lenth of cover plate.complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S & F 100 mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed section barrel tower bolts complete all as specified and directed.
S & F 150 mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed section barrel tower bolts complete all as specified and directed.
S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S & F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and directed.
M&L for thickness 1 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander ( having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc as per following steps:- Step 1 )- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute. Step 2)-Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 lts per minute with a maximum pressure 3300 PSI . Step 3)- Allow 6-8 hrs time to dry the putty surface Note :- (a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials ie paint , distemper, putty etc. is proposed to be used by the contractor and approved by Garrison Engineer (b) Cost of scaffolding upto 10m height of building is included in this item (c) The contractor shall upload alongwith the documents under cover -1 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract , failing which the bid shall be liable to be reject. (d) Masking of window /doors during spray painting using polythine film will be included . (e) Cleaning and clearing site of paint , mats etc included. (f) 05 yrs guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 yrs
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile and including 10 mm thick plasster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:4) complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in sofe/loose soil complete all as specified and directed.
Add item No 136 above for each additional 1.5 m of part thereof in depth beyond the first 1.5 m upto 3.0 m depth complet all as specified and directed.
M&L for Cement concrete, (1:4:8) type D2 (using 40mm graded aggregate)as in foundations and sub base complete all as specified and directed.
M & L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded aggregate ) as in sub base complete all as specified and directed
M&L 25mm thick plain cement concrete 1:2:4 Type B-1 (Nominal mix) using 20mm graded crushed stone aggregateas in floor, finishes even and fair to receive floor tiles complete all as specified and directed.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
S & F Vitreous China Squatting pan of pattern "long pan" size 580 mm white with P and S trap , front or back inlet and fpoot rests , any pattern (excluding flushing cistern and flush type ) complete all as specified and directed.
S&F PVC low level flushing cistern white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S & F wash basin, vitreous china (flat back or angle back type), white, 550 x 440 mm size, white, including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.
S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.
S & F China vitreous China soap tray embedded in the wall all as specified and directed.
S & F 125mm dia brass chromium plated shower rose with or without swievel joints any size including fixing to steel pipe of union complete all as specified and directed.
M & L PVC (SWR) Floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) diameter of outlet 75 mm complete all as specified and directed.
S & F 110 mm PVC (SWR) reducer complete all as specified and directed.
S&F 75 mm dia PVC SWR vent cowl complete all as specified and directed.
S&F pillar taps, ISI marked cast copper alloy chromium plated, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 100mm complete all as specified and directed.
Excavation over areas exc1.5m and n.exc 1.5m deep and getting out in soft/loose soil for foundation complete all as specified.
ditto as per item no. 162.00 but for each additional 1.5m or part thereof in depth beyond the first 1.5m upto 3.0 m depth complete all as specified.
M&L for Cement concrete, (1:2:4) type B2 (using 40mm graded aggregate)as in foundations, filling and mass concrete complete all as specified and directed.
M & L for providing precast cement concrete using 20 mm graded aggregate in cover slabs using type B1 1:2:4 & setting in cement mortar 1:6 complete all as specified and directed.
M & L for brickwork with subclass 'B' brick with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septic tank/ soakwell etc. in sewer works built in cement mortar (1:3) complete all as specified and directed.
Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.
M & L for loose filling with broken bricks of gauge 80 to 150 mm in soakage pits and soakage well complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 100mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Grade E-165) quality-A complete all as specified and as directed.
M & L for rendering 10mm thick plaster in cement mortar (1:6) on oyher than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)
M&L for preparation of newly plastered surface of wall, making the surface smooth by applying 3mm thick wall care putty complete all as specified and directed.
M&L for preparation of new decorated surfaces of walls and applying two coats of cement base paint and one coat of cement primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over one coat of cement primer complete all as specified and directed.
Forming contraction (dummy) joints 65 mm x 10 mm wide and filled with sealing compound of grade 'A' complete all as specified and directed.
S & F vitreous china European type/pedestal type water closet "P " and "S" trap including PVC plastric "P" and "S" trap including PVC plastic sheet cover (commander) complete all as specified and completed.
M & L for PCC 1:3:6 type C2 using 40 mm gragded aggregate as in walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bses) complete all as specified and directed,
S&F stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
S&F stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends fixed in repairs complet all as specified and directed
M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)
Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed.
Dismantling structural steel window steel work including doors, gates but excluding framed truss etc complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
M & L for 3.0 mm thick plain tinted sheet glass ordinary quality in squares exc 0.5 m sqm each pane for aluminium window complete all as specified and directed.
S&F 20mm thick Granite (of any type) tiles, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. including 20mm thick screed bed or bedding layer in CM(1:3) complete all as specified and directed.
M & L 50 mm thick PCC 1:2:4 Type B2 (nominal mix) using 40mm graded stone aggegate in floor finish even & rough to receive floor tiles. complete all as specified and directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
M & L for warer proof cement cement based putty @ 1 kg (undiluted) per sq mtr of average thickness 1 mm over the plastered /old painted wall after scrapping to prapare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500 , sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour, complete all as specified and directed.
Dismantling water tanks capacity exc. 250 litres and n.exc. 500 liters and removing to store complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F in repair of brass chromium plated shower rose 125 mm size with or without swivel joints , any size, including fixing of steel pipe of union any colour for fixing with 15 mm pipe complete all as specified and directed.
S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover, mild steel chromium plated hinging device complete all as specified and directed.
Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement and using WPC @ 2% by weight of cement or as per manufacture's instrs complete all as specified and directed. Note: (i) Plastering shall be carried out using Dimapur Sand. Note: (ii) WPC will be measured and paid separately
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and completed.
M & L for two coat aluminium paint over APP based polymeric membrane or surfaces of any descrption over 10 cm in width or girth not otherwise described complete all as specified and directed.
S & F in repair viterous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch.
One socket outlet 5 Amps 5 pin on independent board.
One socket outlet 5 Amps 5 pin on same board.
All as per item No. 202.00 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module.
S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body.
Supply and fixing modular switch piano, 16 Amps, single pole, one way, one module.
S&F modular white cover with frame for fixing of 12 module.
S&F modular white cover with frame for fixing of 8 module.
S&F modular white cover with frame for fixing of 6 module.
S&F modular white cover with frame for fixing of 4 module.
S&F modular white cover with frame for fixing of 3 module.
S&F modular white cover with frame for fixing of 2 module.
S&F blank speacer plate for single module.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole and neutral 40 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S & F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Taking down old unserviceable service cable including batten/suspending wires complete all as directed.
S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.
Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as directed.
Refixing ceiling/exhaust fan removed under item Srl No 229.00 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Hanging only ceiling fan (M D Supply) /and connecting up ceiling rose or connecting to fan complete all as specified and directed.
Fixing only exhaust fan (M.D Supply) /and connecting up ceiling rose or connecting to fan and making a whole cutting on the wall for fixing exhaust fan complete all as specified and directed.
S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.
Supply and fixing building security light fitting new generation energy saving & environmental friendly long life versatile pressure dia cast aluminium IP-66 high power LED light 30 watt complete with fixing arrangement inlcuding bracket etc complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed
Drilling and tapping cast iron / ductlile iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified and directed .
Taking down old unserviceable light fitting of any type and in any situation complete all as directed.
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including lamp complete all as specified and directed.
MAURYA CONSTRUCTIONS
M/S BIJOYA LAXMI ENTERPRISE
M/s Ritz Marketing
SUBHASH CHAND GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .