Construction of RCC Box Culvert 4x4 M 3-Cell At Ishan Nadi on Ratibhanpur Bhaikuri Road , Bhaikuri Marhara Road Km. 9

Construction of Embankment with Material obtained from Borrowpits (Lead 2Km.) :-Construction of embankment with approved material obtained from borrow pits with all lifts and leads with 1 Km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (Excluding Cost of GST)

Supply and Laying Hume Pipe 1000 mm Dia including all material, labour T&P etc complete as per requirement of site and as per direction of E/I (Excluding Cost of GST)

Brick soling with straight overburnt bricks laid on edge including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labours, T&P etc. required for proper completion of work. (Excluding Cost of GST)

Supply and Filling of Gunny begss with local earth including placing as per requirement of site and as direction of E/I (Excluding Cost of GST)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (Excluding Cost of GST)

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately (Excluding Cost of GST)

Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works. As per Morth Specification. Sr 2.04 (Excluding Cost of GST)

Dismantling of B.O.E soling/Inter locking tiles Including Stacking of serviceable material and disposal of unserviceable materials within a lead of 50m as per direction of EI/C (Labour only) (Excluding Cost of GST)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Excluding Cost of GST)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. As per Morth Specification No.-15.01, 304(B) (Excluding Cost of GST)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.PCC Grade M15 PCC Grade M15 using batching plant & Concrete pump. (Excluding Cost of GST)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M20 using batching plant transit mixer & Concrete pump (Excluding Cost of GST)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700 & 2100 Sr 12.08 (R.C.C. Grade M-30) (Excluding Cost of GST)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications 1500, 1700 & 2200 sr no. 13.05. (RCC Grade M-30) (Excluding Cost of GST)

R.C.C. M-30 :- Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 (Excluding Cost of GST)

Providing and laying cement concrete wearing coat M-30 grade excluding reinforcement complete as per drawing and technical specification clause 800 and 1206.3 (Excluding Cost of GST)

Supplying, fitting and placing HYSD (Fe-500) bar reinforcement in foundation complete as per drawings and technical specification clauses 1000 and 1202. (Excluding Cost of GST)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing foce. Complete as per drawing and Technical Specifications (Excluding Cost of GST)

Drainage Spouts complete as per drawing and Technical specification. As per MORT&H Specification No. 14.9 (Excluding Cost of GST)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (Excluding Cost of GST)

Providing, laying, spreading and compacting stone aggregates of Grading-I 63 mm to 45 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 1 as per Technical Clause 404 (Excluding Cost of GST)

Providing, laying, spreading and compacting stone aggregates of Grading-II 53 mm to 22.4 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading II as per Technical Clause 404 (Excluding Cost of GST)

Providing and applying primer coat with SS grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORD specification No. 502 MORTH (Including cost of Bitumen/Emulsion But Excluding Cost of GST)

Providing and applying Tack coat with bitumen VG-10 on prepared bituminous surface including cleaning of road surface and spraying tack coat at the rate of 0.25 kg sqm using mechincal means. (MoRT&H Specification No. 503) (Including cost of Bitumen/Emulsion But Excluding Cost of GST)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm & 11.2mm (Proportion 2:1) aggregates using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, incluing mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. (Including cost of Bitumen/Emulsion But Excluding Cost of GST)

Providing, laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-B as per Technical Specification Clause 511. (Including cost of Bitumen/Emulsion But Excluding Cost of GST)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. (Excluding Cost of GST)

Back Filling behind abutment, wing Wall & Return wall Complet as per Drawing and Technical Specification. (Excluding Cost of GST)

Providing and laying filter media undermeath pitching in slopes completer as drawing and technical specification cl. 1302 (Excluding Cost of GST)

Please Enable Macros to View BoQ information