Balance Work/ Renovation to the academic block at IMPA Srinagar

Amount

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Preparation of surface by way of sand papering, applying acrylic putty incl. wood work all complete job

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish

P/F of 5 mm thick glass panes in door / windows shutters incl. all necessary beadings and nails complete job

P/F of hooks for windows shutters complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Re alignment/ re-fixing of stainless stair railing in proper position by ways of using dash fasteners screws, nuts etc complete job

Providing and fixing tiled False Ceiling of specified materials(gypsum) of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) as per the directions of site I/C (tile work only) Excl. frame work but incl realignment of already fixed metal grid frame work (where ever required)

NOTE:- Quality of execution of work:- Quality of items/makes/brands & workmanship shall be adhered to and executed under control of the Engineer I/C of the site /work

M/S MOHD ISMAIL BHAT