SPECIAL REPAIR TO BUILDING NO. T-45 AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section incl trusses in any position as in unframed work, complete all as specified and directed.

M& L for second class hard wood in scantlings clean sawn Timber framed and fixed

M& L for second class hard wood in scantlings clean sawn Timber framed and fixed but except timber.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F mild steel (Fe 410 w gde 250A quality) rolled sections as in purlins where connected to common rafter and running rails and guides for roodf fixed with angle cleats etc as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically and removed debris outside MD land.

Demolition of Concrete concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removed debris outside MD land.

M&L for 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified

M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.

M&L for glass dividing strips, 3 mm thick and 38mm wide complete all as specified and as directed.

M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

S&F non skid ceramic white tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed 0.06 sqm but not exc.0.11sqm , cooured tiles in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises outside MD land.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/Skirting

Glazed ceramic Coloured tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.

S&F Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

.- ditto- but in skirting/ dado

M&L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4

Mild steel TMT 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M&L for formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

M&L Pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed

M&L Pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed

M&L for PCC 1:2:4 type B0 (using 20mm graded stone aggregate) as in coping, filling in pressed steel door frames and similar works complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered

M&L for 2nd class hardwood 35mm thick factory made, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Hacking out old broken glass (any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and removal of broken glass outside MD land.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty oin squares not exceeding 0.5 Sqm in each pane

S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity (cylindrical vertical with closed top) three layer hoissted and fixed in position all as specified including dimantling old unserviceable water tanks.

S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water in stone concret block or slab.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down old unserviceable pipes.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down old unserviceable pipes..

S&F in repairs 15mm Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs Brass chromium plated shower rose 125mm size with swivel joints fixing to steel pipes etc all as specified and directed.

S & F 15mm bore stop valves/angle cock, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm.

S&F in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

S&F in repairs 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

S&F in repairs vitreous china wash basins, white, flat back, size 550X400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S & F health faucet with flexible pipe and hand shover ,the length of hose 1mt fitted to the tap. Make : JAGUOR Code ALD CHR 565

S&F CP 2 way bib cock Make : JAGUOR cat No 38041 or equivalent in Hindware/Cera.

S&F in repairs stainless Steel sink with drainage board made of 304 grade stainless steel 1 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain pipes/PVC, internal dia of pipe 100mm jointed in cement mortar and taking out of trenches, if required

S & F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to floors.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) Vent Cowl.

S & F in repair PVC (SWR) Floor trap including grating,set and jointing with solvent cement 75 mm dia and concrete filling etc.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S& F in repair Stack clamps of 110 mm out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling including Gypsum Board 12 mm thick in ceiling fixed with screws including hangers 6 mm dia. G.I.wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of OBD on visible surfaces and one coat of white wash on other surface as per manufacturer instructions complete all as specified

M&L 75mm thick cement concrete type C2 by using 20mm graded aggregate 1:3:6 aid in pannels including finished surface smooth and even w/o using extra cement for plinth protection.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.and removed debris outside MD land.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, modular bricks in cement mortar 1:4.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement.

M&L for preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistent priming paint complete all as specified and as directed.

M&L for preparing old plastered/unplastered surfaces of wall and applying one coats of distemper oil emulsion complete all as specified and as directed.

M & L for complete removal of existing treatment on old surfaces and applying two coat of cement based paint complete all as specified and as directed.

M & L for preparing new plastered surfaces of wall and applying two coat of cement based paint complete all as specified and as directed.

M&L for preparing old surfaces of walls by brooming down and applying two coat of white wash complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coats of white wash complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frmes).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed by the Engineer-in-charge.

Taking down carefully MCB DB SPN/TPN, Metal P&S alongwith MCBs complete and taking credit all as specified and as directed by the Engineer-in-charge.

Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including double locking type PVC casing and caping and its accessories of suitable size and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, including fabricated steel teminal box made out of GI sheet concealed in walls duly painted with red oxide primer covered wiht thick connected sheet of suitable module for fixing switches /sockets/ regulators etc.all specified for :-

(a) One light point controlled by one way switch .

(b) One ceiling fan/ exhaut fan point controlled by one way switch.

(c) One 3 pin socket outlet 5 Amps on the same board with other switches.

(d) One 3 pin socket outlet 5 Amps on the Independent board.

(e) One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

(f) All as per item No- 4 here-in-before but with 4 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

S&F Switch Piano, flush type single pole, one way 5 Amps.

S&F Switch socket combination, 2 in 1, 3 Pin, flush type 5 Amps.

S&F switch socket combination, 2 in 1, 5 Pin, flush type 5&15 Amps.

S&F stepped type electronic fan regulator flush type

S&F Bell push

M&L for Sub main wiring complete with Two runs of 6 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 6 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size PVC CONDUIT (surface) and accessories complete all as specified and as directed inlcuding taking down old unserviceable Sub main wiring. Note: Three runs of 6 Sq mm + PVC conduit with accessories will be measured as a one unit.

All as per item above but with Three runs of 4 Sqmm

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F Lamp Holder (Angle type) all as specified and as directed.

S&F bell, Ding Dong AC, 230 volts all as specified and as directed

S&F ceiling rose 3 terminal PVC/Polycarbonate insulated body.

S&F Metal clad plug & socket 2 pole and earth complete with enclosure, plug, socket, MCB 16/20A 'C' curve concealed in wall and make good all as specified and as directed

Taking down existing ceiling fan from it's position and re-fixing all as specified and as directed.

Supply & Fix transperant enclosure for meter suitable for single phase energy meter all as specified and as directed. Note:- The rate quoted shall be included for removing the existing energy meter and refixing the same in the enclosure provided under the item.

S&F PVC connection of any description and supply and fix new PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides suitable for cold/ hot water complete all as specified and as directed by the Engineer-in-charge.

M&L for cutting existing GI pipe 20mm dia in situ and making branch connection using GI Tee 20x20x20mm

S&F GI pipe medium grade of 20mm dia including GI tee, bends, sockets, unions etc complete all as specified and as directed by the Engineer-in-charge.

S&F Stop valves 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated

S&F New chromium plated bib tap of size 15 mm dia bore complete all as specified and as directed.

Supply & fix vertical mounted MCCB (Moulded Case Circuit Breaker) DB TPN 4 way of IP 43 protection double door with insulated bus bar assembly, neutral bar all as specified and directed. (Note: Incomer MCCB & outgoing MCBs will be measured and paid seperately). Make : Legrand / Indo Asian/ABB/Havells/L&T

Supply & fix MCB DB SPN 8 way double door with neutral bar etc all as specified and directed. (Note: Incomer & outgoing MCBs will be measured and paid seperately)

Supply & fix MCCB (Moulded Case Circuit Breaker) upto 63 Amps, 16KA, 3 pole, 415V suitable for vertical mounted TPN DB all as specified and directed.

Supply & fix MCB DP upto 40 Amps, 10KA, C Curve, 240V all as specified and directed.

Supply & fix MCB SP 6-32 Amps, 10KA, C Curve, 240V all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40 mm dia med. gr. GI pipe for protection of galvanized iron strip in the ground, further connecting with GI wire 4mm dia to Distribution board, including excavation, earth work, Charcoal, Salt, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I including taking down old U/S earthing. NOTE: a) GI Pipe for protection of earthing wire and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm or nearest size.

Supply and fix louvers/shutters made of galvanised sheet to open and close opening/hole made for exhaust fan of size 250mm dia automatically

M&L for making hole in brick masonary wall suitable for exhaust fan of size upto 250mm and making good all as specified and as directed by Engr-in-Charge

Supply and fix electric water heater, storage type suitable for AC single ph 230 V 50HZ supply with heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

M&L for provision of GI pipe medium grade 40mm dia of length 3 meter and grouting both ends of pipe into brick wall rigidly using PCC suitable for mounting of ceiling fan and including suitable hook, nuts bolts, making good etc.

M&L for GI wire 4 mm dia as earth continuity wire

NEWS CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

M/s D.Krishna Varma

SAI RUPA CONSTRUCTIONS

MCS ENGINEERING CONSTRUCTIONS