"Electrical(G) works in connection with (i) LLH-Strengthening of Crane Girder of L- SHOP Bay III & Bay IV with 25T Crane Gantry Capacity in Liluah Workshop Eastern Railway, (ii) Liluah Yard Augmentation for increasing wagon holding capacity,(iii) LLH-Re- modelling & Re-Construction of Electrical Power car, AC overhauling & finish Shop of Eastern Railway"

1-Electrical/Genl Works

2-HT/LT Panels and DBs

3-LED Luminaires

Item Breakup - 1-Electrical/Genl Works

Supply of Schematic Diagram in original Set along with 06 copies on A-0 papers of different locations showing super imposition of cable route, HT/ LT panels, transformers, location of tubular poles and all other electrical items and works.

HT/ LT cable trenching in underground by Metre digging earth, protection of the cable with sand and brick and filling with earth as per CEE/E.Rly's Drg. No.: E4 GPST/033/87

Supply and laying of 50 mm dia ISI marked Metre heavy duty rigid PVC pipe in wall/ underground by cutting trench/ in wall

Supply and laying of 50 mm dia medium Metre duty GI pipe confirming to IS:1239 (Part-I) underground by cutting trench.

Supply and laying by boring method, under Metre the Railway track HDPE pipe 75mm PN-60 (6.0 kgf/sq.cm.) thickness as per IS: 4984:1995.

Supply for boring method, under the Metre Railway track HDPE pipe 100 mm PN-60 (6.0 kgf/sq.cm.) thickness as per IS: 4984:1995.

Supply of cable tray of width 450/ 250/ MT 200/ 150 mm. made of GI channel and fixing on wall with suitable arrangement made of GI flat/ angle/ channel with GI nut & bolt.

Laying of cable through trench, GI & HDPE Metre pipe, PVC pipe, (FRP) cable tray, cable duct and on wall surface with necessary clamping arrangements etc.

Drawing of cable through structure, shed Metre etc. with suitable clamping arrangement.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (16-35) sq.mm.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (50-95) sq.mm. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (120- 185) sq.mm.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (240- 400) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (16- 35) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (50- 95) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (120-185) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (240-400) sq.mm.

Supply and installation of GI flat of 50 mm Kg x 6 mm or GI Wire (6SWG) for earthing arrangement of transformer, HT & LT panel and connection with earth pipe (GI Flat/ Wire to be decided by the EIC).

Supply, digging, insertion, testing and Numbers commissioning of earth pipe made of heavy duty GI pipe of size 50 mm. dia., 3 mtr. long including construction of earth pit and each pit should be provided with 3 nos. of above pipe duly shorted by suitable length of G.I flat (37.5 mm x 8 mm) including necessary earth connection from earth pipe to the distribution panel with GI flat.

Supply, installation & connection of 4-pole Numbers copper busbar, 200 Amp capacity, 6 way Copper Busbar Chamber in a suitable MS box.

Supply, installation & connection of 4-pole Numbers copper busbar, 400 Amp capacity, 6 Way Copper Busbar Chamber in suitable MS box similar to Havells Cat. No. IHBC040006.

Supply, commissioning of 5A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of 15A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of combined 20A, 3-pin, 230V, 50Hz. metal type industrial plug socket assembly with provision of single phase MCB

Supply, commissioning of combined 30A, 5-pin, 3- phase, 50Hz metal type industrial plug socket assembly with provision of three phase MCB

Supply and installation of 100A MCCB 36KA Numbers in a suitable GI box.

Supply and installation of 200A MCCB 36KA Numbers in a suitable GI box.

Supply and installation of 400A MCCB 36KA Numbers in a suitable GI box.

Supply, installation, testing & connection of Numbers 63 Amps., 415V ICTPN switch with MS enclouser. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, installation, testing & connection of Numbers 63 Amps., 415V, 4P MCCB with MS enclouser.

Supply, installation, testing & connection of Numbers 32 Amps., 415V, 4P MCCB with MS enclouser.

Supply, commissioning of 63 Amp, 415V industrial power plug socket with 63 A, 25KA, 4P MCCB in a suitable MS box with all other accessories.

Supply, installation, testing & connection of Numbers 200 Amps., 415V ICTPN switch with MS enclouser.

Wiring of main/sub-main line with 2 nos. Metre PVC multi strand single core FRLS copper wire 6sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through GI conduit with GI clamp/GI nut bolts including all other accessories.

Wiring of light/fan point with 4 nos. PVC Metre multi strand single core FRLS copper wire 2.5sq.mm.1100V grade through GI conduit with GI clamp/GI nut bolts along with 1.0 sq.mm. FRLS copper earth continuity conductor including all other accessories.

Supply, commissioning of compact shrouded mobile copper conductor system, 250A, 4 line (R,Y,B,G) with accessories as per specification . Rate for straight path (Rs/m span)

Supply, commissioning of double arm current collector as per specification and its connection with cabin main switch

Supply, fixing, connection, testing and Numbers commissioning of 415V, 315 Amp TPN switch disconnector fuse unit with sheet steel enclosure with proper fixing arrangement by clamps made of 50mm x 6mm MS flat and 14 SWG MS sheet.

Supply, installation, connection, testing and Numbers commissioning of single phase 750mm sweep, 230V, 50HZ air circulating fan including all accessories.

Supply and fixing of 300mm sweep, metal Numbers body, heavy duty exhaust fan including all accessories.

"Supply and fixing of power supply board Numbers for computer with modular type switches, sockets and boards consisting of the following: i) 03 nos. 6 Amp switch (ISI marked), ii) 03 nos. 6 Amp shuttered plug socket (ISI marked), iii) 01 no. 16 Amp switch (ISI marked), iv) 01 no. 16 Amp shuttered plug socket (ISI marked), v) 01 no. 16 Amp MCB, vi) 01 no. Indicator."

Supply & installation of mobile charging Numbers arrangement consisting with 04 nos. 5 Amp. modular plug socket 240V 50Hz., 04 nos. 6 Amp. modular switch alongwith indicator and fuse. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, erection, testing & commissioning Numbers of modified ELCB 40A, 415V, 3-Phase Decontactor Box with MCB, RCCB and earth continuity monitoring along with Contactor, relay, transformer relay base, circuit fuse holder, toggle switch, HBC fuse link, earth link LED indicator Power Plug and socket powder coated enclosure with hinged door with 2 nos. Earth Bar as per ICF sketch No. ICF/SK/004/2010.

Supply, fixing of 110v Battery Charging Numbers terminal box on Presopan fibre 12mm thick with two terminal and stud, fly nut and fixing of battery charger terminals to be done by masonry work on the ground between the track.

Supply 415/110V, 3 Phase ONAN Lovolite transformer.

Supply, installation and commissioning of Set firefighting equipment consisting of the following :- (I) Wall mounted 5 litre capacity dry foam drive type extinguisher - 4 nos. (ii) GI bucket 12 litre capacity round bottom duly red painted filled with dry sand - 4 nos. (iii) necessary MS angle structure for fixing the above bucket - 1 set, (iv) Rubber mat 25mm thick 1 mtr. wide 2 metre long as per IS:15652:2006 -10 Nos., (v) shock treatment chart duly laminated and framed - 2 sets., (vi) Lay out circuit diagram duly painted on hylem sheet - 2 Nos.

Transportation of cable and other Railway MT-Km supply materials from Rly Store to work site or released materials from site to Rly Store

Dismantling of wiring from different offices Per and handing over the same to the custody location of concerned open line SSE/Elect.(G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of panel and handing over the Set same to the custody of concerned open line SSE/Elect.(G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of HT/LT cable of different Metre sizes and handing over the same to the custody of concerned open line SSE/Elect. (G) under Sr.DEE/G or as per advice of the competent authority

Laying, jointing,connection , testing of Metre 3nos. single core cable1100 volt grade throughgirder with support onsuitable size LT pin /shackle insulators fittedon MS bracket & clampsat suitable intervalsincluding socketing andjointing at terminationbox for 110 V ac linealong with commissioningof line. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, laying and wiringof 110 V dropping Numbers point(from junction box toterminal board) with 6 sq.mm. PVC insulated singlecore multistrandHRFR/FRLSH Cu cable1100 V grade conformingto IS - 694/ 2010 orlatest year in heavygauge ISI marked ( makePresto / Plaza/ AKG ) PVCconduit with uniformwiring clamping at regularinterval ( Each pillardropper should consist of2 nos. 6 sq.mm PVCinsulated cu cable )and tobe terminated at suitable20 Amp SPN Plug socketwith 6-32 Amp MCB (Capacity as required) insheet steel enclosure (Each pillar dropper shouldconsist of 2 no. 6 mm2PVC insulated cu wire ofapprox. 7 m length).(Wire make Finolex,Polycab, KDK, Havells)(MCB make L&T, ABB,Siemens, C&S, Schneider)(MCB should conforms toIS/IEC 60898 and IEC60947-2)

Cutting of concrete and trenching drawing Metre layingand jointing of the 1100Vgrade cable throughunderground as per CEE'sdrawing no.E4/GPST/033/87 andrefilling the trench afterlaying the cable includingmaking good thedamages and thensmooth flooring and re-concreting (18" wide xmin 3' deep) with cement, sand,& stone chips inratio 1:2:4 andconnection with switchergear along with supply ofsuitable size gland, socketetc. as required

Laying of cable through HDPE Pipe by Metre Microtunneling Process including termination of both end with necessary Nut & bolt, suitable rating socket, gland, PVC tape ,cable jointing kits etc (including supply of HDPE Pipe but cable will be supplied by Railway)

Supply , installation ,connection ,testing Numbers ofcombined of 63 Amp 415v50Hz 3 Ph 5 pin metalplug & socket in TPN enclosure with TP MCB (40 - 63 amp as required)(MCB C curve Conformsto IEC 60947 - 2) )(Make- L&T, Havells, Legrand,C&S, Siemens, Schneider,Hager, ABB) Total 13882156.00 Item- 2 Part-II: Electrical/Genl Works for Liluah Yard Augmentation for increasing wagon holding capacity. S No. Item Description of Item Unit Qty Rate Amount No

Supply of Schematic Diagram in original Set along with 06 copies on A-0 papers of different locations showing super imposition of cable route, HT/ LT panels, transformers, location of tubular poles and all other electrical items and works.

HT/ LT cable trenching in underground by Metre digging earth, protection of the cable with sand and brick and filling with earth as per CEE/E.Rly's Drg. No.: E4 GPST/033/87

Supply and laying of 50 mm dia ISI marked Metre heavy duty rigid PVC pipe in wall/ underground by cutting trench/ in wall

Supply and laying of 50 mm dia medium Metre duty GI pipe confirming to IS:1239 (Part-I) underground by cutting trench.

Supply and laying of 80 mm dia medium Metre duty GI pipe confirming to IS:1239 (Part-I) underground by cutting trench ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply and laying of 150 mm dia medium Metre duty GI pipe confirming to IS:1239 (Part-I) underground by cutting trench

Supply and laying by boring method, under Metre the Railway track HDPE pipe 75mm PN-60 (6.0 kgf/sq.cm.) thickness as per IS: 4984:1995.

Supply and laying by boring method, under Metre the Railway track HDPE pipe 200mm PN-60 (6.0 kgf/sq. cm) thickness as per IS: 4984:1995.

Supply of FRP cable tray including support Metre & fixing charges (200 mm).

Supply of FRP cable tray including support Metre & fixing charges (300 mm).

Laying of cable through trench, GI & HDPE Metre pipe, PVC pipe, (FRP) cable tray, cable duct and on wall surface with necessary clamping arrangements etc.

Drawing of cable in concealed way through Metre PF wall/ structure/ building wall etc. along with 'L' hook to be provided at approx. every half meter length.

Supply and installation of cable route Numbers marker slab of size 1.2mtr. x 0.45mtr. x 0.075mtr. with RCC 1:1.5:3 along with re- inforcement 8 mm. dia. (Tor) rod @ 100 mm. center to center in both direction along with lettering inscribed on RCC as directed by the site in-charge complete in all respect.

Supply and fixing of GI fabricated 4-way Numbers cable terminal box of size 250 mm. x 200 mm. x 100 mm., 2 mm. thick.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (16-35) sq.mm.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (50-95) sq.mm.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (120- 185) sq.mm.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (240- 400) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (16- 35) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (50- 95) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (120-185) sq.mm.

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (240-400) sq.mm.

Supply and installation of heavy duty GI Numbers earth pipe 51 mm dia., 2.5 mtr. Long, 4.47 mm. thick (7 SWG) as per IS: 1239/58 including connection with 4 SWG G.I. wire as per CEE/E.Rly. Drg. No.: E4/GPST- 038/94. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, installation of medium duty GI Numbers earth pipe 50mm dia, 3 mtr. Long, 3.65 mm thick (9 SWG) as per IS: 1239 (Part-I) including connection with 8 SWG G.I. wire

Supply and installation of GI flat of 50 mm Kg x 6 mm or GI Wire (6SWG) for earthing arrangement of transformer, HT & LT panel and connection with earth pipe (GI Flat/ Wire to be decided by the EIC).

Supply and erection with foundation of GI Numbers octagonal pole 5.5 mtr. long, pole section of bottom dia. 150 mm., top dia. 75 mm., pole thickness-3 mm. with base plate 240 x 240 x 16 mm. with 04 nos. foundation bolt having 25 mm. dia. and of length 700 mm. along with single/double arm bracket. Loop in & loop out box to be provided inside the pole. Concrete foundation & erection of GI octagonal pole along with grouting of supplied 04 nos. foundation bolts as per Sr.DEE/G/SDAH's Drg. No.: SDAH/G/SS/115, dated: 23.10.2009. Concrete used should be 1:1:2 (M-25 type).

Supply, installation & connection of 4-pole Numbers copper busbar chamber, 100 Amp capacity (4-way) in a suitable MS box.

Supply, installation & connection of 4-pole Numbers copper busbar, 200 Amp capacity, 6 way Copper Busbar Chamber in a suitable MS box.

Supply, commissioning of 5A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of 15A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of combined 20A, 3-pin, 230V, 50Hz. metal type industrial plug socket assembly with provision of single phase MCB

Supply, fixing & connection of 200 Amps., Numbers 3-phase, 415 Volt industrial power plug socket.

Supply & installation of Double Pole (40- Numbers 50)A MCCB 30KA with adjustable overload setting: (0.8- 1.0)x in a suitable GI box concealed in the wall.

Supply and installation of 100A MCCB 36KA Numbers in a suitable GI box.

Supply, installation, testing & connection of Numbers 63 Amps., 415V ICTPN switch with MS enclouser.

Supply, installation, testing & connection of Numbers 63 Amps., 415V, 4P MCCB with MS enclouser.

Supply, installation, testing & connection of Numbers 32 Amps., 415V, 4P MCCB with MS enclouser.

Supply, commissioning of 63 Amp, 415V industrial power plug socket with 63 A, 25KA, 4P MCCB in a suitable MS box with all other accessories.

Supply, installation, testing & connection of Numbers 200 Amps., 415V ICTPN switch with MS enclouser. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Wiring of concealed main/sub-main line Metre with 2 nos. PVC multi strand single core FRLS copper wire 6sq.mm.1100V grade along with earth connection continuity with 1 no. PVC multi strand single core FRLS copper wire 2.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of concealed main/sub-main line Metre with 2 nos. PVC multi strand single core FRLS copper wire 4sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of concealed light/fan point with 2 Numbers nos. PVC multi strand single core FRLS copper wire 2.5sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories. The point wiring will be made using modular switches and boards.

Wiring of main/sub-main line with 2 nos. Metre PVC multi strand single core FRLS copper wire 6sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 2.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of main/sub-main line with 2 nos. Metre PVC multi strand single core FRLS copper wire 4sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of light/fan point with 2 nos. PVC Numbers multi strand single core FRLS copper wire 2.5sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories. The point wiring will be made using modular switches and boards.

Wiring of main/sub-main line with 2 nos. Metre PVC multi strand single core FRLS copper wire 6sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through GI conduit with GI clamp/GI nut bolts including all other accessories.

Wiring of main/sub-main line with 2 nos. Metre PVC multi strand single core FRLS copper wire 4sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.5 sq.mm 1100V grade through GI conduit with GI clamp/GI nut bolts including all other accessories. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Wiring of light/ fan point with 2 nos. PVC Numbers multi strand single core FRLS copper wire 2.5 sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through GI conduit with GI clamp/GI nut bolts including all other accessories

Supply, fixing, connection, testing and Numbers commissioning of 415V, 315 Amp TPN switch disconnector fuse unit with sheet steel enclosure with proper fixing arrangement by clamps made of 50mm x 6mm MS flat and 14 SWG MS sheet.

"Supply, fixing and commissioning of 5 star Numbers rated BLDC type Ceiling fan, 1200 mm. sweep,230V, 50 c/s complete with all accessories. (With Remote)"

Supply, fixing, connection, testing and Numbers commissioning of 400mm sweep, 230V, 50Hz wall bracket fan including all accessories

Supply, installation, connection, testing and Numbers commissioning of single phase 750mm sweep, 230V, 50HZ air circulating fan including all accessories.

Supply and fixing of 300mm sweep, metal Numbers body, heavy duty exhaust fan including all accessories.

Supply and fixing of call bell along with all Numbers accessories.

"Supply and fixing of power supply board Numbers for computer with modular type switches, sockets and boards consisting of the following: i) 03 nos. 6 Amp switch (ISI marked), ii) 03 nos. 6 Amp shuttered plug socket (ISI marked), iii) 01 no. 16 Amp switch (ISI marked), iv) 01 no. 16 Amp shuttered plug socket (ISI marked), v) 01 no. 16 Amp MCB, vi) 01 no. Indicator."

Supply & installation of mobile charging Numbers arrangement consisting with 04 nos. 5 Amp. modular plug socket 240V 50Hz., 04 nos. 6 Amp. modular switch alongwith indicator and fuse.

Supply, commissioning of 1.5 Ton capacity "inverter type" split AC machine fitted with rotary compressor with rated cooling capacity of 18000BTU/Hr or higher, rated power input of 1449 Watts or lower, current drawn (rated) 6.6 Amp or less, atleast 5 steps fan speed, ISSER of 4.70 or better, air flow (IDU) of 583CFM or better, sound level (IDU) of 33dB or less, ecofriendly R-410A refrigerant. The unit should have wireless type remote control and both coils of IDU & ODU should be made of copper. The rate is inclusive of 10feet long copper refrigerant pipe of each of the required sizes.

Supply, fixing & connection of 32 Amps SPN Numbers M C B & starter suitable for 2.2 KW single phase AC machine with all accessories including 25A Shuttered Plug Socket. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, installation and commissioning of Set firefighting equipment consisting of the following :- (I) Wall mounted 5 litre capacity dry foam drive type extinguisher - 4 nos. (ii) GI bucket 12 litre capacity round bottom duly red painted filled with dry sand - 4 nos. (iii) necessary MS angle structure for fixing the above bucket - 1 set, (iv) Rubber mat 25mm thick 1 mtr. wide 2 metre long as per IS:15652:2006 -10 Nos., (v) shock treatment chart duly laminated and framed - 2 sets., (vi) Lay out circuit diagram duly painted on hylem sheet - 2 Nos.

Supply loading/ unloading of 20Mtrs. high mast tower polygonal shape suitable for 16 nos. 200W LED floodlight including supply of suitable MCCB for provision of half-light and full-light, timer & contactor, mechanical components, head frame, pully assembly, winch, lifting motor, lantern carriage link, control gear box, arms resting bracket guide ring, compensating disk, lightning arrestor, foundation bolt, aviation light and all accessories required for erection of high mast tower but excluding the luminaries.

Foundation, commissioning of 20Mtrs. high mast tower polygonal shape including erection of all components and accessories required for installation of the high mast tower including foundation nuts and bolts complete in all respect. (Supply of high mast tower and the accessories will be paid from separate item. Supply and erection of LED luminaries will be paid through separate item).

Supply including transportation andloading/ Set unloading of 12.5 Mtr High Mast, 3,3 shaft thickness in twosections, Top A/F 150, Bottom A/F360 , Base Plate 520 (O/D)x25dimension as per manufacturedesign to suitable for wind speed180 Km/hr. as per IS:875 withhead frame, luminaries carriagesuitable to install 6 no. 150-200Wled flood light fixtures lightningfinial along with the otheraccessories like double drum winch,6mm diameter 2 Rope system SSwire rope, trailing cable 5cx2.5 sqmm , connector, integral power toolmotor, manual handle, junction boxA) Material grade of shaft shall beof S355JO/JR as per BSEN 10025or Equivalent IS: 2062 grade E350(BR) B) Materials grade of BasePlate shall be E250(BR) as perIS:2062 C)Galvanization as perBSEN ISO:1461

Transportation of cable and other Railway MT-Km supply materials from Rly Store to work site or released materials from site to Rly Store

Dismantling of wiring from different offices Per and handing over the same to the custody location of concerned open line SSE/Elect.(G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of pole including light fitting Numbers etc. and handing over the same to the custody of concerned open line SSE/Elect. (G) under Sr.DEE/G or as per advice of the competent authority. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Dismantling of HT/LT cable of different Metre sizes and handing over the same to the custody of concerned open line SSE/Elect. (G) under Sr.DEE/G or as per advice of the competent authority

Laying of cable through HDPE Pipe by Metre Microtunneling Process including termination of both end with necessary Nut & bolt, suitable rating socket, gland, PVC tape ,cable jointing kits etc (including supply of HDPE Pipe but cable will be supplied by Railway)

Supply fixing connection testing and Numbers commissioning of 415V 4Pole 100Amp Switch disconnector fuse unit Conforming to IS/IEC:60947-Part 1 & 3 including rated fuse with SS enclosure with Door interlock with Terminal Shrouds on both sides and Phase Barriers included & proper fixing arrangement on the wall with MS clamps with cable entry box with gland and thimble as necessary for connection of cable ( Switch disconnector unit) BCH MAKE CAT. CODE BXLENC90486

Supply fixing connection testing and Numbers commissioning of 415V 4 Pole 315 Amp switch disconnector fuse unit Conforming to IS/IEC:60947-Part 1 & 3 included rated fuse with SS enclosure with Door interlock with Terminal Shrouds on both sides and Phase Barriers included & proper fixing arrangement on the wall with MS clamps with cable entry box with gland and thimble as necessary for connecting BCH MAKE BXLENC90490

Detection of underground utilities using Sqm ground. Penetrating Radar(GPR) and Electronics Pipeline (and cable)Locator (EPL) in the area of liluah workshop in desirable data format-pdf, AUTO CAD drawing and survey report mobilization & De mobilization of the Survey Team and equipment. Total 19777828.20 Part-III: Electrical/Genl Works for LLH-Re- modelling & Re-Construction of Electrical Power car, AC Item- 3 overhauling & finish Shop. S No. Item Description of Item Unit Qty Rate Amount No

Supply of Schematic Diagram in original Set along with 06 copies on A-0 papers of different locations showing super imposition of cable route, HT/ LT panels, transformers, location of tubular poles and all other electrical items and works.

Supply of cable tray of width 450/ 250/ MT 200/ 150 mm. made of GI channel and fixing on wall with suitable arrangement made of GI flat/ angle/ channel with GI nut & bolt.

Drawing of cable in concealed way through Metre PF wall/ structure/ building wall etc. along with 'L' hook to be provided at approx. every half meter length.

Supply and erection of LT cable gland with Numbers alluminium socket jointing of 4 core (240- 400) sq.mm. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply and erection of heat shrink straight Numbers through LT cable jointing kits of 4 core (240-400) sq.mm.

Supply, fitment, testing and commissioning Set of 11 KV HT XLPE heat shrinkable indoor type cable end termination jointing kit complete with all accessories including lugs suitable for 3 core 95 sq mm HT XLPE aluminium armoured cable 11 KV grade.

Supply, fitment, testing and commissioning Set of 11 KV HT XLPE heat shrinkable straight through cable jointing kit complete with all accessories including lugs suitable for 3 core 95 sq mm HT XLPE aluminium armoured cable 11 KV grade.

Supply and installation of heavy duty GI Numbers earth pipe 51 mm dia., 2.5 mtr. Long, 4.47 mm. thick (7 SWG) as per IS: 1239/58 including connection with 4 SWG G.I. wire as per CEE/E.Rly. Drg. No.: E4/GPST- 038/94.

Supply, installation of medium duty GI Numbers earth pipe 50mm dia, 3 mtr. Long, 3.65 mm thick (9 SWG) as per IS: 1239 (Part-I) including connection with 8 SWG G.I. wire

Supply and installation of GI flat of 50 mm Kg x 6 mm or GI Wire (6SWG) for earthing arrangement of transformer, HT & LT panel and connection with earth pipe (GI Flat/ Wire to be decided by the EIC).

Supply and erection with foundation of GI Numbers tubular pole of 7 mtr. High 85 Kg. weight with single/double arm bracket complete including wiring of light point with 2 Nos. PVC single core copper wire 2.5 sq mm 1100V along with 4 pole (copper) junction box at the top/ inbuilt as per site condition.

Supply, installation & connection of 4-pole Numbers copper busbar, 200 Amp capacity, 6 way Copper Busbar Chamber in a suitable MS box.

Supply, installation & connection of 4-pole Numbers copper busbar, 400 Amp capacity, 6 Way Copper Busbar Chamber in suitable MS box

Supply, commissioning of 5A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of 15A modular type plug socket 230V, 50Hz in a suitable PVC box.

Supply, commissioning of combined 20A, 3-pin, 230V, 50Hz. metal type industrial plug socket assembly with provision of single phase MCB

Supply, commissioning of combined 30A, 5-pin, 3- phase, 50Hz metal type industrial plug socket assembly with provision of three phase MCB

Supply and installation of 200A MCCB 36KA Numbers in a suitable GI box.

Supply and installation of 400A MCCB 36KA Numbers in a suitable GI box.

Supply, installation, testing & connection of Numbers 63 Amps., 415V ICTPN switch with MS enclouser. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, installation, testing & connection of Numbers 63 Amps., 415V, 4P MCCB with MS enclouser.

Supply, commissioning of 63 Amp, 415V industrial power plug socket with 63 A, 25KA, 4P MCCB in a suitable MS box with all other accessories.

Supply, installation, testing & connection of Numbers 200 Amps., 415V ICTPN switch with MS enclouser.

Wiring of concealed main/sub-main line Metre with 2 nos. PVC multi strand single core FRLS copper wire 6sq.mm.1100V grade along with earth connection continuity with 1 no. PVC multi strand single core FRLS copper wire 2.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of concealed main/sub-main line Metre with 2 nos. PVC multi strand single core FRLS copper wire 4sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.5 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories

Wiring of concealed light/fan point with 2 Numbers nos. PVC multi strand single core FRLS copper wire 2.5sq.mm.1100V grade along with earth connection continuity with 1no. PVC multi strand single core FRLS copper wire 1.0 sq.mm 1100V grade through PVC conduit/casing capping including all other accessories. The point wiring will be made using modular switches and boards.

Wiring of light/fan point with 4 nos. PVC Metre multi strand single core FRLS copper wire 2.5sq.mm.1100V grade through GI conduit with GI clamp/GI nut bolts along with 1.0 sq.mm. FRLS copper earth continuity conductor including all other accessories.

Supply, commissioning of compact shrouded mobile copper conductor system, 250A, 4 line (R,Y,B,G) with accessories as per specification . Rate for straight path (Rs/m span)

Supply, fixing, connection, testing and Numbers commissioning of 415V, 315 Amp TPN switch disconnector fuse unit with sheet steel enclosure with proper fixing arrangement by clamps made of 50mm x 6mm MS flat and 14 SWG MS sheet.

"Supply, fixing and commissioning of 5 star Numbers rated BLDC type Ceiling fan, 1200 mm. sweep,230V, 50 c/s complete with all accessories. (With Remote) "

Supply, fixing, connection, testing and Numbers commissioning of 400mm sweep, 230V, 50Hz wall bracket fan including all accessories

Supply, installation, connection, testing and Numbers commissioning of single phase 750mm sweep, 230V, 50HZ air circulating fan including all accessories. ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply and fixing of 300mm sweep, metal Numbers body, heavy duty exhaust fan including all accessories.

"Supply and fixing of power supply board Numbers for computer with modular type switches, sockets and boards consisting of the following: i) 03 nos. 6 Amp switch (ISI marked), ii) 03 nos. 6 Amp shuttered plug socket (ISI marked), iii) 01 no. 16 Amp switch (ISI marked), iv) 01 no. 16 Amp shuttered plug socket (ISI marked), v) 01 no. 16 Amp MCB, vi) 01 no. Indicator."

Supply, erection, testing & commissioning Numbers of modified ELCB 40A, 415V, 3-Phase Decontactor Box with MCB, RCCB and earth continuity monitoring along with Contactor, relay, transformer relay base, circuit fuse holder, toggle switch, HBC fuse link, earth link LED indicator Power Plug and socket powder coated enclosure with hinged door with 2 nos. Earth Bar as per ICF sketch No. ICF/SK/004/2010.

Supply, fixing of 110v Battery Charging Numbers terminal box on Presopan fibre 12mm thick with two terminal and stud, fly nut and fixing of battery charger terminals to be done by masonry work on the ground between the track.

Supply, fixing & connection of 32 Amps SPN Numbers M C B & starter suitable for 2.2 KW single phase AC machine with all accessories including 25A Shuttered Plug Socket.

Supply 415/110V, 3 Phase ONAN Lovolite transformer.

Dismantling of wiring from different offices Per and handing over the same to the custody location of concerned open line SSE/Elect.(G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of pole including light fitting Numbers etc. and handing over the same to the custody of concerned open line SSE/Elect. (G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of panel and handing over the Set same to the custody of concerned open line SSE/Elect.(G) under Sr.DEE/G or as per advice of the competent authority.

Dismantling of HT/LT cable of different Metre sizes and handing over the same to the custody of concerned open line SSE/Elect. (G) under Sr.DEE/G or as per advice of the competent authority

Cutting of concrete and trenching drawing Metre layingand jointing of the 1100Vgrade cable throughunderground as per CEE'sdrawing no.E4/GPST/033/87 andrefilling the trench afterlaying the cable includingmaking good thedamages and thensmooth flooring and re-concreting (18" wide xmin 3' deep) with cement, sand,& stone chips inratio 1:2:4 andconnection with switchergear along with supply ofsuitable size gland, socketetc. as required ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Laying of cable through HDPE Pipe by Metre Microtunneling Process including termination of both end with necessary Nut & bolt, suitable rating socket, gland, PVC tape ,cable jointing kits etc (including supply of HDPE Pipe but cable will be supplied by Railway)

Supply , installation ,connection ,testing Numbers ofcombined of 63 Amp 415v50Hz 3 Ph 5 pin metalplug & socket in TPN enclosure with TP MCB (40 - 63 amp as required)(MCB C curve Conformsto IEC 60947 - 2) )(Make- L&T, Havells, Legrand,C&S, Siemens, Schneider,Hager, ABB)

Design, manufacture and supply of Machine Numbers Room/ Machine Room Less (MRL ) Goods Lift ( G + 2 ),3 Stops, 3Openings, of capacity 2000Kg as per site condition ( in existing lift well ), made of scratch resistant stainless steel car enclosure and door complete with Variable Voltage Variable Frequency (VVVF ) drive, Automatic Rescue Device( ARD ) and all type of safety devices with other associatedaccessories asper CPW Dsystem /specificationi.e. CPWD'sGeneral Specifications for Electrical Works : (PART-III -LIFTS and ESCALATORS) - 2003 asamended uptodate andrelevant IS specification or latest alongwithinstallation,testing andcommissioningof above newlift withrelated civil work and scaffolding. Total 19355118.00

Item Breakup - 2-HT/LT Panels and DBs

"Supply, installation, connection, testing & Set commissioning of indoor type, IEC 61439- 1&2 compliant fully type tested LT MS Panel with production of type test and design verification certificate from OEM (ABB, L&T, Legrand, Schneider, Siemens) consisting of the following. i) ACB 800A, 4Pole, 50KA, 415V, 50Hz EDO type with microprocessor release - 3Nos as incomer/ bus-coupler. ii) MCCB 400A, 4Pole, 36KA, 415V, 50Hz - 4Nos as outgoing feeder. iii) MCCB 200A, 4Pole, 36KA, 415V, 50Hz - 2Nos as outgoing feeder. iv) MCCB 100A, 4Pole, 36KA, 415V, 50Hz - 2Nos as outgoing feeder. v) MCCB 63A, 4Pole, 36KA, 415V, 50Hz - 2Nos as outgoing feeder. vi) 4Pole copper busbar as per IEC 61439 design - 1Set vii) Digital type multi-functional metering system such as energy meter, trivector meter, Voltmeter, Ammeter etc. with individual ON/ OFF LED indication and all other accessories - 2Sets. (The make and specification should be strictly as per the explanatory note. All panels shall be inspected by RITES)"

"Supply and installation of 8Way SPN MCB Set DB consisting of the following. i) SP&N 8Way MCB DB Box - 1No. ii) 40A SP Isolator - 1No. (iii) SP MCB (6-32A) - 7Nos. (Make: As per Explanatory Note)" ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

"Supply, commissioning of 100A, 10KA load line MCB DB consisting of the following. i) 4Way per phase TPN DB board - 1No. ii) 40A SP MCB - 12Nos. iii) 3Pole 100A MCCB - 1No. (Make: As per Explanatory Note)" Total 2408903.00 Item- 2 Part-II: HT/LT Panels and DBs for Liluah Yard Augmentation for increasing wagon holding capacity. S No. Item Description of Item Unit Qty Rate Amount No

"Supply, installation, connection, testing & Set commissioning of indoor type, IEC 61439- 1&2 compliant fully type tested LT MS Panel with production of type test and design verification certificate from OEM (ABB, L&T, Legrand, Schneider, Siemens) consisting of the following. i) MCCB 630A, 4Pole, 36KA, 415V, 50Hz - 3Nos as incomer/ bus coupler. ii) MCCB 300A, 4Pole, 36KA, 415V, 50Hz - 2Nos as outgoing feeder. iii) MCCB 200A, 4Pole, 36KA, 415V, 50Hz - 4Nos as outgoing feeder. iv) 4Pole copper busbar as per IEC 61439 design - 1Set v) Digital type multi-functional metering system such as energy meter, trivector meter, Voltmeter, Ammeter etc. with individual ON/ OFF LED indication and all other accessories - 2Sets. (The make and specification should be strictly as per the explanatory note. All panels shall be inspected by RITES)"

"Supply and installation of 8Way SPN MCB Set DB consisting of the following. i) SP&N 8Way MCB DB Box - 1No. ii) 40A SP Isolator - 1No. (iii) SP MCB (6-32A) - 7Nos. (Make: As per Explanatory Note)"

"Supply, commissioning of 100A, 10KA load line MCB DB consisting of the following. i) 4Way per phase TPN DB board - 1No. ii) 40A SP MCB - 12Nos. iii) 3Pole 100A MCCB - 1No. (Make: As per Explanatory Note)" Total 1322750.00 Part-III: HT/LT Panels and DBs for LLH-Re- modelling & Re-Construction of Electrical Power car, AC Item- 3 overhauling & finish Shop. S No. Item Description of Item Unit Qty Rate Amount No

"Supply, installation, connection, testing & Set commissioning of outdoor type, IEC 61439- 1&2 compliant fully type tested LT MS Panel with production of type test and design verification certificate from OEM (ABB, L&T, Legrand, Schneider, Siemens) consisting of the following. i) MCCB 400A, 4Pole, 36KA, 415V, 50Hz - 3Nos as incomer/ bus coupler. ii) MCCB 200A, 4Pole, 36KA, 415V, 50Hz - 2Nos as outgoing feeder. iii) MCCB 100A, 4Pole, 36KA, 415V, 50Hz -2Nos as outgoing feeder. iv) MCCB 63A, 4Pole, 36KA, 415V, 50Hz -2Nos as outgoing feeder. v) 4Pole copper busbar as per IEC 61439 design - 1Set vi) Digital type multi- functional metering system such as energy meter, trivector meter, Voltmeter, Ammeter etc. with individual ON/ OFF LED indication and all other accessories - 2Sets. (The make and specification should be strictly as per the explanatory note. All panels shall be inspected by RITES)" ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

"Supply and installation of 8Way SPN MCB Set DB consisting of the following. i) SP&N 8Way MCB DB Box - 1No. ii) 40A SP Isolator - 1No. (iii) SP MCB (6-32A) - 7Nos. (Make: As per Explanatory Note)"

"Supply, commissioning of 100A, 10KA load line MCB DB consisting of the following. i) 4Way per phase TPN DB board - 1No. ii) 40A SP MCB - 12Nos. iii) 3Pole 100A MCCB - 1No. (Make: As per Explanatory Note)" Total 1845202.00

Item Breakup - 3-LED Luminaires

Supply, fixing, connection, testing and Numbers commissioning of 2'x2', 36 Watt, indoor type, recess mounted LED light luminaries with BIS certified driver and luminare, operating voltage of 150-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP20 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium/ CRCA housing, color temperature of 5700K to 6500K, CRI>=70, THD<=10%, PF>=0.9, SPD>=2KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of indoor type, surface mounted 18-20 Watt integrated batton LED fittings with BIS certified driver and luminare, operating voltage of 150-270 Volt industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP20 (or better), impact protection of IK03 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), aluminium housing, color temperature of 6500K, CRI>=80, THD<=20%, PF>=0.90, SPD>=2KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of outdoor type 70-72 Watt LED street light luminaries with BIS certified driver and luminare, operating voltage of 140-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP66 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 110Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=20%, PF>=0.95, SPD>=10KV with all accessories for erection of the same. (Make: As per Explanatory Note) ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, fixing, connection, testing and Numbers commissioning of 200-210 Watt LED Highbay luminaries with BIS certified driver and luminare, operating voltage of 150-270 Volt having industrial grade constant current potted driver (minimum driver efficiency of 85%), ingress protection of IP65 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 110Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=10%, PF>=0.95, SPD>=4KV with all accessories for erection of the same. (Make: As per Explanatory Note) Total 1091971.00 Item- 2 Part-II: LED Luminaires for Liluah Yard Augmentation for increasing wagon holding capacity. S No. Item Description of Item Unit Qty Rate Amount No

Supply, erection, fixing and connection of 9 Numbers Watt LED Bulb complete with holder and all other accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of 2'x2', 36 Watt, indoor type, recess mounted LED light luminaries with BIS certified driver and luminare, operating voltage of 150-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP20 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium/ CRCA housing, color temperature of 5700K to 6500K, CRI>=70, THD<=10%, PF>=0.9, SPD>=2KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of indoor type, surface mounted 18-20 Watt integrated batton LED fittings with BIS certified driver and luminare, operating voltage of 150-270 Volt industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP20 (or better), impact protection of IK03 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), aluminium housing, color temperature of 6500K, CRI>=80, THD<=20%, PF>=0.90, SPD>=2KV with all accessories for erection of the same. (Make: As per Explanatory Note) ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, fixing, connection, testing and Numbers commissioning of outdoor type 70-72 Watt LED street light luminaries with BIS certified driver and luminare, operating voltage of 140-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP66 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 110Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=20%, PF>=0.95, SPD>=10KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of outdoor type, surface mounted 200-210 Watt LED flood light luminaries with BIS certified driver and luminare, operating voltage of 140-270 Volt having industrial grade constant current potted driver (minimum driver efficiency of 85%), ingress protection of IP66 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=10%, PF>=0.95, SPD>=4KV with all accessories for erection of the same. (Make: As per Explanatory Note) Total 1432890.00 Part-III: LED Luminaires for LLH-Re- modelling & Re-Construction of Electrical Power car, AC Item- 3 overhauling & finish Shop. S No. Item Description of Item Unit Qty Rate Amount No

Supply, erection, fixing and connection of 9 Numbers Watt LED Bulb complete with holder and all other accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of indoor type, surface mounted 18-20 Watt integrated batton LED fittings with BIS certified driver and luminare, operating voltage of 150-270 Volt industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP20 (or better), impact protection of IK03 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), aluminium housing, color temperature of 6500K, CRI>=80, THD<=20%, PF>=0.90, SPD>=2KV with all accessories for erection of the same. (Make: As per Explanatory Note) ER-CAO-C-HQ-ELECTRICAL/EASTERN RLY

Supply, fixing, connection, testing and Numbers commissioning of outdoor type 25 Watt LED street light luminaries with BIS certified driver and luminare, operating voltage of 150-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP66 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 100Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=20%, PF>=0.95, SPD>=4KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of outdoor type 70-72 Watt LED street light luminaries with BIS certified driver and luminare, operating voltage of 140-270 Volt having industrial grade constant current driver (minimum driver efficiency of 85%), ingress protection of IP66 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 110Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K, CRI>=70, THD<=20%, PF>=0.95, SPD>=10KV with all accessories for erection of the same. (Make: As per Explanatory Note)

Supply, fixing, connection, testing and Numbers commissioning of 150 Watt LED Highbay luminaries (lower wattage luminaries can be accepted if total system lumen is >=16500) with BIS certified driver and luminare, operating voltage of 150-270 Volt having industrial grade constant current potted driver (minimum driver efficiency of 85%), ingress protection of IP65 (or better), impact protection of IK07 (or better), minimum system lumen efficacy of 110Lm/W (or higher), LED life of 50000 burning hours (or greater), pressure die cast aluminium housing, color temperature of 5700K-6500K, CRI>=70, THD<=10%, PF>=0.95, SPD>=4KV with all accessories for erection of the same. (Make: As per Explanatory Note) Total 1689240.00