Construction of Site Office for Geology and Mining site at Talri Nallah Handwara

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (all kinds of soil( complete job.

P/L of dry stone soling in foundation trenches tightly hand packed with hand ramming, watering including costs and carriage of materials from source to site of work. Complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with MIX (1:4:8) complete job

P/L Specified Grade of Reinforced Cement Concrete 1:1.5:3 mix of PCC using 20 mm n/s of aggregates i/c all costs & carriages compete. Complete job

Reinforcement of R.C.C work including straightening ,cutting ,bending ,placing in position and binding all complete with TMT bars . Complete job

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors below plinth. Complete job

Providing and fixing of 12mm ply on inner side and CGI sheets on outer side incl. fixing of wooden frames of necessary sizes incl. nails and other necessary items etc but excluding cost of material (Material supplied departmentally. Complete job

Providing and fixing of available departmental ply/ wood planks as flooring to office and bedroom incl. fixing of wooden frames of necessary sizes incl. nails and other necessary items etc but excluding cost of material .(material supplied departmentally ) complete job

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). Complete job

15mm Cement plaster on the rough side of single or half brick wall of 1 : 6 ( 1 cement : 6 fine sand) complete job

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately), Second class kail wood complete job

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848: complete job

Providing and fixing 35mm thick glazed shutters of Ist class kail wood for windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Complete job

Providing and fixing 35mm thick wire gauze shutters of Ist class kail wood using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : complete job

P/f of Float glass panes incl. cost of beading 4 mm thick glass pane (weighing not less than 10 kg/sqm) complete job

Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete job.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

100mm x 10 mm

150mm x 10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete.(300x16x5mm) complete job

P/F of Aluminium I-Hooks incl cost and carriage. Complete job

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter) complete job

Labour Charges for hoisting and fixing wooden trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete excl. cost of material. Complete job

Labour charges for fixing of corrugated G. S. sheet roofing including vertical/curved surface incl. cost of polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead but excluding cost of CGI sheets excl. cost of CGI sheets. Complete job

Labour charges for fixing of wood work in frames (different size ) of false ceiling, partitions etc. sawn and fixed in position incl. cost of nails etc all complete but excluding cost of material . Complete job

Labour charge for fixing plained eaves boarding of available wood 250x32 mm (nominal size ) including nails other charges complete . Complete job

Labour charges for fixing of of 12mm plywood ceiling including beading,a coat of wood primer & paint and other necessary fixture including screws, nails etc but excluding cost of ply . Complete job

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall complete job

15 mm dia. nominal bore(Medium duty).

20 mm dia. nominal bore(Medium duty).

P/f of 100mm dia PVC pipe of approved quality as decided by the Engineer Incharge. Complete job

P/f of fittings and accessories of approved quality, (100mm dia) complete job

P-trap

Floor –trap

Door – tee

Sink with necessary accessories.

Providing and fixing brass bib cock of approved quality 15 mm nominal bore. Complete job

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completen20 mm nominal bore. Complete job

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete job

Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole wall/basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. Complete job

Providing & fixing White vitreous china water closet squatting pan(Indian type) complete with all operations including all necessary materials, lincl. 10 ltr white PVC flushing cistern and flushing pipe all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm complete the

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. Complete job

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings but without the base support for tank.Complete job

Dry random rubble masonry with hard stone in foundation and plinth using Quarry stones: complete the

Dismantling CGI roofing and sides of store shed including wood Frames and stacking the material within 50 meters lead : complete the

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Complete job

Providing and fixing of mild steel ST52 Boom pipe as boom of drop gate . Complete job

Add Carriage of material including loading and unloading .(lead upto 50km ). Including head load if any . Complete job

Note : Any item which is not included in estimate but is necessary in execution shall be paid as per SSR-2020. Qty can very (+, -)

GHULAM HASSAN MALIK

GH AHMAD GANAI

NAZIR AHMED LONE

JAMEEL AHMAD GANIE