Providing IEI to Newly Constructed Office Building of Diesel Outlet and Guard Room and Renovation of IEI to Existing Fishermans Store, Work Shed and Toilet Block i/c Campus Lighting and Renovation of CCTV System at FLC Guptapara

Amount

IEI WORKS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying, Installation, Testing and Commissioning of BLDC Ceiling Fan (1200 mm), Sweep ISI Marked without regulator with all accessories etc as required, Make: Crompton Model No. ENERGION Riviera with 5 years warranty or its equivalent etc., as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Heavy Duty Exhaust Fan (Metallic Type) 300 mm sweep 1400 RPM with accessories etc as equivalent to Havells Model Turbo Force SP or its equivalent.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying of LED 9W Bulb in the existing Batten Holder similar to Crompton: Cat No LED 9W-B22/E27-CDL or its equivalent make as required.

Supplying, Installation, Testing and Commissioning of CRCA housing Box type Luminaries suitable for T8 LED Tube (1 x 18 / 20W) as equivalent to Bajaj Model No. BLRB - DB 118 or its equivalent make.

Supplying of 20 W LED Tube light with polycarbonate housing designed for high performance as equivalent to Bajaj: Model No. BLRB 20W LED or its equivalent make.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double door

b) 8 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double Door

Supplying and fixing of 63A Four Pole 25 KA 'G' frame MCCB similar to make Havells cat No. IHLGHF0063 alongwith the G frame MCCB Enclosure Four Pole similar to make Havells Cat No.IHEGFP or its equivalent etc., as required.

Supplying and fixing of 63A 4 way Bus Bar Chamber similar to make Havells cat No.IHBC006304 i/c connections or its equivalent etc., as required.

EEI Works Dismantling / removal existing 6 mtrs high street light pole by excavation from the foundation beneath the ground without any damage with suitable power tool and re-installation of the same to the other location with cement concrete 1:2:4 (1 Cement: 2 Course Sand: 4 Graded Stone Aggregated 40 mm nominal size) 70 cm deep foundation and collor of 50 cm above the GL including excavation and refilling etc. as required (Foundation 70 cm below GL and above 50 cm GL)

Supplying of following sizes of XLPE insulated Heavy duty armoured aluminium conductor UG Cable of 1.1 KV Grade conforming to IS: 7098 (part-I) and IS No. 1554 (part-I) 1988 as applicable Make: CCI/ GLOSTER/ Havells/ Polycab/ Finolex. a) 10 Sqmm x 4 Core (M.S)

b) 25 Sqmm X 3.5 core (M.S.)

c) 35 Sqmm X 3.5Core (M.S)

Supplying and Laying of following one Number Double walled corrugated high density polyethylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE fitting for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation & refilling the trench etc as reqd. a)40 mm outer dia and 32 mm inner dia

b)50 mm outer dia and 38 mm inner dia

Supplying and Laying of following one Number Double walled corrugated high density polyethylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE fitting for protection of 1.1 KV grade directly in ground /clamping on wall surface etc as reqd. a)40 mm outer dia and 32 mm inner dia

b)50 mm outer dia and 38 mm inner dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm (Clamped with 1 mm thick saddle)

Supplying and making end termination aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 x 10 Sqmm (25mm)

b) 3 ½x 25 Sqmm (32mm)

c) 3 ½ x 35 Sqmm (35mm)

Minor repairing of existing outdoor Electrical panel including replacement of defective cable connectors, wiring and other accessories inside the panel and cleaning the rusted area & Appling one coat of anticorrosive primer and two or more coats of enamel paint of appropriate shade as required

Supplying and fixing of 25W LED street light fitting similar to make Bajaj EDGE NXT, Cat No. ENXT P 30L WH CR PC SD in the existing 6mtr high street light pole i/c connection testing and commissioning or its equivalent etc as required.

Supplying and fixing of 25W LED Gate light fitting similar to make of Bajaj ARIAN cat No. BGCTN 25W LED WH with MS Collar Housing suitably screwed on the concrete pillar/column of Gate i/c connection testing and commissioning or its equivalent etc as required.

Cabling for existing CCTV System Supplying and laying D- Link, Cat 6 Cable for the existing CCTV camera in the FLC campus i/c connections, testing and commissioning as required

Supplying and fixing of out door 2 MP, IR Bullet camera with IP65 protection having 8mm Lense, 50 mtrs clear vision coverage similar to Make Safe Vission Mode SV-50M as required.

Supplying and fixing of Indoor 2 MP, IR Dome camera having 3.6mm Lense, 20 mtrs clear vission coverage similar to Make Safe Vission Mode SV-48 as required.

Earthing Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok) (Proof/ Test Certificate should be enclosed)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

NAVJEEVAN ENTERPRISES

M/s G K Construction

DAYAL HALDER

RAJ COMPUTERS