Loading
Loading…
Loading…
Tender Value
₹3.2 Cr
EMD Value
₹6.5 L
Closing Date
29 Jul 2026, 3:00 pm
Executive Engineer, CENTRAL DIVISION
EE
EE, Central Division, BCD, patna
Superintending Engineer, South Bihar Circle
SE
Firefighting Installation Work at Suchana Bhawan, Patna for the year 2025-26..
135479
RE NIT-03/CBD/BCD/2025-26
Open Tender
CIVIL
Patna
• (a) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 16.1
Bid Security Amount in Rupees Total Bid Security Amount in Rupees Rs. 650000.00 IFB
• (i) Legal Status of Bidder 4.3(a)
(ii) Place of Registration.
(iii) write Principal place of Business
(iv) Power of attorney of signatory Bid 4.2(iv)
• Total value of civil engineering construction work, in Rupees, Performed in last five years. Minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work ,which must be at least equal to 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year 4.5(A) (a)
2020 - 2021
2021-2022
2022-2023
2023-2024
2024-2025
• Amount in Rupees related to Work Experience of Similar nature Satisfactory completed at least one similar work of value not less than 50% of estimated Cost 4.5(A) (b)
• (c) Executed in any one year, the minimum quantities /amount of the following items of work (units shall be same as in Requirement column). 4.5A( c)
Sl. No. Items Unit Quantity/Amount
1 FIRE FIGHTING WORK Rs. 9180397.00
2. CIVIL WORK Rs. 6772493.00
• Electrical License The contractor or his identified sub-contractor should possess required valid electrical license for executing the building electrification works and should have executed similar electrical works for a minimum amount as indicated in Appendix in any one year 4.5A( d)
• (a) Amount of Existing commitments and ongoing works in Rupees Sec 2-1.4(A)
(b) Amount of Work for which Bid already submitted, in Rupees Sec 2-1.4(B)
• Numbers and Maximum age of Equipments with bidder Type of REFER SBD
• Name of the Personnel and Experince in years and Select from drop down list Personnel / Qualification 4.5(B) (b)
1 Site Engineer B.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E. 1 No
2 Site Supervisor Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder. 1 Nos.
• Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid). 4.2(i)
• Proposed methodology and programme of construction Select from drop down list the proposed methodology and programme of construction, backed with equipment planning and deployment 4.3(l)
• Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)
Affidavit Select from drop down list. Regarding statements made in the required attachments are true and correct. Sec-2, Affidavit
Undertaking Select from drop down list. Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
• Registration No.
IT.& ST Registration & clearance Certificate
Labour License
Character Certificate
NOC for Debar (If required)
CIVIL
PERCENTAGE
L1
1
22 documents required · 22 mandatory
₹10,000
Processing Fee: 11800
₹6.5 L
14-07-2026 03:00 pm AT AFFICE OF SE SOUTH BIHAR CIRCLE , BCD
7 Jul 2026
7 Jul 2026
31 Jul 2026
7 Jul 2026
29 Jul 2026
7 Jul 2026
14 Jul 2026
B.O.Q for the Work of lwpuk Hkou] iVuk esa vfXu’keu vf/k"Bkiu dk;Z o"kZ 2026&27-
B.O.Q Amount Rs. 3,24,95,835.00 Date of Downloading + Uploading : 07.07.2026 to 29.07.2026
B.O.Q Cost Rs. 10,000.00
Earnest Money Rs. 6,50,000.00 Date of Opening Technical : 31.07.2026
Bid Process Charge Rs. 10,900.00 Date of Opening Financial : After Technical Bid
Date of Completion : 03 Month
Sl. S.O.R. Item of Work Quantity Unit Rate Amount
Sub- Head - ( I ) Internal Fire Fighting/Splenker System
1 9.2 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Stainless steel 14.00 Set 5,722.00 ₹ 80,108.00 1455.00
2 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 1455.00
3 13 Supplying and fixing orifice plate made out of 6 mm thick SS (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 10.00 each 1,236.00 ₹ 12,360.00 1455.00
4 14.7 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia 4.00 Set 17,300.00 ₹ 69,200.00 1455.00
5 15.3 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150 mm dia 1.00 each 10,286.00 ₹ 10,286.00 1455.00
6 16.2 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304) 28.00 Set 4,445.00 ₹ 124,460.00 1455.00
7 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket : 30m 14.00 Set 7,920.00 ₹ 110,880.00 1455.00
8 18.2 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) 14.00 each 1,631.00 ₹ 22,834.00 1200.88
9 20 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and Painting with synthetic enamel paint of approved shade as required. 4.00 Set 17,707.00 ₹ 70,828.00 1200.88
10 21.3 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal side wall sprinkler 868.00 each 505.00 ₹ 438,340.00 1200.88
11 23.2 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150 mm dia 14.00 each 8,634.00 ₹ 120,876.00 1200.88
12 24.1 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required 150mm dia 1.00 each 47,728.00 ₹ 47,728.00
13 25 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
14 N.S. Supply, installation, testing & commissioning of mild steel pipe (IS:1239 Part-I) heavy class with DI/mechanical groove fittings like bends, elbows, tees, reducing tees, sockets, reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work. Note : Pipes upto and 50 mm dia shall be threaded joints with DI fitting, above 50mm shall be groove fitting.
15 N.S. Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front. Approximate size 2100x1200x600 mm. 14.00 each 13,750.00 ₹ 192,500.00
16 N.S. Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm. 14.00 each 2,760.00 ₹ 38,640.00
17 N.S. Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. 14.00 each 910.00 ₹ 12,740.00
18 N.S. Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 14.00 each 6,150.00 ₹ 86,100.00
19 N.S. Supply, Installation, Testing & Commissioning of 'ABC' stored pressure type Dry chemical powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683, 6.0 Kg. 14.00 each 3,680.00 ₹ 51,520.00
20 N.S. Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 1.00 each 34,250.00 ₹ 34,250.00
21 N.S. Supply, Installation, Testing & Commissioning of ISI marked (IS:10204) trolly mounted Fire Extinguisher, mechanical foam type capacity 50 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension. 1.00 each 28,240.00 ₹ 28,240.00
Sub- Head - ( II ) External Fire Hydrant System
22 10.2 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel 6.00 Set 5,722.00 ₹ 34,332.00
23 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
24 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 6.00 each 1,236.00 ₹ 7,416.00
25 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
26 18.2 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) 6.00 each 1,631.00 ₹ 9,786.00
27 19.2 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe 3.00 each 13,636.00 ₹ 40,908.00
28 2.10.1.2 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil. All kind of soil Pipes, cables etc, exceeding 80mm dia but not exceeding 300 mm dia 495.00 mtr. 391.70 ₹ 193,892.00
29 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 4.00 cum 3,434.00 ₹ 13,736.00
30 N.S. Providing and placing in proper position controlled percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type stainless steel 63 mm dia, ISI marked male & female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire. 12.00 each 5,002.00 ₹ 60,024.00
31 N.S. Providing and fixing weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 4 nos.15m long hose, 2 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75m x 0.6m x 0.25m). 6.00 each 3,875.00 ₹ 23,250.00
32 N.S. Supply, installation, testing & commissioning of gun metal 2 way Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia. GI suction pipe and 150 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank). 1.00 each 4,654.00 ₹ 4,654.00
33 N.S. Providing and fixing MS cabinet (to enclose above Draw-out/Fire brigade inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.75 m x 0.6 m x 0.45 m). 4.00 each 4,113.00 ₹ 16,452.00
34 N.S. Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-20 kg/cm2 complete and of dial dia 150 mm. 6.00 each 1,386.00 ₹ 8,316.00
35 N.S. Supply, installation, testing & commissioning of mild steel black pipe (IS:1239/IS:3895) heavy class with mechanical groove fittings like bends, tees, reducing tees, elbows, bends, sockets, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221 complete as required. Note : Pipes upto and 50 mm dia shall be threaded joints with DI fitting, above 50mm shall be groove fitting.
Sub- Head - ( III ) Intelligent Fire Alarm System
36 17.2.1.2 Supply, Installation, Testing & Commissioning of Micro processor based intelligent addressable main fire alarm panel,central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors and minimum 120 dtectors per loop and loop length up to 2km, network communication card minimum 320 charachter graphics/LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit(230+ 5%V, 50Hz), 48 hours back-upwith 24 volt sealed maintenance free batteries with automatic charger. The panel shall have the facility to connect printer to print out log and facility to have seamless integration with analog/digital voice exacuation system (which is part of the schedule of work under SH:PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/Modbus over IP complete as per specifications. Two Loop Panel. 2.00 each 239,225.00 ₹ 478,450.00
37 17.2.2 Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required. 1.00 each 200,611.00 ₹ 200,611.00
38 17.2.3 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 1.00 each 108,688.00 ₹ 108,688.00
39 17.2.4 Supplying, Installation,Testing and Commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 350.00 each 2,858.00 ₹ 1,000,300.00
40 17.2.6 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. 1.00 each 2,651.00 ₹ 2,651.00
41 17.2.7 Supply, Installation, Testing & Commissioning of Fault isolator complete with base as required. 25.00 each 3,270.00 ₹ 81,750.00
42 17.2.9 Supplying, Installation,Testing and Commissioning of intelligent addressable thermal detector complete with rate of rise cum fixed temperature thermistor complete with base as required. complete as required. 5.00 each 2,726.00 ₹ 13,630.00
43 17.2.10 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 12.00 each 3,003.00 ₹ 36,036.00
44 17.2.11 Supplying, installation, testing & commissioning of addressable phone control module complete as required 12.00 each 3,267.00 ₹ 39,204.00
45 17.2.14 Supply, Installation, Testing & Commissioning of addressable Manual Call Point complete as required. 12.00 each 3,871.00 ₹ 46,452.00
46 17.2.15 Supply, Installation, Testing & Commissioning of addressable horn cum strobe complete as required. 12.00 each 3,506.00 ₹ 42,072.00
47 17.2.17 Supply, installation, testing and commissioning of fire fighter telephone handset complete as required. 4.00 each 5,740.00 ₹ 22,960.00
48 17.2.18 Supply, Installation, Testing & Commissioning of intelligent interface unit BACnet/ Modbus Protocol i.e supplying communication link between building management system and fire alarm control panel complete as required. 1.00 each 187,744.00 ₹ 187,744.00
49 17.2.19 Supply, installation, testing and commissioning of fire fighter phone jack complete as required. 12.00 each 1,600.00 ₹ 19,200.00
Sub- Head - ( IV ) Public Address System
50 17.3.1 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required 2.00 each 126,411.00 ₹ 252,822.00
51 17.3.3 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required 260.00 each 1,793.00 ₹ 466,180.00
52 17.3.7 Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. 2.00 each 145,793.00 ₹ 291,586.00
53 17.3.9 Supply, Installation, Testing & Commissioning of Voice command Keypad 6zone, with microphone assembly complete as required. 1.00 each 81,756.00 ₹ 81,756.00
Sub- Head - ( V ) Others
(A) Cabling and Wiring
54 17.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 5250.00 mtr. 359.00 ₹ 1,884,750.00
55 17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 250.00 mtr. 173.00 ₹ 43,250.00
56 17.5.3.1 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 3900.00 mtr. 54.00 ₹ 210,600.00
57 1.20 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
(B) Fire Pumps, Valves Accessories
58 1.4 a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 88 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. 2.00 Set 401,826.00 ₹ 803,652.00
59 2.4 a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Drive Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 88 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. 1.00 Set 636,554.00 ₹ 636,554.00
60 3.1 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head 2.00 Set 125,552.00 ₹ 251,104.00
61 5.2 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 1.00 Set 290,734.00 ₹ 290,734.00
DIESEL ENGINE CONTROL Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons,start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
62 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
7.9 200 mm dia (wall thickness 6.3 mm) 25.00 mtr. 2,692.00 ₹ 67,300.00
63 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
64 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
65 15.4 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200mm dia 2.00 each 21,810.00 ₹ 43,620.00
66 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 6.00 each 1,442.00 ₹ 8,652.00
67 4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness 40.00 mtr. 716.00 ₹ 28,640.00
4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness 50.00 mtr. 963.00 ₹ 48,150.00
68 4.7 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
4.7.2 150 mm width X 50 mm depth X 1.6 mm thickness 4.00 each 1,270.00 ₹ 5,080.00
4.7.4 300 mm width X 50 mm depth X 1.6 mm thickness 2.00 each 1,852.00 ₹ 3,704.00
69 4.8 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
4.8.2 150 mm width X 50 mm depth X 1.6 mm thickness 2.00 each 1,383.00 ₹ 2,766.00
4.8.4 300 mm width X 50 mm depth X 1.6 mm thickness 2.00 each 2,156.00 ₹ 4,312.00
70 4.9 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
4.9.2 150 mm width X 50 mm depth X 1.6 mm thickness 2.00 each 1,383.00 ₹ 2,766.00
4.9.4 300 mm width X 50 mm depth X 1.6 mm thickness 2.00 each 2,366.00 ₹ 4,732.00
71 4.10.4 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.300 mm width X 50 mm depth X 1.6 mm thickness 4.00 each 2,823.00 ₹ 11,292.00
72 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 200.00 mtr. 244.00 ₹ 48,800.00
73 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 100.00 mtr. 70.00 ₹ 7,000.00
74 9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.
9.1.8 3 core x 16 Sq.mm. Aluminium Armoured 2.00 each 270.00 ₹ 540.00
9.1.12 3 core x 70 Sq.mm. Aluminium Armoured 2.00 each 424.00 ₹ 848.00
N.S. 4 core x 2.5 Sq mm copper conductor armoured control cable. 4.00 each 289.00 ₹ 1,156.00
75 N.S. Supply, installation, testing & commissioning of mild steel pipe (IS:1239 Part-I) heavy class with DI/groove fittings like bends, elbows, tees, reducing tees, sockets, reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work. Note : Pipes upto and 50 mm dia shall be threaded joints with DI fitting, above 50mm shall be groove fitting.
76 N.S. Supply, Laying, Fixing, Testing and Commissioning of following sizes of XLPE insulated PVC sheathed armoured Copper/aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.
a) 4 core x 2.5 Sq mm copper conductor armoured control cable. 125.00 mtr. 289.00 ₹ 36,125.00
b) 3 core x 16 Sq.mm. Aluminium Armoured Cable 75.00 mtr. 295.00 ₹ 22,125.00
c) 3 core x 70 Sq.mm. Aluminium Armoured Cable 50.00 mtr. 715.00 ₹ 35,750.00
77 N.S. Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.
78 N.S. Providing and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.
79 N.S. Providing, fixing, testing and commissiong of standard mild steel flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as/ IS 6392 table E. ₹ 0.00
80 N.S. Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, sprinkler pump and Jockey pump at drop of pressure, automatically at required pressure setting : 1.00 each 36,500.00 ₹ 36,500.00
Sub- Head - ( VI ) Civil Works
81 4.5 Underground Sump 317000.00 Lts. 23.00 ₹ 7,291,000.00
82 1.4.1 Floor height upto 3.35 meter including water proofing (ecluding raft base). 174.79 sqm 23,610.00 ₹ 4,126,792.00
83 1.3.6 RCC Raft foundation (on ground floor area only). 174.79 sqm 12,170.00 ₹ 2,127,194.00
Add Extra 5.36% for G.S.T. on S.O.R. and D.S.R. - ₹ 590,055.00
Executive Engineer,
Central Building Division No.- 01, Panta
Name of Work :- lwpuk Hkou] iVuk esa vfXu’keu vf/k"Bkiu dk;Z o"kZ 2026&27-
Similar Nature of Work/Material Statement
Sl. No. Nature of Work Unit 100% 50%
1 Fire Fighting Work Rs. 32495835.00 16247917.50
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
70798_05998_Checklist.pdf
NIT • 0.53 MB
E- ten- 03.pdf
NIT • 1.02 MB
SBD NIT 03.doc
NIT • 0.61 MB
boq Suchana bhawan fire fighting.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid