Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 CrAccepted-AOC NIZARABAN PATH HOUSE NO 36 CITY TOWN GUWAHATI P O FATASIL AMBARI P S FATASIL AMBARI DIST KAMRUP METRO PIN 781025 | KAMRUP METRO | ASSAM | 781025 | ₹1.2 Cr | 1 | Accepted-AOC Accepted |
| 2 | 2₹1.4 Cr+₹13.7 L (11.1%)Rejected-AOC | ₹1.4 Cr+₹13.7 L (11.1%) | 2 | Rejected-AOC Not Accepted |
| 3 | Not Admitted-Fee/PreQual/Technical 06 LAWTOLA P O LAWTOLA P S MUKALMUA NALBARI PIN 781126 | NALBARI | ASSAM | 781126 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
14 Nov 2023, 2:00 pmClosed
Chief Engineer, PWD(Roads), Assam
O/o the Chief Engineer, PWD(Roads), Assam
Const of (1) Bhaskar Nagar Block-B B/L-1,Ch.0 m-Ch. 150 m 2) Bibekananda Puram Path at Bhaskar Nagar, Ch. 0 m-Ch. 190 m 3) Rd from Samrat Bhandar to Laxmi Narayan Mandir(at Mora Bharalu Par) ch. 0 m-319 m under MMNPPNA for the year 2023-24.
2023_PWD_33242_41
CE/CW/20/2023-24-Nagariya(GMC)
Open Tender
Civil Works – Roads
Item Rate
180 days
Guwahati
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,700
₹2.7 L
Yes
8 Apr 2024
25 Oct 2023
14 Nov 2023
25 Oct 2023
14 Nov 2023
25 Oct 2023
25 Oct 2023 - 14 Nov 2023
Amount
Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.)
Granular Sub -base with Well Graded Material (Table 400.1) (A) By Mix in place method, Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ii ) For Grading II Material
WBM Grading 3 Using stone sceening Type- B 11.2mm for Gr. III, Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means.
Interlocking concrete block pavement Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504. A) Including Edge block/ Edge restraints
Providing and laying interlocking concrete block pavement having thickness 80mm paving blocks as per IS:15658-2006 as per drawing & technical specification clause 1504. A) Including Edge block/ Edge restraints
Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance
Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand), 600 mm equilateral triangle.
Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand), 800 mm X 600 mm rectangular
Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material., ordinary soil, upto 3.00 m depth
Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11
Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.), PCC Grade M-15
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.), PCC Grade M-10
Supplying, fitting and placing TMT( Fe-500 D) bar reinforcement in sub-structure complete as per drawing and technical specifications Clause,. (a) With other make ISI marked TMT rebar Secondary Producer
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 With Crushed stone (IV) RCC Grade 20 (i) For height upto 5 m
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (i) Sandy materials
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause
Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications , in 1:4 cement mortar as directed by Deptt.
Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204
NIPUN CHANDRA BORA
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .