CERTAIN MAINTENANCE AND PETTY REPAIR WORKS AT DGNCC CAMP UNDER GE (EAST) DELHI CANTT-10

Amount

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in CM 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair incl scafolding etc, complete all as specified and as directed.

M & L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair incl scafolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fair incl scafolding etc, complete all as specified and as directed.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. (Note :- The making groove shall be deemed included in unit rate quoted)

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Make: BERGER (WEATHER COAT LONG LIFE 10), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL MICA MARBLE)

M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of interior primer ,complete all as specified and directed.

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50 mm thick ( design and patern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S&F Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S&FAluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of three track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Area exceeding 2.00 Sqm). (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F factory made uPVC (white/off white) colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note:The unit rate quoted by contractor includes cost of stainless steel wiremesh and includes all other connected accessories. Net opening including frame will be measured for payment purpose, No extra payment will be paid for slider area, slider area frame and sliding system materials shall be included in the quoted rate) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent,

S & F prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws to timber framework all as specified and directed.

S & F for flush shutters 40 mm thick solid core constructions with block boardcore , plywood face panels commercial type on both side complete all as specified and as directed.

S & F for 35mm thick second class hard wood Glazed and skelton shutters, open rebated and prepared to receive wiremesh, gauge, etc (without sashbars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wiremess, etc, sizes of members of shutters as specified in SSR Part -, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

M&L preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges fixing with screws to Iron door frame complete all as specified.

S & F Mild steel 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size Mild steel handles complete all as specified and as directed.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F in repair for mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.

S & F in repairs Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.

S & F in repair for 150mm long mild steel barrel tower bolts of extruded section complete all as specified and as directed.

S & F in repairs 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.

S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 3 universal type suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.

S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed. (Note :- Rates are inclusive of welding and supply of flats including reqd nutbolts wherever required)

S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests, 'P' or 'S' trap and connection to trap and to flushing pipe antisyphonage pipe including provision of cement concrete and making good to floor complete all as specified and dirtected.

S&F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S&F in repairs 15mm PTMT Pillar taps any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed.

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs Angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make : Prayag/Prince/polytuff)

S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.(Make: Jaquar/Marc/Kohler)

S & F in repair Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repair Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F in repair Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.

S&F in repairs 75mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs glass corner shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 5000 lts capacity, thriple layered anit micorbial (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed.

S&F in repairs Stainless Steel grating jalli with central hole 125mm dia suitable for Nahani trap or in any place complete all as specified and as directed.

S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in reapir flushing cistern kit of any type complete all as specified and directed

S & F in reapir flushing cistern handle complete all as specified and directed

S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F health faucet for fixing to 15mm dia GI pipe with 1.00 mtr long pipe, fixed in repairs complete all as specified and directed . Make :- Kohler / jaguar /Marc

S & F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed

S & F in repairs Toilet paper holder chromium plated with flap all as specified and directed. (MAKE : JAQUAR/MARC/KOHLER).

S & F in repairs Soap Dish of chromium plated all as specified and directed (MAKE : JAQUAR/MARC/KOHLER).

S & F in repairs coloured vitrous China wash down water closet wall hung of CASCADE type wall mounted closet including flushing cistern top pull slite and matching cover including fixing of bolts and flush pipe etc complete all as specified and directed. (Make: Jaquar/Cera/Hindware/Parryware)

S & F in repairs Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified.

S & F in repairs Urinal spreader of CP any colour for fixing with 15mm dia pipe complete all as specified.

S & F in repair vitreous china wash basins , flat back size 550x400 mm white excluding taps,waste coupling and pipe but including brackets all as specified and directed.

S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S & F in repair 15mm galvanised iron medium grade fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F in repair 20mm galvanised iron medium grade fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F 20mm outer dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fittings ISI marked on walls/ceiling or laying in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed.

S & F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms complete all as specified and directed.

S & F in repairs PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed in walls in repairs complete all as specified & directed.

S & F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in walls in repairs complete all as specified & directed.

S & F in repairs PVC (SWR) 110mm bore junction double, (double T), equal or unequal with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 110mm bore junction double, (single T), equal or unequal with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 75mm bore bends with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 75mm bore junction Single T), equal or unequal with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 75mm bore junction Double T), equal or unequal with access door, complete all as specified and directed.

S&F S & F in repairs stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

S&F S & F in repairs stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

M & L for preparation of old painted corrugated or plain steel or iron surfaces (Roof top upto a height of 15 mtrs) of any description over 10cm width or girth and applying two coats of synthetic enamel paint (Green/Blue/Red or white colour as per requirement at site and as directed by Engr-in-Charge) complete all as specified and as directed. Note : 1. Application shall be done through fully automatic airless spray machine. 2. Cost of all requisite Spray Machine, scaffolding, ladders and safety gear required for execution of work shall be deemed included in the unit quoted rate

Hire charges for engaging 01No Carpenter, 01No Plumber, 02No Sweepers in 01 shift from 900 hrs to 1700 Hrs per day on all working days including Sundays and Holidays along with complete T&P. The engaged manpower shall report at Parade Ground Service Centre for further detailment to attend day to day complaints at DGNCC Camp.

Cleaning old sewage lines any dia and cleaning of water with sludge from soakage wells with Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (Note : (a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1500/- per day shall be deducted from his payment. (b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of interior primer complete all as specified and directed.

S & F E-board ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 including dismantling of existing steel work of any type complete.

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated steel sheeting, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated or semi corrugated steel sheeting , nainital or similar pattern as in roof coverings complete all as specified and as directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base including demolition of existing PCC of any type not exc 15cm thick complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment over and including 15mm thick screed bed in CM 1:6 after dismantling existing chequired tiles of any type complete all as specieied and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path over & including 50mm thick sand cushioning after dismantling of existing interlocking tiles of any type complete all as specified and as directed.

M & L for Vitrified tiles 7-8mm thick (square/rectangular) of Size 600mmx600mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L 20 mm thick granite of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding after dismantling of existing granite complete all as specified and as directed .

M & L for Machine cut kota stone slab flooring 20-25mm thick over & including15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavated matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete including demolition of existing PCC of any type n exc 15 CM thick all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.

Note for Srl itemNo 1 to 122 :- The work caters for agaisnt this Sch /BOQ is required in piecemeal as and when requried basis over scattered area of DGNCC and the contractor is requried to visit site of work with prior appointment to Engr-in-Charge to ascertain exact scope of work involved and rate quoted for items shall deemed included for these aspect and nothing extra shall be payable on account of any misunderstading later on.

A R construction (BID ID -3104279)

sunil traders (BID ID -3102020)

MAA SANTOSHI ENTERPRISES (BID ID -3098571)

Vipul Construction (BID ID -3103978)

LAXMI GROUP (BID ID -3104278)

M/s Shubh Enterprises (BID ID -3099810)

V M CONSTRUCTION (BID ID -3100434)

M/S Rohit Enterprises (BID ID -3103743)

tarun construction co (BID ID -3104417)