WBPWDTE/EE/BED/NIQ_86/Q of 2025-26-2nd call tender

Dismentling the existing damage , defective & non functioning Electrical accessories by Co's own tools & tackles by maintening normalcy as far as possible as per direction of EIC. and the agency have to submit the dismantled Electrical Installations at the BSMC&H Electrical sub division by their own arrangements with full list of items.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ( Legrand make ) as to GS 8way Enclosure

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens ) as to GS. 2+12 way Enclosure

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for VTPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment Make-Legrand/ Siemens as to GS 8 way

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Make-Legrand / Siemens, as to GS. 415 V, 63A FP (HTPN -1 Nos)

240 V, 40A DP (SPN-2 Nos)

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make-Legrand/ Siemens as to GS. 6A - 32A SP MCB (For SPN & TPN DB)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire ( Finolex / Havells/ KEI / Gloster /approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], and drop Concealed type if reqd as per direction of EIC with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar ncl. bakelite/ Perspex top cover 3 mm thick and incl. 175 mm x100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 10 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire ( Finolex / Havells/ KEI / Gloster /approved by EIC) 19mm bore, 3mm thick polythene pipe, with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish On Board

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 1nos 6A & 1nos 20A plug socket with separate 1nos 6A & 1 nos 20A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240 x 200 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / KEI / Gloster /RR Kabel/Polycab) in suitable size (32/25 /19 mm ) dia 3mm thick Poly. Pipe conceal in wall incl. necy. fittings as required as per G S 2 x 1.5 sq mm + 1 x 1.5sq mm (for separate plug & Security light )

2 x 2.5 sq mm + 1 x 1.5sq mm ( for Power plug & Computer Board)

2 x 6 sqmm + 1 x 4 sqmm ( from TPN DB to SPN MCB DBs)

Supplying of 1.1 KV Grade following sizes Al. Armoured PVC/ XLPE Cable ( Make: Glostar/ KEI/RR Kabel/Polycab/Finolex) as per direction of EIC 4 core 50 sqmm ( from Fedder Piller to MCBPBDB )

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 32 mm dia

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 50 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials . 4 core 50 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 1.5 sq mm

Supply & Delivery of 230 V, 50 Hz, following sizes metal body heavy duty exhaust fan . Make: EPC / Calcutta Fans/ Almonard or any approved and recognised brand by EIC. 12" (30 cm) 1420 RPM

Fixing only exhaust fan making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia incl. Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 12" (30 cm)

Supply of 250 V 50 HZ high flo oscillating type metal body Wall Bracket( Tornedo - 2 ) fan operated by pull cord switch with inbuilt regulator ( Make -CG/ Orient/ PWD Approved) 18" (450 mm)

Fixing of Wall Bracket on wall with necessaryS&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length etc to complete the installation and mending good the damages as per direction of EIC

Supplying & Fixing 3 way(Ph,N,E) Ceiling Rose with complete all accessories Directly on Ceiling/wall and suitable size screw etc.incl. (Make:- Anchor)

S & D of single LED Tube light fitting [Make - Crompton cat no. IGP161 LTT8-16] complete with 1x20 Watt Master LED tube lamps Crompton cat no. LTT8-20 or Equivalent of Wipro/Havells/Surya/Magic suspended below the ceiling with S&F 2x20mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS.

S &DF of Twin LED Tube light fitting [Make - Crompton cat no. IGP162 LTT8-16] complete with 2x20 Watt Master LED tube lamps Crompton cat no. LTT8-20 or Equivalent of Wipro/Havells/Surya/Magic suspended below the ceiling with S&F 2x20mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & delivary of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor (supplied at the time of delivered the fans ) etc. with out regulator, (Make- Usha (Striker plus Star CF Br/Wh) / Crompton Greaves (HS Plus 5 star) Orient ( 5 Star ) and as per direction of EIC as per direction of EIC

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per direction of EIC as per direction of EIC.

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by after making housing for regulator by cutting bakelite top cover incl. making necy. connections etc. as per G.S.

Engraving the deptt. No. for ceilingfan upto 10 letters incl. hifen, stroke or stop as to GS

Painting upto 10 letters of the engraved No. with approved black paint/red paint as required as to GS

Extra for additional one letter incl. hifen,stroke or stop as to GS

Extra painting for additional one letter of the engraved No. with hifen,stroke etc. with black paint/red paint as required as to GS

The additional Safety arragement of celling fans by stranded GI / MS strain wire of suitable gauge with special type socket / thimble / nut bolts which is througly crimped with the strain wire and the wire passing through down rod , also the other end connected with armature spindle by its existing jum nut hole with same specical arrangement as per direction of EIC.

Supply of 230V+/- 5%, 90 W LED outdoor Floodlight with inbuilt 10kv to 12 kv surge protector with IP rating 66 (Similar to Crompton Greaves make cat No.-CRP-411-90-57-SL-GL-NSG /Philips/Surya/Wipro) complete with all accessories as per direction of E.I.C.

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/ projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting.

Inter connection between Loop Box to fittings by 1.1 KV 3 x 1.5 sqmm single core stranded 'FRLS' PVC insulated & unsheathed copper wire (make-Finolex/Havells/KEI) through 19 mm size polythene pipe incl. necy. fittings as required as per direction of EIC

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"x 10" comprising of 4 way brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc, fixing by ms bracket on MS pole as per direction of EIC.

Supplying and fixing Timer panel made of 16 way Distribution Board with transperent front door and din rail for mounting the following items included. per direction EIC.The Box shuld comprising following accessorise. A) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer similar to ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC / Legrand ) – 1 no B) One no. ML-3 conctractor,(L&T make) with ( 2 NO or 1 NO + 1 NC Aux. Contract ) ( Make - Legrand / L & T ) – 1 no C) 4 pole 32 Amps MCB ( L & T / Ligrand ) - 1 no D) Auto / Manual By pass Toggle Switch arrangement – 1 no. E) 250 V , Diode type neon Indicator lamp ( Make - Legrand /L&T) – 1 no F) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar , with spring washer ,nuts etc with this box for termination of power to complete arrangement must be wiring by 4 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make - Legrand /L & T / Crabtree )

SITC of Green Model Cooler cum Purifier ( Intregrated inbuilt with cooler and purifier in a single unit ) 80 ltrs storage capacity. with external diamensions 640 mm x 450 mm x 1350 mm ( ± 10% ) , (W x D x H ) , Operating Power Supply - 230 ± 10 % v AC, 50 Hz, running current in amps (max)-3.2 ± 10 %, Power in watts-625 ± 10 %,Water storage tank capacity-80 ltr, capacity with comfort level water outlet temperature at 17 deg c-60 lph,refrigent-r134 ( Green Gas ) 22, Compressor make- Emerson,thermal insulation for storage tank- puf,total no. of faucets-02 (1 normal+1 cold), recommendd max water flow rate through the faucets in lpm-1.5,no of stages for filter cum purifier-03,no of purifier circuits-03,purifier fault indication (buzzer),visual control (leds),water flow swith,10 minutes UV auto shut off,storge tank material & body material- front SS 304 & rest pre coated steel,working with -0.4 kg/cc min. water input pressure and 2 kg/cc of max. water input pressure, integrated water cooler cum purifier with end point/last point purification technology, including one year warranty as per condition. [Make -- EUREKA FORBES /KENT / UNILEVER.]

Please Enable Macros to View BoQ information