PROVN OF FENCING FOR FOOTBALL GROUND AT INS NETAJI UNDER GE (I) (CGN) KOLKATA

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supply and fixed hot rolled medium and high tensile steel of grade E 250 quality A conforming to IS 2062: 2011 as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S & F hot rolled medium and high tensile structural steel of grade E-250 quality A conforming to IS 2062: 2011 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar works complete all as specified and as directed.

Supply and fixed mild steel screw bolts (machine made), diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 15 cm but not exceeding 22.5 cm long complete all as specified and as directed.

Supply and fixed PVC COATED CHAIN LINK of mesh size 50 x 50 mm made of GI wire of dia 4mm , PVC coating 1mm (minimum) , overall dia 5.0 mm (Minimum), and minimum weight not less than 5.5 KG/SQM, fixed with nut and bolt with washer to angle or MS plate section complete all as specified and as directed. Note:- Flat iron, nut , bolt and washer shall be measured and paid separately under respective items.

Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

HIGH HILLS INFRA

Shanti Construction Company