COMPREHENSIVE MAINTENANCE FOR CENTRALIZED BLDG AT ZONE A AREA AT BB CANTT SRINAGAR

Supply and installation of SBR rubber base layer with 100% EPDM rubber gym flooring tiles 500mm x 500mm x 30mm thick with pigmented top layer of colour and pattern as approved by GE, anti skid surface, heavy duty, weather resistant, fixed with bonding/adhesive as per manufacturer's instructions with preparatory work to prepare the surfaces for laying floor tiles complete with and including dismantling of old flooring of any pattern complete all as specified and directed . NOTE:- Tenderers are requested to read the description of item carefully/ properly before quoting the rates as the item is specific.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers including dismantling of existing roof sheets of any pattern , complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including dismantling of existing roof sheets of any pattern, complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing roof sheets of any pattern, complete all as specified and as directed

S & F 2mm thick UV protected multiwall/solid polycarbonate plain/ corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of existing roof sheets of any pattern, complete all as specified and directed .

M & L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed .

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed/framed work, complete all as specified and as directed

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets. , complete all as specified and directed .

M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed.

S&F in repair wooden laminated flooring 1200x1200x8-10mm thick with adhesive and base as specified by manufacturer ,including 12mm thick BWR plywood and necessary farme work and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed.