Estimate for Street Design ...

Amount

Analysis for RCC Pipes NP2 Class 300mm dia including Lowering plain, loading, unloading, stacking and Jointing of pipe at convenient points as per Item No. 21.44.6 and 21.45.6

Providing and stacking of Phoenix sylvestris Roxb. (Wild date palrn/khajur) of height 180-20 cm. in 30-35 cm size HDPE Bag as per direction of the officer-in-charge.

providing and fixing Tricolor Lights on 4 m high poles, Powder coated with all accessories and complete in all respects. Approved Make - lightix and vak

Providing and fixing Victorian Light Poles with 5 m high light pole decorative tube with powder coating complete in all respects. Approved Make - lightix and vak

Providing and fixing Tricolor Lights with all accessories and complete in all respects. Approved Make - lightix and vak LED Tricolor Light

Providing and fixing multilevel fountains in white marble of superior quality with at least 4 m dia and 2.6 m height. Including installation on site with all plumbing and electrical connections etc complete in all respect

Providing and fixing three no.s contemporary art sculptures of Indian breed cow made in FRP or waste-to-art format, including installation complete in all respect.

Providing and fixing red sandstone bollards of 3 ft height with integrated jaali and acrylic sheet and LED luminaire. Complete in all respects.

6 No. Ornamental Design FRP pillar FRP base pedestal with the vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital suitably mounted at appropriate height complete as per design enclosed. Complete pillar suitably grinded spray primered and subsequently spray painted with two coats of enamel paints is required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design copy enclosed. The spandrel (L-Bracker) having length 310mm and height 300mm the frieze (Top Panel) height 220mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 40mm x 25mm, frieze properly welded to the column pollars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with two coats of enamel paint. iii) 3 No. cast iron base panel railing with frame Floral and Ornate decorative design cast iron side railing panel as per design copy enclosed having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 40 x 25 mm. the bottom mild steel pipe having 3 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 50mm welded at the base to hold the panel in the ground. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with two coats of enamel paint in required shade. (iv) One set of top frame with frp roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 2 mm thick bent to profile on either ends with clear width installation of frp sheets fixed horizontally along the length between column pillars. Each sheet enamel painted in red color on both sides. Each such sheet properly riveted to horizontal sheets. The roof pipe frames properly primered and painted in red color. The complete item is without C.C floor and without sitting bench. rates are including with all taxes.

Providing and lowering RCC pipe class and specials into trenches for all depths and laying out the same to correct alignment gradients levels etc., including all dressing and trimming and cutting of concrete beds and joint holes, supporting the pipes and specials in the correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching haunches and envelope are completed. The pipes shall rest on the beds at all points throughout their lengths and to ensure this they shall be grouted where necessary as described in item no.21.38 including carriage from the stores of the Engineer-in-charge and safe delivery thereof at the site of works. This includes loading, unloading, and stacking at convenient points adjacent to the works ready for lowering as may be found most convenient in the interest of work. (For NPI or NP2 and NP3 or NP4 pipes) 300 mm internal diameter of sewer (Class NP1 to NP2) As per Analysis A.S 1

Bidder Name

Amount

M/s Hisar Construction Company (GSTN-06AADFH6914R1ZW) BID ID -1206372

jaipal singh s/o sardara singh (GSTN-06BCAPS0242R1ZD) BID ID -1208371

LS CONTRACTOR (GSTN-06AHAPS9586J1ZN) BID ID -1208385

The Shiv Shakti Cooperative L/C Society (GSTN-NA) BID ID -1208460

Sudhir Gahlawat Contractor (GSTN-NA) BID ID -1208396

Sudhir Gahlawat Contractor (BID ID -1208396)

M/s Hisar Construction Company (BID ID -1206372)

jaipal singh s/o sardara singh (BID ID -1208371)

The Shiv Shakti Cooperative L/C Society (BID ID -1208460)

Sudhir Gahlawat Contractor (BID ID -1208396)

M/s Hisar Construction Company (BID ID -1206372)

jaipal singh s/o sardara singh (BID ID -1208371)

The Shiv Shakti Cooperative L/C Society (BID ID -1208460)