Construction of Girls Toilet at Primary School at Bhagat Mohalla Ichigam

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.All kinds of soil

Supplying and laying of quarry stone soling/GSB hand packed tightly incl ramming watering and filling of interstices incl all carriage complete job Soling/Plinth Filling/Septic Tank/Steps

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Mud Mat

Reinforced Cement Concrete (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) P/L in position specified grade of reinforced cement concrete incl curing but excluding the cost of centering, shuttering , finishing & reinforcement .All works upto plinth level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto five level incl curing but excluding the cost of centring, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

P/L in position cement concrete of specified grade including curing but excluding the cost of centering & shuttering .All work upto plinth with: 1:3:6(1 cement:3 coarse nallah sand:6 graded stone aggregate 20mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1Cement: 6 coarse sand) including all carriages

Extra for brick work with common burtnt clay bricks/cement concrete bricks in superstructure above plinth upto floor five level

12mm internal cement plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand)

Providing and fixing of vitrified anti-skid floor tiles 9-10mm thick with water absorption less than 0.08% and conforming to IS:15622 in different sizes in all colour and shade laid on 20mm thick cement mortar bed 1:4 mix grouting the joints with white cement and matching pigment.Complete job Size of tile 500X500mm

P/F Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer) of approved make, in all colours , shades except burgundy , bottle green , black of any size as approved by EIC , in skirting , risers of steps & dados over 12mm thick bed of cement mortar1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm , incl pointing in white cement mixed with pigment of matching shade complete.

Providing woodwork in frames of doors, windows,clestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of reqd dia Kiln seasoned and chemically treated imported wood

P/F glazed shutters for doors, windows & clerestory windows using 4mm thick float glass panes incl ISI marked MS pressed butt hinges bright finished of reqd size with necessary hardware fittings. Kiln seasoned & chemically treated imported wood 30 mm thickness of shutter W

P&F panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows with necessary hardware fittings (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled & glazed shutters 25mm to 40mm thick Kiln seasoned & chemically treated imported wood D

P&F wire gauge shutters using galvanized MS wire gauze of avg width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows & clerestory windows with ISI marked MS pressed butt hinges bright finished of reqd size with necessary screws as per direction of EIC Kiln seasoned & chemically treated hollock wood

Reinforcement for RCC work incl. cutting, bending, binding,placing in position all complete including carriage: TMT bars of grade Fe-500D or more

Point wiring for switch controlled primary light /fan /exhaust fan points with 2x1.5 sq mm FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires of Polycab /Finolex /Anchor / Havells /Paraflex make, to be laid in recessed or surface conduitng system (including cost of providing and laying of 25 mm dia , 2 mm thick PVC conduits of Polypack / Ravindra Green / Finolex / Anchor make with allied accessories like bends , lighting deep junction boxes ,binding wires ,ties etc including cutting of walls and refacing of same with cement concrete or PoP after laying of conduits, complete job) and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 6 amp control switch with modular cover plate of Schneider /ABB /L&T /Legrand make , complete as per specification and as required to be provided and fitted on GI boxes (including Cost of GI boxes ,switches ,plates etc ) .The job includes providing and laying of circuit wiring with 2 x 1.5 sq mm PVC insulated multistranded copper wires, to be laid through PVC conduit from Distribution Board to first switch in sub-circuit, complete job including cost of conduits .(Separate wiring for normal and invertor supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length) Complete as required.

Supply, Installation, Testing and Commissioning of LED bulb (round /square ) surface/recessed mounting Down Lighters (300mm x 300mm ) having CRCA /Aluminium Body (Commercial type ) ,minimum lumens 100 lm/w,the luminaries housing should be crca /aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of Philips / Havells/Wipro/ Helonix /Jaguar /Trulux make incl making of necessary Connections.). The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department.

Point wiring for 16 A Socket outlets ( Two out lets wired in one sub circuit) with 3x4 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires of Polycab/Finolex/Anchor/Havells /Paraflex make, to be laid in recessed or surface conducting system (including cost of 25 mm dia ,2 mm thick PVC conduits of polycab /Anchor /finolex /Ravendra Green make with allied accessories like bend ,ties ,binding wires ,including cutting of walls and refacaing of same with cement concrete or pop after laying of conduits complete job and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 A control switch with modular cover plate of Schneider /ABB /L&T /Legrand make , complete as per specification and as required to be provided & fitted on GI boxess with inter connection complete as per specifications and as required (including cost of GI boxes ,switches ,sockets ,plates etc ) . The job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit (Maximum two points shall be connected / provided in one circuit and no extra circuit wiring shall be paid what so ever reason or length) (including cost of conduits).

Supply, installation, testing and commissioning of exhaust fan(s), heavy duty, wall-mount, metallic body exhaust suitable for continous operation, sweep size 300mm ,power coated metallic body , aerodynamically balanced metal blades, built-in front/rear protection grill,power factor not less than 0.9, service value incl safety pin , nut bolts, washers , temperature rise=75oC (max), insulation resistance more than 2mega ohm, suitable for 230V, 50Hz & incl iron hook complete.Usha Striker/Havells Oyster Metallic/Crompton Flavia/equivalent make as directed by EIC.Complete job

Carriage by MT(20km):

Sand for an average lead of 20km

20mm nominal size stone aggregate for an average lead of 20km

40mm nominal size stone aggregate for an average lead of 20km

Centering & shuttering incl strutting , propping etc & removal of form for:

Foundations , footings , bases for columns

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies, steps and access platforms

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

P/F PPR Union PPR Union 25mm

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. of approved brand like Hindware/ Jaquar/Somany/equivalent make.Complete job

P/F gun metal gate valve with CI wheel of approved quality(screwed end) 25 mm nominal bore

P/F ball valve (brass) of approved quality ,high or low pressure, with plastic floats complete 15mm nominal bore

P/F gun metal non-return valve of approved quality (screwed end) 25mm nominal bore

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes icluding all necessary fittings.Complete job.

P/F 100mm sand cast iron grating for gully trap

P/F WC squatting pan(Indian type WC pan) with 100mm sand cast Iron P or S trap , 10 liter low level white PVC flushing cistern, incl flush pipe (of approved brand) with manually controlled device (handle lever) conforming to IS 7231 , with all fittings & fixtures complete, incl cutting & making good the walls & floors wherever reqd. White vitreous china or Orissa pattern WC pan of size 580x440mm with integral type foot rests

Providing and fixing PTMT shelf,small,12''X5.5''of approved quality and colour, weighing not less than 300 gms. like Hindware/ Jaquar/Somany/equivalent make complete job

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms like Hindware/ Jaquar/Somany/equivalent make.Complete job

Providing and fixing 100mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends etc all complete

Providing and fixing 75mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends etc all complete

P/F PVC stay & clamps for PVC pipes:

P/F PVC cowl 100/75/40mm dia

Providing and fixing PVC floor trap of approved make:

P/F bend of reqd degree with access door , insertion rubber washer 3mm thick , bolts and nuts complete.PVC S&S pipes

P/F T junction of standard make

P/F PVC reducer 100-75mm dia

PVC collar 75mm

P/A white cement based putty of specified thickness , of approved brand with manufacture, over plastered wall surface to prepare surface even & smooth complete(1mm)

P/F precast RCC rings for soakage pit of approved diameter(900-1000mm) , 50-75 mm thick, including the cost of reinforcement, centering, shuttering,curing,carriage ,loading/unloading, excavation, lowering in proper alignment, jointing with cement mortar, & complete as directed by EiC incld. Head Loaded