PROVN OF COVERED SHED AND CONNECTED WORK IN M ZONE PROVN OF TEMP TOILET BLOCK FOR TROOPS AT DEPOT AREA IN C ZONE SPL REPAIRS TO BLDG NO T 99 AT DEPOT AREA IN C ZONE AND PROVN OF TWO WHEELER PARKING WITH HARD STANDING NEAR BLDG NO T 76 AT RMS

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level and removing the debris off the premises complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashlar facing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.

Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified and as directed.

Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and as directed.

Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed.

S&F anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed.

S&F anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw complete all as specified and as directed.

S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and as directed.

Dismantling of chicken wire lathing etc complete all as specified and directed.

S&F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and as directed.

M&L for 10 mm thick plastering in CM (1:6) the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering in CM (1:4) on one side of lathing finished even and smooth without using extra cement etc complete including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and directed.

M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and directed.

Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for complete removal of exisitng treatment of old decorated surfaces of wall applying two coats of oil emulsion distemper over a coat of primer over coat of wall care putty(1.5 to 2mm mm thick in two layers ) for obtained smoothness of wall surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink wood primer etc complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M&L for cement concrete type B-1 (1:2:4) (20 mm graded stone agg) as in surface channels and drains complete all as specified and as directed.

M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed.

All as per item No 27.00 (here-in-before) but except timber complete all as specified and directed.

M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S& F for 4 mm thick verned decorative (no of ply 05) grade -I (with BWR resin Plywood, grade BWR, type BB, fixed with decorative face verneer on one face fixed with screw /nails to timber frame work complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated 20mm dia with fixing brackets, stops, rollers etc. fixed in repairs complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation over areas n.exc 1.5m deep & getting out soft/loose soil complete all as specified and directed.

Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil complete all as specified and directed.

M & L Plain cement concrete (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC (Nominal Mix), Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Nominal Mix), Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) in Column piller post and strut complete all as specified and directed.

M&L for RCC (Nominal Mix), Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & waste of form work sides of concrete foundation footing, bases of columns, plinth beams and similar works flat rough finished surface of concrete complete all as specified and directed.

Use & waste of form work for sides of pillar , posts struts,piers columns complete all as specified and directed.

M&L for RCC (Nominal Mix), Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for RCC (Nominal Mix), Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams complete all as specified and directed.

Use and waste of formwork to chajjas, troughts and similar items including edges complete all as specified and directed.

M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All same as per item No 51.00 (here-in-before) but 5mm dia and over and including 10mm dia in stirrups spacers and binders.

M & L for PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) as in coping including necessary form work all as specified and directed

M&L for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of primer over 1.5mm thick of wall care putty on wall surfaces complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed .

S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade complete all as specified and directed.

S&F MS butt hings medium weight cold rolled 100mm size complete all as specified and directed.

S&F 200 mm long aluminium anodised tower bolts complete all as specified and directed.

S&F 150 mm long aluminium anodised tower bolts complete all as specified and directed.

S&F 100mm long aluminium anodised handles cast coppercomplete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares. nexc 0.5 Sqm each complete all as specified and as directed.

M&L for sand filling under floor well ramming including watering as required Spreading & leveling in layers n.exc. 25cm thick complete all as specified and directed.

M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and directed.

M&L PCC (1:4:8) type D-2(using 40 mm graded stone aggregate) 100 mm thick as in sub base of floor complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, over and including 10mm thick CM (1:4) backing coat complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 , (using 20 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed.

Removing excavated material n exc. 100m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Removing excavated material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm complete all as specified and directed.

S & F steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed

S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed.

M&L for preparation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a red oxide primer complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on cement mortar (1:4) on brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on cement mortar (1:6) on brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of new wall surface and two coats of cement base paint on walls over a coat of primer complete all as specified and directed.

S&F 15 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls, ceiling or laid on floors complete all as specified and as directed.

S&F 20 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls,ceiling or laid on floors complete all as specified and as directed.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and directed.

S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor complete all as specified and directed.

S&F of PVC (SWR) 75 mm dia pipe as per specification complete all as specified and directed.

S&F of PVC (SWR) 75 mm dia vent cowl pipe as per specification complete all as specified and directed.

M & L for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

Material and labour for brickwork with sub class `B' bricks(using old size burnt bricks) in one brick thick honey comb walling, built in cement mortar (1:3) complete all as specified and directed.

M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and directed.

Supply & fix 150 mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

M & L Vitreous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closd pattern either flat bottom and cover and mild steel chromium plated of aluminised hinging device, complete fitting complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) complete all as specified and as directed.

S&F PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as specified and as directed.

S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed.

S&F toilet paper holder, coloured vitreous china, box type fixed in wall complete all as specified and directed.

S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm. fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Glass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long complete all as specified and directed.

S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed complete all as specified and directed.

M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 30 mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and as directed

M & L in repairs for 25mm thick and 200 mm width second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed.

S&F 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed by Engineer-in Charge.

S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Aluminium sliding door bolt 300 mm complete all as specified and directed.

S&F Pressed steel frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified, supplied and fixed etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2(using 40 mm graded stone aggregate) for filling of frame complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides but with partical board side complete all as specified and directed.

S&F CP towel rail 600mm long with brackets, aluminium anodised 20mm dia complete all as specified and directed.

S&F CP grating 100mm dia PTMT with waste hole complete all as specified and directed.

S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square not exc 0.50 Sq.m in each pane, complete all as specified and directed.

M & L Preparing the new surfaces of walls plastered, and applying two coats of exterior weather paint over one coat of primer over a coat of putty(2 mm thick in two layers) on wall surface complete all as specified and as directed

M&L for complete removal of exisitng treatment of old decorated surfaces of wall applying two coats of exterior weather paint over a coat of primer on wall surface complete all as specified and directed.

M&L for PCC (1:2:4) Type B-1(using 20mm graded stone aggregate) 25 mm thick as in correction layer of flooring finished even and fair using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) Type D-2(using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough complete all as specified and directed.

M&L for PCC (1:2:4) Type B-2 (using 40mm graded stone aggregates ), 75 mm thick as in finishing surfaces of concrete finished even and rough complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed with grey cement and no pigment complete all as specified including preparation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 complete all as specified and directed.

S& F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

S& F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts length of bolt exc 10 cm and n exc 15 cm long dia of neck 11 to 15 mm complete all as specified and directed.

S& F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc n exc 25 cm long 16 to 20 mm dia of neck complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F of 20 mm gate valve valves (brass insert) as per requirement of the site complete all as specified and directed.

M&L for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl Urinal spreader complete all as specified and as directed.

M&L for precast cement concrete type B-1 (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar (1:6) including necessary formwok complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (40mm grade stone aggregate) as in bed to 110 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

Supply & fix DWCPE 180 (OD)/150 (ID)mm diameter pipes laid in trenches complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (40mm grade stone aggregate) as in bed to 180 mm dia DWCPE/SWR /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. as required at site complete all as specified and as directed.

One light/fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin socket outlet 5 Amps on the independent board.

All as per item No.144.00 (here-in-before) but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed.

M&L for Point wiring for One light/fan point controlled by one, one way switch complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. as required at site complete all as specified and as directed.

Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk GI box for mounting of fittings like switch, socket and fan regulator etc and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge

One light point controlled by one, one way switch .

One Ceiling fan/ exhaust fan point controlled by one, one way switch.

All as per item No 147.00 (here-in-before) but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

S&F Switch piano flush type single pole, one way 5A complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and directed.

S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and directed.

S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and directed.

S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.

S&F LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with twin/three core twisted flexible copper conductor cable of suitable size, flexible hose from ceiling rose to fitting complete all as specified and as directed.

S&F LED light fitting 1 x 10 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed.

Supply , fixing and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

M&L for sub main wiring two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm +one run of 4.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length

Taking down Exhaust fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic aluminium paint (For MS Clamps and Hooks) complete all as specified and as directed.

S&F in repairs metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

S&F in repairs MCB Distribution board double door type SPN 12 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.

S&F in repairs MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed.

S&F in repairs MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed.

S&F in repairs MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

M&L for laying of LT UG cable , XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 25 sq mm, 2 core including taking down UNSV complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 6 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for fine river washed sand in trenches complete all as specified ans as directed. NOTE: For payment purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

Supply and laying tubes light grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore GI tubing complete all as specified and as directed.

Material & labour for cutting/ digging of existing Hard surface of cement concreet/Bituminous road of size not less than 45 cm in width and 20 cm deep for laying of GI/CI pipe & making good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of soil complete all as specified and as directed.

Supply & laying tubes ' Light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed.

Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 25 mm dia bore including complete all as specified and as directed.

S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore Bib tap fancy type chromium plated with long shank all as per specified and as directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed.

Supply and laying tubes light grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore GI tubing complete including taking old UNSV one complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 with 10mm thick CI cover plate hinged to angle iron frame of suitable size, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type.

SHRI MADAN SINGH (BID ID -3391746)

KAILASH KUMAR LADHA (BID ID -3391939)

PERFECT BUILDERS AND SUPPLIERS (BID ID -3397020)

MS SADHNA RAHUL (BID ID -3395873)

SHRI HRIDAY NARAIN GIRI (BID ID -3396641)

M/S Lucky Builders (BID ID -3391826)

M/S RAHUL TRADING CO. (BID ID -3391580)