Baligaon to There Gaon

Amount

Maintenance of Earthen Shoulder (filling with fresh soil) : Making up loss of material/ irregularities on shoulder (average 150mm filling) to the design levelby adding fresh approvedsoil and compacting it with appropriate equipment

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up the interstices of coarse aggregate,watering and compacting to the reqd. density (with an initial lead of 5.0 km). By Manual Means. Grading- III. Using Screening Type-B (11.2mm Agg)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of specified quantity using mechanical means) (including cost of testing of materials at site and laboratory as directed by the deptt.). Primer @ 0.60Kg per sqm. With bitumen emulsion-CSS-1h.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (including cost of testing of materials at site and laboratory as directed by the deptt.). With Bitumen emulsion CRS-1. Granular surfaces treated with primer.

Semi-Dense Bituminous Concrete (providing and laying semi Dense concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.5-5% of mix and filler Transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect.

Providing and fixing of typical PMGSY informatory sign board with logo as per MORD specifications and drawing three MS plate of 1.6mm thick top and middle plate duly welded with MS flat iron 25mmx5mm size on back on edges the lower plate willbe welded with MS angle iron frame of 25mmx 25mm x 5mm.the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embended in cement concrete M15 grade blocks of 450mm x450mm x600mm,600mm below ground level. the top most dimond plate will be welded to middle plate by 47mm x 47mm of 12swg steel plate tube. all ms will be stove enameled on both sides lettering and printing arrows,border etc, will be painted with ready mixed sythetic enamel paint of superior quality in required shede and color. all section of framed post and steel tube will be painted with primer and two coats of exoxy paint as per drawing clause 1701 and Annexure 1700.1