MPFUND 2023-24

Amount

The high mast light consists of shaft section, Head Frame and Pulley assembly, lantern carriage wire ropes, cables, winch, optical external / internal power tool foundation accessories, aviation obstruction lights, lightning arrester, MCB and Socket etc., The shaft sections are made of BSEN 10025 grade mild steel polygonal and continuously tapered. These are single hot dip galvanized and have no circumferential welds. The most standardized height of 16m. The number of section are maximum two for up to 16m. These sections are telescopically slip fit jointed without any welding at site.The structure should be capable to withstand the wind loads as per is 875. Necessary back up STRUCTURAL DESIGN is a must for this purpose which should determine the basic geometric configuration of the mast to be used for a given application The luminaries 6 Nos. of 200 LED lamp tubler Luminor with IP 65 rating are mounted on the lantern carriage by luminaries mounting arm assembly and are aimed properly to achieve the desired lighting performance. The lantern carriage is of raising and for this purpose a THREE WIRE SUSPENSION system along with a double drum winch is provided for most optimum balancing of the lantern carriage. COMPENSATING DISCS and SAFETY WIRES are provided for maximum safety and flexibility. The casting of the foundation is done as per specific foundation designs done by certified structural experts. The power tool can be external portable type where one unit can be used for a multiple number of masts if the rating is same and masts are located nearby. Otherwise, the power tool can be for most optimum balancing of the lantern carriage. COMPENSATING DISC and SAFETY WIRES are provided for maximum safety and flexibility. The casting of the foundation design done by certified and structural experts.The power tool can be external portable type where one unit can be used for a multiple number of masts if the rating is same and masts are located nearby. Otherwise the power tool can be built-in type and masts are located nearby.With siutable foundation for 16m high mast pole shallow foundation and iron barricading to resist the any unfortunate hit of vehicles and all other connection and all other charges for Laying of suitable cable for TNEB service connection and all other necessary work to relating the installation of high mast light

SWATHI CONSTRUCTION