KXJ_ KRRD_SOPD(G) _18-19_05

Amount

Dismantling of existing structures like culverts bridges, retaining walls and other structure comprosing of masonary, cement concrete , wood work, steel work including T & P and scsffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials and stacking the serviceable materials with all lifts and lead of 1000m as per Technical specification clause 202 I (c) reinforced cement concrete

Excavation in soil using hydraulic excavator and tipper with disposal up to 1000m. Excavation in roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with a lift up to 1.5 m and lead up to 1000m as per technical clause 302.3

Construction of embankment with materials obtained from roadway cutting construction of embankment with approval materials deposited at site from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with initial lead up to 3.0 km transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 with lead up to 1000m as per technical specification 301.5 i) private land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density ( with an initial lead of 5.0 km. ) B. By Mechanical Means 2) Grading –III (b) Using Screening Type-B (11.2mm Agg.)

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage. Including Edge block/ Edge restraints

Construction of unlined surface drains of average cross sectional area 0.40 sqm in ordinary rock to specified lines & grade etc as per approved design & technical specification Clause 307

Cross Drainage Works (1000mm dia NP3 Pipe): Earthwork in excavation for structures as per drawing and technical specification Cl 305.1 including setting out , construction of shoring and bracing , removal of stumps and other deleterious materials and disposal upto a lead of 50 m dressing of sides and bottom and back filling in trenches with excavated materials , Ordinary Soil i) upto 3m depth

Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 803, 1202 & 1203 (PCC Grade M10) i) Nominal Mix a:3:6 (hand mix)

Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204 PCC M15

Providing cement concrete for plain/reinforcement concrete in substructure complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204, PCC M15

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B) 1000 mm dia

Plastering with cement mortar (1:4) , 15 mm thick on brick work in substructure as per drawing and technical specification

3X3 M BOX CELL CULVERT:- Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side .Ordinary soil upto 3 m depth

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix 1:3:6 [Hand Mixing]

Providing concrete for plain / reinforced concrete in foundations complete as per drawings and technical specifications Clauses 802, 803, 1202 & 1203 PCC Grade M 20 Nominial mix (1:2:4)

Providing concrete for plain / reinforced concrete in substructure complete as per drawings and technical specifications Clauses 802, 804, 805, 806, 1202 & 1204 PCC Grade M 20 Nominial mix (1:2:4)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5. R.C.C grade M 20 For design mix RCC M 20

Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11

Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause 802, 803, & 1203 IV) R.C.C.grade M 20

Construction of toe walls for protection of slopes as per drawing and technical specifications Clause 1302.5 Random rubble masonry in case of stone pitching laid with cement mortar (1:5)

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand filling

Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surfacing mixing by mixing in place method with rotator at OMC and compacting with smooth whelled roller to achieve the desired density

Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of thelower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

RATNADEEP DAS PURKAYASTHA