Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.6 LAccepted-AOC SKALZANGLING AIR PORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹79.9 L+₹13.4 L (20.1%)Rejected-AOC | L2 | Rejected-AOC R |
Tender Value
₹66.3 L
EMD Value
₹1.2 L
Closing Date
13 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) LEH
CWE (AF) LEh
IMPROVEMENT OF EXISTING ACRR AT AIR FORCE STATION LEH
2023_MES_588927_2
81149/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) LEH
As per tender documents
7 documents required · 7 mandatory
₹1,000
GE
₹1.2 L
Yes
27 Jul 2023
17 Jun 2023
15 Jul 2023
17 Jun 2023
13 Jul 2023
24 Jun 2023
Amount
PART-I B/R WORKS Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in all kinds of soil as directed complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5m but not exceeding 3.0m in depth,1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in all kinds of soil as directed complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in hard rock as directed complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5m but not exceeding 3.0m in depth,1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in hard rock as directed complete all as specified and directed.
Labour only, for collection and stacking of stone boulder of any size/dia, complete all as specified and directed.(Measurement shall be taken after deduction of voids)
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.
Excavation in over area not exceeding 1.5m in and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.
Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.
Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.
Material and labour, Plain Cement Concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.
Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat, rough finished surface, complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed.
Use and waste of formwork to faces of wall, retaining wall, abutments, parapets and staircase railing etc , complete all as specified and directed.
Use and waste of formwork to staircase with sloping or stepped soffits including risers and stringers but excluding landing etc , complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 10mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.
Supply and fix in position, mild steel bars TMT, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in staircase sloping or stepped including steps but excluding landings, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.
Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and reammed including watering complete all as specified and directed.
Material and labour, hardcore of broken stone or boulders of guage n exc. 63 mm, deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.
Material and labour, hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.
Material and labour, 150mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.
Material and labour, 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.
Material and labour, 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in flooring, complete all as specified and directed.
Material and labour, cement concrete (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in coping, benching etc complete all as specified and directed.
Material and labour, sand filling under floor, foundation etc including watering and consolidation complete all as specified and directed.
Material and labour,for machine pressed precast concrete interlocking paver block any shape and size confirming to IS: 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment fixed over and including 50mm thick sand cushioning , complete all as specified and directed.
Material and labour, first quality non-skid coloured ceramic tiles 7 - 8mm thick, area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, in floors etc. set and jointed in neat cement slurry @ 3kg/sqm over and including 20mm thick screed bed/bedding layer in cement mortar (1:4), and pointed in white cement mixed with pigment or coloured cement to match, complete all as specified and directed.
Material and labour, first quality glazed ceramic designer pattern coloured tiles 350mmx250mm x 7mm/ 450mmx350mm x 7mm thick in vertical surfaces as in dado, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles (fixed in pattern of combination of dark and light colour with border), over and including 10mm thick rendering in CM (1:3) as backing coat, finished fair and even to receive tiles, complete all as specified and directed.
Material and labour, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar. set and jointed in neat cement slurry @ 3kg/sqm over and including 20mm thick screed bed/bedding layer in cement mortar (1:4), and pointed in white cement mixed with pigment or coloured cement to match, complete all as specified and directed.
Material and labour for perlaminated wooden boarding of size: 1.225m x 0.169m x 12mm thick as in flooring, colour and shade as approved by GE and laid on the levelled floor with approved adhesives over supreme profile polyurathene sheets as per manufacturer instructions over 150micron polythene film all as specified and directed.
Material and labour, plain cement concrete (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Material and labour, Clean sawn Second class soft-wood in scantlings, complete all as specified and directed.
Material and labour, Second class soft-wood Plain fillets. square, rectangular or triangular in section, of area exceeding 13Sqcm but not exceeding 25 Sqcm clean sawn, secured with nails or brads, complete all as specified and directed.
Material and labour, Second class soft-wood Plain fillets. but bullnosed, splayed, chamfered or rounded on one edge or facesquare, rectangular or triangular in section, of area exceeding 3Sqcm but not exceeding 6 Sqcm clean sawn, secured with nails or brads, complete all as specified and directed.
Supply and fixing 40mm thick Bonded mineral wool blankets slab made from rock, density 48 kg/cum and fixed as per manufacturer’s instructions, one side of blanket/slab is covered with polythene based jute hessian cloth' complete all as specified and directed.
Supply and fixing 16mm thick particle board for insulation purpose, , fixed with screws to timber frame work, complete all as specified and directed.
Supply and fixing 12mm thick Perforated particle board tile for insulation and acoustic purpose 600mm x 600mm in size, fixed with screws to timber frame work , complete all as specified and directed.
Material and labour, Acoustic door of 56mm achieving sound reduction of upto 50 STC, double layer of 8mm water proof Acoustic ply with dampner sheet and double layer of 10mm compressed insulation and single layer of sound dampner 1218x1218x12mm made of 10mm compressed wood cement composite 125oKg/Cum and 2mm dampner sheet having 37 STC as per ISO 140 (part-III) 1995 door frame should be made from teak wood, Three side frame and drop seal shall be provided along with the door with high load bearing hinges , complete all as specified and directed.
Supply and fix, pressed steel frames for doors with one rebate, size of frame 105mmx60mm, including necessary fixing lugs, hinges, lock strick plate, etc, including PCC 1:2:4 type B-0 filling in, complete all as specified and directed.
Supply and fix, 35mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Supply and fixing , Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, complete all as specified and directed.
Supply and fixing in the frame at site, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.
Supply and fix, UPVC Ventilator of size 0.9mx0.4m with frame and shutter , complete all as specified and directed.
Supply & fixing, double insulated toughened glass units gas fills(5mm+10mm gap +5mm) for fixing in UPVC Ventilator, complete all as specified and directed.
Supply and fix, Aluminium handle,150mm size, fabricated type, anodised, complete all as specified and directed.
Supply and fix, Barrel tower bolts 150mm long, aluminium anodised, of extruded section and fixed, complete all as specified and directed.
Supply and fix, butt hinges, mild steel medium weight, with chromium plated brass screws, 100mm size, ISI marked, complete all as specified and directed.
Supply and fix, sliding door bolts 250mm long, of extruded sections aluminum alloy, anodized, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminum, dia of bolt 12mm, complete all as specified and directed.
Material and labour, rendering 15mm thick plaster in cement mortar (1:4),mixed with WPC as per manufacturer's instruction on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid seperately under supply only.
Supply only water proofing compound, complete all as specified and directed.
Material and labour, rendering 15mm thick plaster in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour, rendering 5mm thick in CM (1:3) as on ceiling, soffits of beams, chajjas, etc, finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour, two coats of cement base cement base paint over a coat of alkali resistant primer including preparation of plastered/ concrete surfaces, complete all as specified and directed.
Material and labour, for two coat of dry distemper over a coat of white wash incl preparation of newly plastered wall surfaces complete all as specified and directed.
Material and labour, preparation of newly plastered sufaces of wall and applying three coats of white wash, complete all as specified and as directed.
Material and labour, preparation of newly plastered sufaces of ceiling and applying three coats of white wash, complete all as specified and as directed.
Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including one coat of pink primer, complete all as specified and directed.
Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including red oxide primer, complete all as specified and directed.
Material and labour, water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.
Supply and fix, GI tubing 15mm bore medium grade with necessary GI fittings and fixed complete to wall, or laid under floors, or fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc, complete all as specified and directed.
Supply and fixing, 10 ltrs capacity, PVC valveless, symphonic type flushing cistern, Iow level, white, with inlet, ball valve, float and handie including brackets and provision of Flush or high density or PVC ,32mm dia for low level cistern pipe of polythene complete all as specified and directed.
Supply and fixing, Vitreous China wash down water closet pan (pedestal pattern) white including seat cover closed type complete all as specified and directed.
Supply and fix , Vitreous china wash basin, white,fiat back, size 550 X 450 mm including PVC waste pipe 32 mm dia with waste fitting brass chromium plated with long screwed shanks and fly nuts, PVC connection 300mm long,complete all as specified and directed.
Supply and fix, fancy type Pillar tap, cast copper alloy, chromium plated, with capstan head, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm dia bore, complete all as specified and directed.
Supply & fix PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, complete all as specified and directed.
Supply and fix, bib taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, complete all as specified and directed.
Supply and fix, stop valves, fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore iron pipe or for brass ferrulee complete all as specified and directed.
Supply and fix, chromium plated dish weight not less than 125gm, complete all as specified and directed.
Supply and fix, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges with and including screws complete all as specified and directed.
Supply and fix, Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx420mm with bowl size 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm, complete all as specified directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500litres capacity ‘triple layered’, white colour with screwable lid, hoisted and fixed in position including inlet, outlet and drain pipe with plug, ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000litres capacity ‘triple layered’, white colour with screwable lid, hoisted and fixed in position including inlet, outlet and drain pipe with plug, ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.
Supply and fix , 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement , complete all as specified and directed.
Supply and fix , Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) , complete all as specified and directed.
Material and labour, PVC(SWR) pipes 110mm dia, single socked, in any length with rubber ring laid in trenches, complete all as specified and directed.
Material and labour, PVC(SWR) pipes 75mm dia, single socked, in any length with rubber ring laid in trenches, complete all as specified and directed.
Supply and fixr, 110mm dia PVC (SWR) bend of any radius with access door, complete all as specified and directed.
Supply and fixr, 75mm dia PVC (SWR) bend of any radius with access door, complete all as specified and directed.
Material and labour, Low density polyethylene (LDPE)waste pipes of 32mm bore pressure rating 6 kgf/sq. cm complete all as specified and directed.
Material and labour, concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) type C-2, size of pipe 150mm dia bore, complete all as specified and directed.
Material and labour, 150mm dia bore salt glazed stone ware(SGSW) grade'A' drain pipe,laid in trenches and jointed on concrete bed including testing complete all as specified and directed.
Material and labour, precast reinforced cement concrete M-30 (Design mix) using 20mm graded crushed stone aggregate as in cover slabs of manholes/drains including use and waste necessary form work, and fixing lifting hooks, and necessary angle iron frame work, complete all as specified and directed. Note: Steel reinforcement bars and lifting hooks shall be measured and paid separately.
Construction of soakage well, of size 2.40 m diax3.00m deep stone masonry construction, earth work in hard dense soil PCC in Foundation in 1:3: 6 type C-2, complete all as specified and shown in drawing No CE (AF) U/STD/15/2000 sheet No 1/2 and as directed by Engr-in-charge.
PART-II E/M WORKS Material and labour, point wiring complete with two single core multi stranded Copper conductor size 1.5Sqmm (nominal area) FRLS PVC insulated unsheathed 1100volts grade colour code cable, drawn in and including non metalic rigid PVC conduit medium grade of suitable size including all standard fittings such as Tee junction, bends etc, conduit concealed in wall & fixed on ceiling including M.S. sunken boxes of suitable size made of 1.6mm thick sheet duly epoxy painted with anti-corrosive treatment, for housing switches, sockets etc, PVC cover sheet 3mm thick (Make : Hylam, Plaza, Havells, Kalinga) including one 1.5Sqmm size (nominal area) multi stranded copper conductor FRLS PVC insulated unsheathed colour code cable for earth continuity, for one light/exhaust fan/bell point or fan point (through regulator), controlled by one switch, complete all as specified and directed.
All as per item No 95 here-in-above but for 05 Amp socket outlet on independent board
All as per item No 95 here-in-above but for 05 Amp socket on same board
All as per item No 95 here-in-above but using 4.0 sqmm wire for phase neutral and 2.5 sqmm wire for earth for 15 Amps independent socket outlet
Supply and fix, socket outlet two-in-one, three pin 6 and 16Amp, flush type 230 volts complete all as specified and directed .
Supply and fix, socket outlet two-in-one, three pin 6 Amp, flush type 230 volts complete all as specified and directed .
Supply and fix, LED adore lamp 9/10Watt, B22 base 6500k CDL typecomplete all as specified and directed
Supply and fix, Crystal glass LED tube light of 18W T8 , 2700 k ,4ft. (double side connection with LED driver) with very high efficency suited for installation in existing tubelight G13 lamp holders to give glare free light complete all as specified and directed
Supply and fix, Switch piano, flush type 5 Amps, one way 230 volts complete all as specified and direcred.
Supply and fix, Switch piano, flush type 15 Amps, one way 230 volts complete all as specified and direcred.
Supply and fix, ceiling rose Bakelite white/black coloured of size 25x50mm two to three terminals, complete all as specified and as directed.
Supply and fix, Lamp holder insulated bodywith back plate for batten fitting suitable for LED lamp complete all as specified and directed
Supply and fix, Energy saving new generation Endura Rugby Neo - IP65, 10W LED IP65 bulkhead luminaire with opal diffuser, etc complete with all accessories rewired electrically connected in and including taking down of old unservicable fitting, complete all as specified and direcred.
Supply and fix, Distribution box Double door type , SPN 8 way,with 200 Amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door ,epoxy powder coating and including taking down of old unservicable main switches /Distribution board including fuses MCBs after removing all connection and making good the disturb surfaces complete all as specified and directed
Supply and fix, MCB SPN 32 Amp, 240 volt-10KA complete all as specified and directed
Supply and fix, MCB SP 6 to 32 Amp, 240 volt-10KA complete all as specified and directed
Supply and fix, 40mm bore Steel water tubing medium grade galvanised ( ISI marked) with all fittings( such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc), complete all as specified and directed.
Supply and fix gun metal, gate valves of 40mm dia , with iron wheel head, screwed both ends for GI pipecomplete all as specified and directed.
Supply and fix, Single Pole and Neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed
Material and labour, sub main wiring with two single core 6Sqmm (nominal area) PVC insulated and unsheathed cables with stranded copper conductor FRLS, drawn in and including PVC cassing capping with all standard accessories including one run of continuous PVC insulated stranded copper conductor FRLS cable 6Sqmm (nominal area) for earth continuity, complete all as specified and directed. Note(s) :- 3Runs of 6Sqmm main cable and 01 run of cassing capping shall be measured as one unit/one Running Metre.
Supply, installing, testing and commissioning of energy efficient 5 star rated as per BEE air cooled, split unit Air Conditioner, all weather with heating and cooling , electric driven, with cordless remote control unit, single phase of capacity 2 Ton, including cutting holes for connections between indoor and outdoor unit with copper tubing, stand etc, and testing for leakage, suitable for CFC/HCFC refrigerent complete all as directed at site. Make : O,General, Mitshubishi, Blue Star
Supply, installing , testing and commissioning of Voltage Stabiliser copper wound for automatic operation , single phase, 50 c/s AC Supply naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 250 V with output voltage stabilised at 230 V with accuracy of ± 2.5% and of capacity 2 KVA Make : Vguard/ Microtec/Volina
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50Sqmm 3.50core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16Sqmm 4core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.
Supply and laying / fixing , GI pipe light grade 50mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed. Note (s) : (i) MS clamps, nuts, bolts etc where required shall be measured and paid separately. (ii) Cutting road etc. shall be measured and paid separately.
Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick burried directly in ground (Earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected and including GI strip 32 mmx6mm (upto the body of equipment) by means of brazing, GI bolts, nuts, check nuts and washers, earth plates surrounded by packed layers of coal dust and common salt 15 cm thick all around top and bottom and watering pipe 20 mm bore of GI pipe, light grade all as shown in Electrical plate No 5 of SSR Part I, testing on completion including PCC 1:2:4 tye B1 using 20mm graded stone aggregate as in pit cover and PCC chamber in PCC 1:3:6 type C-1 using 20mm graded stone aggregate including excavation and earth work, disposal of surplus spoil to a distance n exc 50 m , complete all as specified and directed.
Material and labour, Earthing complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to G I earth strip of 4mm dia G I wire by means of brass bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, pit cover of precast RCC (1:2:4), type B-1, reinforced XPM of weight not less than 4 kg/ Sq.m and MS frame etc. including taking down of old unserviceable earthing, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from earth.
Supply install, test and commissioning LT Feeder Pillar / Panel board cubical type outdoor Confirming to IS 8623 Part 1 1993, free floor standing / wall mounting factory fabricated made out of 3.15 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and Outgoing MCCB, MCB and TPN Aluminum bus bars of rating not less 1.5 times the rated cap of incomer Outgoing MCCB / ACB and outgoing feeder. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator of size not less than 50 x 50 mm conical type at an interval of not more than 500 mm through out the length of the TPN bus bar . The incoming as well as outgoing O MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC / Epoxy insulators having provision for termination of incoming and outgoing cables. All extension links /interconnection shall be insulated with heat shrinkable colour coded sleeves. The cubicle shall have a bottom channel of size as designed by the manufacturer . A detachable predrilled gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front and back openable lockable /openable by key from both side and shall have louvers and air vent gasket for natural flow of air.3 mm XLPE adhesive type gasket shall be used to make panel weather, dust and vermin proof with IP65 degree of protection , complete as specified and consisting the following switchgears and accessories: (a) Bus bar electrolytic grade aluminum strip with heat shrikable sleeves with colour code supported on epoxy resin based insulators, 4 strips of suitable length for current rating 250 amps. (b) Main Incoming MCCB four pole 415 V AC, current rating 100 amps, breaking cap 25 KA at 415 volts (c) Outgoing MCCB four pole 415 V AC, current rating 63 amps,breaking cap 25 KA at 415 V AC = 03Nos (d) LED Multifunction meter flush panel mounting 96x96 mm,having parameters such as V,A,F,PF, KW,KVA, KVAR, KWH, KVAR, neutral currant, (e) LED indicator (R,Y,B) of suitable capacity (f)Complete wiring of the panel board with FRLS PVC insulated multistrand copper conductor cables of suitable current carrying capacity, end terminated with lugs and bolts, nuts and washers of galvanised iron .(g) Current transformer (Bar primary low tension) type CBF-0.6-D1 Ratio 300/5 amps, 15 VA accuracy class - 1 (h) Installing,commissioning ,testing,earth work PCC etc.
M/S RIGDOL CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .