REPAIRS TO DRAIN MANHOLE FENCINGAND GAE HARDSTANDING PLINTH PROTECTION AND CLEANING OF SEWAGE LINE MANHOLE SEPTIC TANKS ETC AT NABAGRAM MIL STN UNDER GE (P) PANAGARH

Amount

Demolition of brick works/stone masonry work built in cement mortar including all quions, arches, pillars etc all as specified & directed.

M&L for brick work sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) all as specified & directed.

All as per item No 2 above but except brick all as specified & directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick walls built in cement mortar (1:4) all as specified & directed.

M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregete as in surface channel or drain all as specified & directed.

M&L PCC (1:3:6) type C-2(40 mm graded stone aggregate) in foudations,filling and mass concrete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc all as specified & directed.

Add or deduct for item No 9 for each 25mm girth or part thereof over or under 30 cm ditto all as specified & directed.

M&L applying two coat of cement base paint with priming coat incl preparation new plastered surface all as specified and directed

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key and scrubing down with water etc all as specified & directed.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base concrete all as specified & directed.

M&L for PCC 1:2:4 type B1using 20mm graded stone aggregate as in coping, benching etc incl necessary form works etc all as specified & directed.

M&L Precast cement concrete solid block kerb stone of PCC 1:2:4 type BI ussing 20 mm graded stone agg. Including weathring or chamferd Angles etc.and setting in CM. (1:6) all as specified & directed.

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment all as specified & directed.

M/L sand cushoning including watering and consolidation and all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, finishing surface even and smooth by using extra cement all as specified and as directed.

M&L for 50mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in paving finished fair and even complete all as specified and as directed.

M&L for PCC (1:2:4) Type B1, 100mm thick using 20mm graded stone aggregate, concrete surface furnished evern and smooth without using extra cement as in flooring all as specified & directed.

Forming contraction (dummy) joints 65 mm deep x 100mm wide filled with sealing compound grade A all as specified & directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed gound all as specified & directed.

Excn in post holes ( or similar holes) in soft/loose soil each n exc 0.50 cum getting out returning filling in and ramming all as specified & directed.

M&L for providing reinforced cement concrete type B1, (1:2:4) (20mm graded stone agg) in pre cast fencing posts, straining or terminal posts, struts etc. for fencing average sectional area n exc 100 Sqcm with or without chamfered angles and flat, splayed, rounded or mitered tops as directed and fixed all as specified & directed.

M&L Cement concrete type C-2 (1:3:6) (40mm graded stone agg) in fdn filling and mass concrete as far fixing angle irons as in fencing posts all as specified & directed.

M&L mild steel work for posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc, flat iron fillets for recuring wire mesh, nosing to steps, hand rails, blalusters etc all as specified & directed.

S&F mild steel screw bolts 5 to 10 mm dia machine made with hexagonal or squar heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm but n exc 10 cm long all as specified & directed.

Dismantling of chain link fencing of any description any type not other wise describe for all as specified & directed.

M&L TMT steel bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified & directed.

M&L TMT bars 6 to 8mm dia as in reinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for chain link fencing columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified & directed.

All as per item No 31 above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified & directed.

Supply only chain link MS galvanised fencing any size or type all as specified & directed.

Fixing only chain link fencing including line wires, any mesh size and type of standard, rails, straining bolts, etc including provision of binding wire all as specified & directed.

M&L for preparation of surface of steel and iron of any description over 10 cm width or girth, not oterwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chcome primer complete all as specified and directed.

M&L for preparation of old surface of concrete of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primere complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. all as specified & directed.(each line wire to be measured)

Taking down the existing steel window shutters for carrying out repair i.e replacements of unserviceable steel hinges and refixed in position complete including loosening/tightening of hinges and greasing the top and bottom hinges complete and ensure smooth function inclding making good the disturbed surface to match with the existing specifications all as specified and directed.

Dismantling of wrought iron or mild steel works of any description net other wise provided for etc all as specified & directed.

S&F mild steel framework as in grills, gates steel door's etc with ends of bars houlderd or revited or forged in to spikes, etc and similer works confirming to FE 290 Gole E 165 etc all as specified & directed.

Demolition concrete of any description and in any position not other wise specifically provided for(cement concrete is reinfoced (reinforcement cut as required to facilitate demolition) all as specified & directed.

M&L 75mm thick PCC M-10 (1:3:6) type (using 40 mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block 20 mm thick with cement mortar (1:6) complete all as specified and directed.

M&L PCC (1:2:4) type B1 (using 12.5 mm graded aggregate) 25 mm thick as in flooring all as specified and directed. .

Refixing of interlocking tile 60mm thick including sand cusing and taking down complete all as specified & directed.

M&L Providing precast cement concrete louvres and jallies, ttype B0 using 12.50mm graded stone aggregate, 35mm thick set in cement mortar 1:4 (measured solid), including all mould- ings but excluding frame (Precast frame shall be measured & paid separately all as specified & directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided all as specified & directed.

RCC(1:2:4) type B1 (using 20mm graded stone agg) as in beam & lintels complete all as specified & directed.

M & L 150mm thick cement concrete work in pavement/hard standing of flexural strenth 40kg/per Sqcm in field using, 400Kg of cement per Cum, complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 20mm screed bed in CM(1:6) complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n. exc 1.5m depth for foundation of pipes and getting out in hard/dense soil all as specified directed.

All as per item No 51 but in soft/disintegrated rock (cutting of road, bitumen/WBM/soling etc) all as specified & directed.

M&L PCC (1:2:4) type B1 (20mm graded stone aggregate) as in roof kerbs rounded or chamfered on edges, all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm in soils all as specified and directed.

Cleaning of sewage line of 150 mm bore of pipe lines in foul conditions by rodding from man hole to manhole removing the sludge from sewage lines, man holes also and flushing water and cleaning the blockage of line (work to be carried out as in foul condition) all as directed by Engr-in-Charge.

As per item No 55 above, but 200 mm bore of pipe

Cleaning of septic tank and manhole by removing the cover of man hole and septic tank and taking out sludge, night soil including water by bucket from septic tank and buried in the ground after digging earthpit of size 2mx2mx2m and covered with earth not less than 300mm thick after adding with blaching powder @ 1kg/sqm of surface area of earth pit all as specified & directed.

Demolition and breaking 150 mm bore of drain pipes (salt glazed stone ware) set in cement mortar) including demolition of PCC bed and hunching to drain pipes for filling sizes all as specified & directed.

All as per item No 58 above but 200 mm bore of pipe

M&L for plain cement concrete (1:4:8) type D2 (40 mm graded stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe all as specified and directed.

All as per item No 60 here in before but bore of pipe 200mm dia all as specified & directed.

Reinforced concrete pipes class NP2 , laid and jointed complete with collars 150mm bore all as specified & directed.

Reinforced concrete pipes class NP2 , laid and jointed complete with collars 200mm bore all as specified & directed.

Cleaning and repairing of gully trap by removing the cover and taking out sludge etc from gully trap all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed.

M&L rendering 15mm thick on brick surfce in CM (1:4) finished even and smooth without using extra cement including WPC @ 3% by weight of cement all as specified and directed. Note : supply only Water proofing compound will be measured and paid for separately.

Supply only Integral waterproofing compound all as specified and directed

M&L for pre-cast cement concrete (1:2:4) type B1 ( 20mm graded stone aggregate) for man hole and drain cover slab and set in CM 1:4 including demolition of existing concrete cover slabs all as specified and directed.

Taking down unserviceable CI waste pipes 100mm bore from walls all as specified & directed.

S&F cast iron waste pipe 100mm dia sand cast pipe in any length with or without ears with cement joints fixed to walls including taking down unserviceable pipe all as specified and directed.

S&F CI 100 mm bore bends (any radius) diminishing pieces ord tapers (larger bore measured) all as specified & directed.

S& F cast iron single 'Y' junctions for 100mm bore pipe laid and jointed, complete all as specified & directed.

S & F cast iron cowls 100 mm dia all as specified & directed.

M&L Cutting into existing 150 mm bore of manholes pipes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all as specified & directed.

All as per item 74 above in before but 200 mm bore of pipe

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming toFe-290 Gde E-165 ® all as specified & directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of Zinc chrome primer.

NOTE for item No 01 to 07: In case of doubling/duplicacy of items, lowest quoted rates shall be taken in to account for measurements & payment

SCHEDULE OF CREDIT

ANSH CONSTRUCTION