Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹35.0 L+₹2.6 L (7.89%)Rejected-Finance | L2 | Rejected-Finance Higher Bidder | |
| 3 | L3₹37.0 L+₹4.5 L (14.0%)Rejected-Finance | L3 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
13 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt
CWE/FZR-33/2023-24 CERTAIN REPAIR AND PERIODICAL SERVICES IN MD ACCN E AND F ZONE, SATLUJ ENCLAVE AND CERTAIN REPAIR IN ASSAL UTTAR ENCLAVE UNDER AGEB/R I OF GE(WEST) FEROZEPUR CANTT
2023_MES_631947_1
CWE/FZR-33/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(West) Ferozepur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE(West) Ferozepur Cantt
₹1.0 L
21 Feb 2024
9 Dec 2023
22 Jan 2024
9 Dec 2023
13 Jan 2024
1 Jan 2024
Amount
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in-Charge..
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exc 2 sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge.
All as per item no 6 above here-in-before but size 125x60mm with double rebate complete all as specified and as directed by Engineer-in-Charge.
All as per item no 6 here-in-before but size 75x50mm with single rebate.
All as per item no 6 above here-in-before but size 165x60mm with double rebate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 40mm thick Flush door shutters,solid core construction,with particle board core and plywood face panels,commercial type,both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
Material and labour PCC (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ metre including necessary joining cleats, glazing clips, rubber nafron packing, handles 02 Nos in each doors, hinges, anodised aluminium snap bidding screws etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Anodised aluminum window and ventilator shutter shutters,side hung type without sash bars, aluminium section weighing 0.55 Kg/ meter including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beadings,screws,anodised aluminium fittings such as peg stays 150mm long(1 no), hinges type B-21 100 mm long(2 nos) suitable handle (1 no) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and as directed by Engineer-in-Charge.
Hacking out old broken glass(any thickness,size quality or description) from wooden or metal frame including punching or drilling out old glazing in/spring clips and providing and fixing new one complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 4mm thick sheet glass ordinary quality,glass is ground or obscured or frosted,on one side and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-Chargee.
Supply and fixing 150mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 125mm Extruded aluminium alloy handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150mm Extruded aluminium alloy handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 125mm in repair Extruded aluminium alloy handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150mm in repair Extruded aluminium alloy handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 100mm size Butt hinges,medium weight,cold rolled mild steel as fixed in repairs all as specified and directed.
Supply and fixing PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repair complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed by Engineer-in-Charge.
Dismantling wrought iron/mild steel work in any position complete all as specified and as directed by Engineer-in-Charge
Supply and fixing mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Forming jambs etc built in cement mortar 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engineer-in-Charge
Material and labour 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge Note:- WPC shall be measured and paid separately.
Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified and as directed by Engineer-in-Charge.
Material and labour PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion complete all as specified and as directed by Engineer-in-Charge.
Material and labour 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified and as directed by Engineer-in-Charge
Supply only water proofing compound.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and as directed by Engineer-in-Charge.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.Note:-Demolition of mud phuska to be cut in avg thickness from top surface of roof for create the slope as directed by Engineer-in-Charge.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
Removing mud phuska/soil material exc.250 m but n exc. 500 m and depositing where directed complete all as specified and as directed by Engineer-in-Charge.
Material and labour Cement concrete type B-1,1:2:4(20mm graded aggregate),50mm avg thickness as in roof padding complete all as specified and as directed by Engineer-in-Charge by Engineer-in-Charge.
Material and labour for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and as directed by Engineer-in-Charge
Material and labour applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and as directed by Engineer-in-Charge Note: WPC shall be measured and paid separately
Supply only water proofing compound.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified and as directed by Engineer-in-Charge.
Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and as directed by Engineer-in-Charge.
All as item No 69 here in before but except tiles
Material and labour for prepration of roof surface and applying two coats of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and as directed by Engineer-in-Charge by Engr-in-Charge.
Material and labour Covet fillet in Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified and as directed by Engineer-in-Charge.
Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and as directed by Engineer-in-Charge by Engineer in Charge
Material and labour Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour 60mm thick Coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE. Complete all as speciifed and directed.
Material and labour for fine sand bed under paver block, complete all as directed by Engr-in-charge.
Material and labour for 75mm tk Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors finishes complete all as specified and as directed by Engineer-in-Charge
Material and labour Plain cement concrete 1:2:4 type B -1 all around the interlocking tiles to fix in position as in kerbs complete all as specified and as directed by Engineer-in-Charge by Engr-in-charge
Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed by Engineer-in-Charge.
All as per item 81 above here-in-before but using old bricks retrieved from demolition under item 80 here in before including cleaning and removal of mortar from old bricks.
Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and as directed by Engineer-in-Charge.
Material and labour for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.
Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.
Material and labour for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for glazed coloured ceramic tiles of size 300x200x6.5mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for glazed coloured designer ceramic tiles of size 450x350x6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge by Engr-in-Charge.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar
Material and labour for 16-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and as directed by Engineer-in-Charge.
Material and labour Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.
Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 92.
Supply and fixing galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge and as directed by Engr-in-Charge.
Supply and fixing galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge and as directed by Engr-in-Charge.
Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.
All as per item No.100 here in before but 20mm dia.
Demolition of boarding of any description and in any position complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing prelaminated particle board of 18/19 mm thick oneside decorative face of exterior grade as in wardrobe and cupboard shutters and shelves etc. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 30mm width of flaps of continuous Piano hinges mild steel bright finish or electrogalvanised.
Supply and fixing Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 100mm size, Extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 40mm thick cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in floor finishes with surfaces finished even and smooth without extra cement complete all as directed by Engr-in-Charge and as specified.
Supply only 38mmx1.5mm thick Plastic dividing strips as in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing brass CP stop cock with long shank and cup (concealed type) 15mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs.
Supply and fixing in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.
Supply and fixing in repair, 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply & fixed as in repair of plastic water closet seat cover coloured pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge.
Supply & fixed in repairs PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs Health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge.
Supply and fixing Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC Connection pipe, 600mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing CP grating 125mm size of dia with or without wate hole fixed in repairs complete all as specified and as directed by Engineer-in-Charge
Supply and fixing brass CP 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Corner glass shelves 300 mm radius, 8mm thick as per sample radius for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Brass chromium plated bottle trap 32mm dia for wash basins with inlet or outlet screwed for pipe or connections including necessary packing,union,cap and fixing in repai complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 32mm dia waste coupling fittings brass chromium plated for steel sinks/wash hand basin etc, full or half threaded complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing CP Soap dish Oval /squaretype as fixed in repairs complete all as specified and as directed by Engineer-in-Charge
Supply and fixing stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 1.00mm thick stainless steel plate racks of size 750X600X250 mm complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified and as directed by Engineer-in-Charge
Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm bore, PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm bore, PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair CP central hole basin mixer for wash hand basin including all fittings i.e including connection pipe as per manufaturers specification complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair CP fancy type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed complete all as directed by Engineer-in-Charge
Material and labour Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices complete all as specified and as directed by Engineer-in-Charge.
Material and labour for washing, rubbing down and stopping of distempered and painted surfaces and apply one coat of oil bound distemper all as specified.
Material and labour for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and as directed by Engineer-in-Charge.
Material and labour Complete Removal of existing treatment of walls applying two coats of cement based paint on plastered surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour washing rubbing down and stopping of Cement based painted surface and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches/bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for one light/fan/Bell Point controlled by one single pole one way 6Amp switch.
All as per item No 163 but for one 3 pin socket outlet 6 Amp on the same board controlled by one single pole one way 6 Amp switch complete all as specified and as directed by Engineer-in-Charge.
All as per item No 163 but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch complete all as specified and as directed by Engineer-in-Charge.
All as per item No 163 but for one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed by Engineer-in-Charge.
All as per item No 163 but existing conduit and existing MS pressed steel/cast iron box for one light/fan/Bell Point controlled by one single pole one way 6 Amp switch complete all as specified and as directed by Engineer-in-Charge.
All as per item No 165 but existing conduit and existing MS pressed steel/cast iron box complete all as specified and as directed by Engineer-in-Charge.
All as per item No 166 but existing conduit and existing MS pressed steel/cast iron box complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type 6 amps, one way complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Switch piano flush type 16 amps, one way complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular switch one way 6 A , 1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular switch one way 16 A , 1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular socket,6A -2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular socket,6A/16A -2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,3 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,4 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,6 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular white cover plate including GI box inner,8 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular bell push ,1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair modular step type regulator,120 W , 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair stepped type electronic fan regulator (socket/switch type),flush type on the existing phenolic laminated sheet as required complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair bell push piano flush type 5 Amps single pole complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair bell AC 230 volts single pole complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair white/warm 9 watt LED bulb suitable for normal lamp holder complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick with metallic painting white series TPN DBs (vertical type) fitted with ABS frame and 415 volts 200 Amps rated enamelled bus bar 4 way dust and vermin proof suitable for incorpration of MCBs duly concealed in wall and making good disturbed surfaces and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 193 above but SPN DBs 4 way.
Supply and fixing LED light fitting 1 x 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 V,complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED light fitting 9 watts batten type fixed on wall/ceiling etc including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED luminaire 600mm x 600mm.35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair MCB single pole (SP) 240 volts, 6-32 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCB TPN 415 volts 63 Amps,10 KA complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing MCCB 4 pole,415 volts,63 Amps,16 KA,50 Hz complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 volts grade with standed copper conductor complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair 2.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 volts grade with standed copper conductor complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC sunken box rectangular block for mounting normal/modular switches, sockets,fan regulator etc of size 100mm x 100mm x 50 mm complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 206 above but of size 175 mmx 110mm x50 mm
Supply and fixing sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and as directed by Engineer-in-Charge. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length)
Ditto all as per item No 208 above but 4 sqmm submain wiring
Supply and fixing in repair 1100 volts grade heavy duty 6 sqmm two core cable PVC insulated aluminium stranded conductor, served with inner shething of PVC sheathed in service connection suspended by insulating hangers and procelean beat not more than 1 mtr apart including 4 sqmm suspension wire , one twin core cable flat or circular. complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 210 above but 10 sqmm 2 core.
Ditto all as per item No 210 above but 16 sqmm 2 core.
Supply and fixing in repair LED driver for LED security light upto 45 W including all connection and suitable size of copper wire complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Decorative gate light made up of high grade unbreakable polycarbonate material suitable for LED lamp (B22) Moon 200 base suitable for mounting pole dia 60 mm(max) OD. Dimension: width 200 mm & Height 227 mm for Moon 200 decorative gate light complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC casing/caping with accesoories of size 20 mm complete all as specified and as directed by Engineer-in-Charge. Note :- Nickel cadmium screws should be used for fixing of casing caping.
Supply and fixing in repair bakelite sheet hylam 3mm thick with MS pressed steel/cast iron sunken boxes alongwith white top fixed with cup washers with machine screws on existing switch board with including removing existing switch/switch sockets/bell push etc and refixing the same by making slots on new sheet for MS box of approx size 5"x5" etc complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per item No 216 above but of size 8"x5"
Ditto all as per item No 216 above but of size 9"x11"
Ditto all as per item No 216 above but of size 11"x13"
Supply and fixing capacitor 2.5 mfd complete all as specified and as directed by Engineer-in-Charge.
Material and labour for checking electrical point for continuous electric supply or broken neutral system and rectification of electrical defects and tightening of loose wiring circuit by using the sane size of wire, small pieces upto 1.00 mtr length and similar patty work complete all as specified and as directed by Engineer-in-Charge.
Material and labour for earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed by Engineer-in-Charge.
Dee Kay EnterPrises
M/s Manoj Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .