GE/BAS-67/2021-22 REPAIR TO JOINERY, FLOORING, SANITARY FITTINGS, ROOF ETC IN OFFRS MD ACCN AND CERTAIN MISC UNITS AT MADHOPUR MIL STN UNDER GE BASOLI.

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each, complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exc 2 Sqm each, complete all as specified and as directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra including taking down cement plaster complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles and Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes and Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes and Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes and Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Dismantling timber scantlings (un-framed) 40Sq cm and over in section in any position complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and as directed.

M&L for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W(Gde-E-250) quality, complete all as specified and as directed.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Aluminium anodised plated, fixed with rawl plugs, complete all as specified and as directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L "Steel window factory made double shutter and tubular moulded frame of 16gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer."including Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, in opening etc complete all as specified and directed

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

M & L 18/19 mm Prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F18 to 20 mm thick PVC board prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work, complete all as specified and directed.

M&L for factory made, 2nd class Hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick Factory made 2nd class Hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F only mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete all as specified and as directed.

S&F 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F in repair floor door stoper of Aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length 150 mm inculuding valcanised rubber piece, complete all as specified and as directed.

S&F in repair Aluminium (extruded section body)Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg, complete all as specified and as directed.

S&F 300 mm ordinary rat tail rod pattern spring including roller and roller plate (mild steel), complete all as specified and as directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L preparation of new surfaces of wall and applying two coat of cement base paint, complete all as specified and as directed.

M&L for applying two coats of oil bound distemper of any colour or tint over 3mm thick wall care putty on wall including roughning of surfaces including preparation of newly plastered surfaces of walls complete all as specified and as directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified.

M&L for preparing old white washed surfaces of ceiling (plastered or unplstered) for white washing and applying one coat of white wash complete all as specified.

M&L for preparing old surfaces of wall (plastered or unplstered) and applying Plastic emulsion paint over a coat of primer on walls complete all as specified.

M&L for one coat of cement base paint on old surfaces including preparation of surface, complete all as specified and as directed.

M&L for Complete removal of existing treatment of old surface of wall (plastered or un plastered) applying 3mm thick wall care putty for smooth finishing and Applying two coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed.

S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed by Engineer-in-Charge

S&F in repair water closet (Orissa pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified.

Supply only flush pipe of PVC 32 mm dia for low level cistern, complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal, bore of pipe 15mm complete all as specified and as directed.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm, complete all as specified and as directed.

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

S&F in repairs, Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and complete all as specified and as directed.

S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore and fixed in repairs, all as specified.

S&F Stop valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm all as specified.

S&F in repairs Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm complete all as specified and as directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore, complete all as specified and as directed.

S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, sand cast pipes including two coats of black Japan paint.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor,75mm dia, complete all as specified and as directed.

S&F 75 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured). 75mm dia, complete all as specified and as directed.

S&F cast iron trap 'P' or 'S' 100 mm, complete all as specified and as directed.

S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltr including dismantling of tank complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltr including dismantling water tank complete all as specified and as directed.

S&F in repair Brass CP mixer wall or sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&Fin repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.

S&F in repair PVC grating 100mm square/round of PTMT, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm including taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

S&F PVC(SWR) bends any radius of bore 110 mm, complete all as specified and as directed.

Supply and fix in position suspended false ceiling system using E-grid suspended ceiling grid system as specified .The size of grid shall be 600mmx600mm with GI frame work main runner 38mmx24mm cross tee 25mmx24mm and wall angle 24mmx24mm using 8 mm thick ceiling panel laminated with PVC film on front face and foil back available in due texture as per IS-2095 part I 1996 fixed in the grid of E grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from he purlin of the roof with butterly clips etc. including dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound including Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with non -woven polyester matt laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) Plain cement concrete padding 1:2:4 type B-0 of uniform thickness 50mm in two layer top surface of plain cement concrete padding shall be furnished even and smooth with out using extra cement, complete all as specified and as directed.

M & L Chequred cement concrete tiles 30 cm X 30 cm X 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15 mm thick screed bed of 1:4 cement mortar including 75 mm thick cement concrete type D-2 (1:4:8)( using 40mm graded stone aggregate) as in sub base,finished cement concrete surface fair & smooth without using extra cement, complete all as specified and directed.

S & F in repair chromium plated jet spray with connection pipe as required all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as directed.

S & F Fancy type Brass Chromium plated, soap dish, complete all as specified and directed.

S & F Three tier glass shelf assembly with brass frame of chrome matt finish, with all manufacturer’s accessories, all as specified and directed.

S & F natural colour anodized aluminium door frame of size 101.60X44.45X1.60mm of approved manufacturer, fixing to floor, wall with rawl plug and screws and fixing door shutter with frame or natural colour anodized aluminium including floor machine as approved , door handle tower bolt, hinges and glass pane not less than 5 mm thick coloured fixed with rubber gasket, beading /glazing clip of size 19.00 X 17.30X 0.70 mm (weight 0.097 kg /RM of both side) shutters with top, lock rail and vertical member of size 83.40X44.45X1.30 and bottom member of size 114.30X44.45X1.30mm, complete all as specified and as directed.

S & F natural colour anodized aluminium window frame of size 101.60X44.45X1.60mm of approved manufacturer, fixing to floor, wall with rawl plug and screws and fixing window shutter with frame or natural colour anodized aluminium including handle tower bolt, hinges and glass pane not less than 5 mm thick coloured fixed with rubber gasket and aluminium and aluminium grill as per manufacturer's design, beading/glazing clip of size 19.00 X 17.30X 0.70 mm (weight 0.097 kg /RM of both side) shutters with top, lock rail and vertical member of size 83.40X44.45X1.30 and bottom member of size 114.30X44.45X1.30mm, complete all as specified and as directed.

M&L for Durastone / Endura heavy duty vitrified tiles of size 322mm x 322mm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and 15mm thick cement screed bed or bedding layer in CM (1:4) complete all as specified and directed.

Supply & Fix PVC waste pipe suitable for wash hand basin/ kitchen sink/urinal etc complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair CP peg set of Six mild steel complete all as specified and as directed.

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm

S & F Magnetic catcher for cupboard all as specified and directed

S&F in Brass knobs 35-40mm dia all as specified and directed.

S & F drawer rooler channel with wheel all as specified and directed.

BALKRISHAN GUPTA AND SONS

Ms Narinder Kumar Sehgal

M/s. Jaswant Singh Govt Contractor