Open Air Gym Equipments

RBR-FNDN-1- (I-B-i) - In ordinary soils up to 3.00 Mts depth below GL by Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for drain work by Manual Means. For SITUP BOARD, ELLIPTICAL CROSS TRAINER, SKY WALKER, AIR WALKER, CHEST PRESS, LEG PRESS, TWISTER 3 IN ONE, CHEST PRESS CUM ARM PULLER, HORIZONTAL BARS, PULL UP BARS, 3 IN ONE AIR WALKERCUM LEG PRESSCUMTWISTER, BIG ARM WHEEL and For Plat Form

Supply Collection & filling of Stone crusher dust including watering, tamping, etc complete Including. For SITUP BOARD, ELLIPTICAL CROSS TRAINER, SKY WALKER, AIR WALKER, CHEST PRESS, LEG PRESS, TWISTER 3 IN ONE, CHEST PRESS CUM ARM PULLER, HORIZONTAL BARS, PULL UP BARS, 3 IN ONE AIR WALKERCUM LEG PRESSCUMTWISTER, BIG ARM WHEEL and For Plat Form

RBR-FNDN-4 II(iii): Providing P.C.C grade M 15 Nominal mix concrete for structures using 20mm size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH including cost towards material, labour, formwork and all other incidental charges for complete finished item of work as directed by the Engineer in Charge. For SITUP BOARD, ELLIPTICAL CROSS TRAINER, SKY WALKER, AIR WALKER, CHEST PRESS, LEG PRESS, TWISTER 3 IN ONE, CHEST PRESS CUM ARM PULLER, HORIZONTAL BARS, PULL UP BARS, 3 IN ONE AIR WALKERCUM LEG PRESSCUMTWISTER, BIG ARM WHEEL and For Plat Form

SIT UP BOARD : Supply, Delivery, Installation and Commissioning of DOUBLE SIT UP BOARD/DOUBLE ABS STATION / HD SIT UP STATION with center pipe & prime stand sleeve shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Footrest support & sit up board support pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm, Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm&Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with MIG welded. Sit up board made with high quality FRP / SS304 perforated material. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mm X 150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at Two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

ELLIPTICAL CROSS TRAINER: Supply, Delivery, Installation and Commissioning ELLIPTICAL CROSS TRAINER with prime stand pipe shall be minimum of 80mm NB dia of thickness not less than 4.50mm, pedel link pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 32mm NB dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 3.60mmareof'C'class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with MIG welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance- free ball bearing. Footrest shall be made of Aluminum material-LM26grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closedbySS304grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN16630safetynorms and to be produced Proof of valid certificate conformity to EN16630.

SKYWALKER: SKY WALKER/DOUBLECROSS WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with MIG welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re- lubrication i.e., maintenance - free ball bearing. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material-LM26 grade. Total structure is supported on base frame shall be made up of rectangular pipe of 50X50X3mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mmthickplatewithGMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate.

AIRWALKER: Supply, Delivery, Installation and Commissioning of DOUBLE HEALTH WALKER / AERIAL STROLLER DOUBLE / AIR WALKER / FUN WALKER DOUBLE with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with MIG welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance -free ball bearing. Foot rest shall be made of Aluminum material -LM26 grade. All pipes shall be uniformly powder coated up to minimum100microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closedbySS304grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN16630safetynorms and to be produced proof of valid certificate conformity to EN16630.

CHESTPRESS: SEATED CHEST PRESS / CHEST PRESS DOUBLE with prime stand pipe shall be minimum of100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of' C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns ionized coated and zinc dipped joint with MIG welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance-free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size75mmX150mmof SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN16630 safety norms and to be produced proof of valid certificate conformity TO EN16630.

Leg Press: Providing and fixing Leg Press Double made from GI pipe Dimensions (LxWxH)=2000X400X1600 MMMAINFRAME114MM OD G>I “C” Class pipe 2)Foundation Plate M.S round plate of 220mm 10mmthickness 3)Seat frame42mmOD”B”class G.Ipipe 4) Seat frame 320x300mmx2mmthick G.I Seat With coenerfillet for safety 5)Bearing Deep groovee Self Aligning ball Bearings with permanent lubricated Reputed brand 6) Bearing Bushes 60mm OD seamless pipeTop Closing Caps GI material Coating best Quality of powder coating 80-100 micronsthickness Hardware grade 4.6 galvanized maximum loading weight 240kg and only two persons can use at a time safety instruction and Exercise chat start & finish Position Stick on Product.

TWISTER 3 IN ONE: Supply, Delivery, Installation and Commissioning of HD WAIST TWISTER / TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mmNB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75microns zinc dipped joint with MIG welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance -free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with

CHEST PRESS CUM ARM PULLER: Supply, Delivery, Installation and Commissioning of PULL DOWN CHALLENGER / SHOULDEREXERCISER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mmNB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75microns zinc dipped joint with MIG welded. The two handle frames arehingedover100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance – free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closedbySS304grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size75mmX150mmof SS 304 grade Plate with0.7mmthickshall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Horizontal Bars : Main frame made from G.I ( “C” Class ) pipe 114 mm Foundation Plate – M S round plate of 220 mm and 10 mm thickness Reaming frame–Made-up of 42 mm ( “B” class ) G.I pipes Handle42mmand13mm “B” Class G.I Pipes.

PULLUP BAR&PARLAR BAR: Supply, Delivery, Installation and Commissioning of PULL UP BAR &PARLAR BAR with center pipe & prime stand sleeve shall be minimumof90mmNBdia of thickness not less than 3mm,&pipe shall be minimumof50mmNBdia of thickness not less than 3.5mm dia of thickness notlessthan3.60mmareof 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with MIG welded. Sit up board made with high quality FRP / SS304 perforated material. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 90mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mmthickplatewithGMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate.

3 IN ONE AIR WALKERCUM LEG PRESSCUMTWISTER: Supply, Delivery, Installation and Commissioning of /3 IN ONE AIR WALKERCUM LEG PRESSCUMTWISTER withthreeprimestand pipes shall be minimum of 100mm NBdiaofthicknessnot less than 3.5mm, Pedestal frame shallbe minimum of 32mm NBdiaofthicknessnot less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of'C'classheavygrade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped jointwithMIGwelded. The two pedestal framesarehingedover 100NB prime stand pipes with the help of specially heavy duty bearingsshouldbe reputed make and pressfittedforsmooth rotation, and does not require re-lubrication i.e., maintenance -free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closedbySS304grade Stainless Steel for safety against entrapment,corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate ofsize 75mmX150mm of SS 304 grade Plate with 0.7mm thickshall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propyleneCo-Polymer (PPCP)andUV- stabilized should be used. All products of equipment should be manufactured as per EN16630safetynorms and to be produced proof of valid certificate conformity toEN16630.

BIG ARM WHEEL : Providing and fixing Big arm wheel made up of G.I Pipes with dimensions (L*W*H)=850*820*1950 mm Main frame made from G.I ( “C” Class ) pipe 114 mm Foundation Plate – M S round plate of 220 mm and 10 mm thickness Shoulder ring pipe – 42 mm B class GI Pipes Connectingpipe–33 mm B class GI Pipes Nylon Knob with Bearing– Is Fixed on shoulder ring pipe for rotating purpose to set to be fixed in position for kids and adults BearingBushes–60mm seamless pipe excluding GST complete.

Art and Painting Work at ITI including paints, brushes, oils, labour charges etc., complete