Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹1.4 CrAccepted-AOC | ₹1.4 Cr | L 1 | Accepted-AOC Lowest one work order issued on 29.07.2021 |
| 2 | L 2₹1.4 Cr+₹40,644.83 (0.29%)Rejected-Finance | ₹1.4 Cr+₹40,644.83 (0.29%) | L 2 | Rejected-Finance Second Lowest Unsuccessful Tenderer EMD amount to be refund |
Tender Value
Refer Docs
EMD Value
₹86,800
Closing Date
15 Jun 2021, 6:00 pmClosed
Superintending Engineer South Circle TNPHC Ltd
Tamil Nadu Police Housing Corporation Limited South Circle No 1 Inspector quarters TSP VI Battalion Campus Near Natham Road Madurai 625014
Construction of Prohibition Enforcement Wing Police Station building and Deputy Superintendent of Police Camp office cum residence building with development works at THAKKALAI in Kanniyakumari District
2021_TNPHC_200565_1
SE/SC.No.01/2021-2022-1
Open Tender
Civil Works
Lump-sum
305 days
THAKKALAI IN KANNIYAKUMARI DISTRICT
Refer tender documents
6 documents required · 6 mandatory
₹0
₹86,800
4 Aug 2021
13 May 2021
17 Jun 2021
13 May 2021
15 Jun 2021
13 May 2021
Amount
1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.
2.6) Supplying and filling with 40mm HBSJ
2.7) Supplying and filling with 20mm HBSJ
13.1) Filling with excavated earth
21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
b. T.W. below 2.00 m length.
23.3) Supplying and fixing of Magnetic door catches
25) Supplying and fixing of MS hold fast
30) Ellispattern flooring
31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
37.1) White washing 3 coats (slaked)
39) Supplying and fixing of MS Grills in position
40) Painting 2 coats - New "wood work"
41) Painting 2 coats - New "iron work"
46) Supplying and fixing of 20 mm dia Alu. Hanger Rod
47) Supplying and fixing of Alu. Towel rail 75 cm long
48) Supplying and fixing of 5 pin Coat stand
49) Supplying and fixing of Chromium plated 8 gauge picture hook
50.3) Supplying and planting avenue trees
50.4) Providing Tree guard
52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)
53.3) Supplying and fixing of C.I. steps (5 Kg)
61.2) Stone ware pipe dry conditon (loose joints) a. 100 mm dia
Electrical arrangements 72) Supplying and fixing of Box type Fibre Fan hook
73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase and 32A Fuse unit per way with neutral link
74) Charges for fixing of "Fan"
76) Supplying and fixing of 8 SWG G.I. wire
77.3) Supplying and fixing of TV/Telephone line Socket
77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line
78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
81) Supplying and fixing of meter cupboard with best Country wood double leaves shutters
86) Providing Pre-constructional Anti termite treatment
238) Anticorrosive treatment for steel grills
Annexure 2.1.1) Supplying and filling the basement with gravel
2.1.3) Supplying and filling with Crushed stone sand
3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand
3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand
3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand
4.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Foundation and basement
6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand
8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Ground Floor
b. In First Floor
c. In Second Floor
9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand a. In Ground Floor
b. In First Floor
c. In Second Floor
10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand 70 mm tk (B.P.) a. In Ground Floor
b. In First Floor
c. In Second Floor
12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8 ¾ "x 4 ¼ "x 2 ") using crushed stone sand 50mm tk. a. In Ground Floor
b. In First Floor
14.2.1) Precast Cupboard slab in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly 40MM Thick a. In Foundation & Basement
15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor
b. In First Floor
15.2.1) Cuddapah Slab 40mm tk. for cupboard slab / Similar works a. In Ground Floor
b. In First Floor
18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c. For Square and rectangular columns and small quantities
d. For Vertical wall
e. For Circular column
f. For Curved surface
21.5.2) Supplying and fixing of soild UPVC door shutter with frame
21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes
21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 30 Grade using crushed stone sand a. 900 x 2100mm
22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws
23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2100mm
23.2.2) Supplying and fixing of 5.5mm thick plain sheet glass with T.W. beeding
23.5) Supplying and fixing of door with Iron bar & M.S Flat for the door Shutter (Lockup) a.1000 x 2100 mm
24.1.1) Supplying and fixing of ventilator with iron bars and MS flats (Lock up) a) V-1200 x 600mm
26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
28.1) Floor plastering in C.M. 1:4, 20mm thick. using crushed stone sand
29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
32.1.3) Finishing the top of terrace floor with one course of Anti reflective ceramic tiles (Cooling tiles) 305mmx305mmx7mm tk in C.M 1:3 20mm tk including Base concrete using crushed stone sand
33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand
34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand
35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand
35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand
36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement
38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works
43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly a) Providing pit
b) Augering 30cm dia
44.6.1) PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)
45.1) Providing Stucco plastering 12mm thick., using Colour Marble chips of size 10mm and below using 72.00 kgs of cement 14.50 kgs of colour cement and 0.15 cum of colour Marble chips for every 10 sqm area over the existing plastered surface
50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand
50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 mixed with fibre using crushed stone sand
52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia
b. 25 mm dia
52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia
53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
53.5) Supplying and fixing of Wash hand basin (white) of size 550 mm x 400 mm
54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)
54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)
56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand
56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand
57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia
58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.
58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,
59.5.2) Supplying and fixing of Gully Trap using Kiln burnt country bricks of size 22 x 11 x 7 cm. using crushed stone sand
60.1) Supplying and fixing of PVC Nahani trap (4way/2way) using crushed stone sand
61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe
b) 160mm dia UPVC Non Pressure pipe
62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend
62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee
64.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Fan Point
66.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Staircase Light Point.
67.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point PVC box (Fire Retarded Box) Switch Board Itself.
68.2.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for 5 amps 5 pin plug socket point at Convenient Places.
69.1) Supplying and fixing of 15 amps 3 pin flush type plug using (PVC Box, Fire Retarded Box)
71.2) Supplying and fixing of 32 Amps triple pole main switch
75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed
79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit
80.1) Supplying and fixing of 450x375x20mm T.W. plank
85.1) Supplying of G.I pipe 40 mm dia, 'B' class
87.1) Supplying and fixing of Three Phase ELCB/RCCB
87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)
98.3) T.W.single leaf Panelled door shutter with brass screws Suitable for door of size a. 900 x 2100mm
99) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1500 x 2100mm
99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1050 x 2100mm
99.1.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1200 x 2100mm
100) Supplying and fixing of 9 watts LED Bulb
101) Supplying and fixing of 25 watts LED bulb with street light fittings
102) Supplying and fixing of 4'18 watts crystal LED tube light
103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb
104) Supplying and fixing of 12 watts LED bulb for bulk head fittings
105.1) Run off main 4 wires of 4 Sq mm. (EB service connection)
112.1) Supplying and fixing of Exhaust Fan 225mm dia
114) Supplying and delivery of following PVC armoured LTUG cable a) 3.5 core 35 Sqmm PVC armoured LTUG cable
115) Labour charges for laying of PVC Aluminium armoured LTUG cable below ground level
116) Labour charges for laying of PVC Aluminium armoured LTUG cable above ground level
117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 35 Sqmm brass cable gland
119) Supplying and delivery of 2 HP submersible pumpset single Phase suitable for borewell Duty - 20 lpm x 125m
119.1) Supplying and delivery of 2 HP Monoblock pumpset three Phase suitable for borewell Duty - 35 lpm x 100m
120) Labour charges for erection of single phase 2 HP submersible pumpset
120.1) Labour charges for erection of three phase 2 HP Monoblock pumpset
121.1) Supplying and delivery of single phase panel board for 2 HP submersible pumpset
121.2) Supplying and fixing of three phase panel board DOL with two level guard and auto start for 2 HP Monoblock pumpset
122) Supplying and fixing of following dia UPVC/GI/GM specials a) 50 mm dia GM Non Return valve
b) 50 mm dia GI Union
c) 50 mm dia GI Hex Nipple
d) 50 mm dia GI Tee
e) 50 mm dia brass foot valve
f) 50 mm dia UPVC Elbow
g) 50 mm dia UPVC wheel valve
h) 32 mm dia GI Coupling
i) 32 mm dia GI Elbow
j) 32 mm dia GI Hex Nipple
k) 32 mm dia brass Non return valve
l) 32 mm dia GI submersible adoptor
m) 32 mm dia UPVC Elbow
n) 32 mm dia UPVC Coupling
o) 32 mm dia UPVC FTA
p) 32 mm dia UPVC MTA
q) 50 mm dia UPVC Coupling
r) 50 mm dia UPVC FTA
s) 50 mm dia UPVC MTA
t) 50 x 32 mm dia UPVC Reducer Tee
u) 32 mm dia GM Gate valve
v) 65 mm dia GI Bend
w) 65 mm dia GI Elbow
x) 65 mm dia GI Coupling
123) Supplying and Delivery of 3 core of 4 Sqmm flat type copper cable
124) Supplying and fixing of following dia GI pipes 'B' class in position a) 25mm dia GI pipe
b) 65mm dia GI pipe
125) Supplying and laying of following dia of UPVC pipe a) 32mm dia UPVC pipe
126.1) Supplying and fixing of folllowing dia MS Clampset a) 65mm dia M.S.Clamp set
126.2) Supplying and fixing of folllowing dia MS Bore Clamp set a) 150mm dia MS Bore clamp set
127) Supplying and delivery of Nylon rope for tieing of submersible motor pump
129) Supplying and fixing in position of TamilNadu Government Logo emblem a) 600mm size
130) Supplying and fixing of Aluminium Die casting letters a) 23 cm size letter
130.1) Supplying and fixing of PVC name lettering in Tamil etc., all complete
131) Supplying of 6 lever Lock and Key etc.,
132.2) Drilling 140mm / 150mm dia bore well in alluvial soil or sedimentary rock a) Upto 76m depth ending below ground level
b) From 77m depth upto 106m depth ending below ground level
132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level
b) From 61m depth upto 90m depth ending below ground level
c) From 91m depth upto 106m depth ending below ground level
133) Supplying and fixing of following dia PVC casing pipe a) 150mm dia PVC Casing pipe
b) 150mm dia PVC Ribbed screen pipe
134) Supplying and fixing of 160mm dia PVC end cap for covering the borewell etc.,
156) Supplying and fixing of 3 Nos. of 100 Amps 500 volts grade porcelain fuse unit
157) Supplying and fixing of three phase 100 Amps Bus Bar arrangements
158) Supplying and fixing of 250A change over / rotary switches
161) Supplying and fixing of single pole 6 Amps to 32 Amps MCB
238.1) Anticorrosive treatment for window grills
344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
367) Providing wooden melamen polish for main door new wood work
378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand
379.5.1) Supplying and laying of Granite tiles flooring of size 2'x1', 10mm tk (Ruby red) over cement plastering in CM 1:3 20mm thick using crushed stone sand
379.7) Supplying and fixing of Granite slab of size 4' x 2' 18-20mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a. In Ground Floor
383.2) Providing double nosing to the edges of granite slab
383.4.1) Supplying and fixing of stainless steel sink of size 550 x 450mm x 200mm thick
384) Supplying and fixing of PVC flushing cistern
448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap
796) Two coat of Plastic emulsion paint including primer for outer wall surfaces
s.rajagopalan
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_239159.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .