REPAIR REPLACEMENT OF US RUSTED AC CI GI PIPE LINE INCLUDING CONNECTED ITEMS SUCH AS FITTINGS AND CONTROL VALVE CONNECTED ALLIED WORKS AT ARMY NAVAL

Amount

M & L excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

M & L excavation in trenches in hard/dense soil not less than 1.5 mtr deep and not exc 3 mtr in deep for pole foundation etc complete all as specified and as directed.

M & L for returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed

M & L for removing excavated soil to a distance not exc 1.5 mtr above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed

S & L sub class burnt bricks for cable protection complete as specified as directed

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable lugs including taking down old unserviceable cable for following size 2 C x 10 Sqmm

As per item No. 7 above but for 4 C x 10 Sqmm

As per item No. 7 above but for 4 C x 16 Sqmm

As per item No. 7 above but for 3.5 C x 25 Sqmm

As per item No. 7 above but for 3.5 C x 35 Sqmm

As per item No. 7 above but for 3.5 C x 50 Sqmm

As per item No. 7 above but for 3.5 C x 70 Sqmm

As per item No. 7 above but for 3.5 C x 95 Sqmm

As per item No. 7 above but for 3.5 C x 120 Sqmm

M&L for replacement of iron work of any type incl cross arms, supports, bracing MS clamps etc made out of MS channel/angle iron/flat iron/ round section of any size and bolt nuts and washer incl painting with two costs of aluminium paint over a coat of red oxide all as specified and as directed

M&L in replacement of pin type porcelain, vitreous white or brown insulator incl one galvanized mild steel spindle two galvanized iron washer and galvanized iron nut 100 mm height and 65mm dia for 1100 volts grade complete all as specified and as directed

M & L in replacement of shackle type porcelain, vitreous white or brown insulator incl one galvanized mild steel spindle two galvanized iron washer and galvanized iron nut 75 mm height and 90mm dia for 1100 volts grade complete all as specified and as directed

M & L for GI tubing light grade 40mm with all accessories for cable protection fixed on poles/bldgs/road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

M & L for GI tubing light grade 50mm with all accessories for cable protection fixed on poles/bldgs/road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

M & L for GI tubing light grade 80mm with all accessories for cable protection fixed on poles / bldgs / road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.5 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and incl galvanized strip 25x4mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 1991 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

M & L for tightening of ACSR (Aluminium conductor steel reinforced) conductor of any size between two poles 06 runs of conductor incl binding wire of appropriate size complete incl clearing of path and branch cutting clearence upto 01 meter for either side of aluminium conductor etc all as specified and as directed

S & F in replacemet of UNSV existing /suitable size MCCBs 4 pole 415 Volts 50HZ incl complete connections with incoming cable and out going cable with suitable thimbles and crimping the thimbles with crimping tools insulating the naked portion with insulation tape as under:- Make INDOASIAN or equivalent. MCCB 100 Amps, 16 KA with adjustable Thermal setting

As per item No. 25 above but for MCCB 200 Amps 36 KA with adjustable Thermal setting .

As per item No. 25 above but for MCCB 250 Amps 36 KA with adjustable Thermal setting .

As per item No. 25 above but for MCCB 315 Amps 36 KA with adjustable Thermal setting .

As per item No. 25 above but for MCCB 63 Amps, 25 KA with adjustable Thermal setting

As per item No. 25 above but for MCCB 100 Amps, 16 KA with adjustable Thermal setting

M & L for replacement of PVC 2 line separator 230 volts 50 Hz all as specified as directed

M & L for replacement of PVC 4 line separator 415 volts 50 Hz all as specified as directed

Supply and fix cable jointing kit for 1.1KV grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core/4core XLPE armoured aluminium conductor cable for following sizes:- 3.5 C x 25 to 35 Sqmm

As per item No. 33 above but for 3.5 C x 50 to 120 Sqmm

As per item No. 33 above but for 3.5 C x 50 to 150 Sqmm

As per item No. 33 above but for 3.5 C x 185to 300 Sqmm

M&L for painting of steel tubular/PCC poles of any height and type ,incl security light mounting brackets with one coat of aluminium paint/two coat of cement base paint incluing painting black and yellow strip or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering of pole complete all specified and as directed.

M&L of ACSR (Aluminium conductor steel reinforced) conductor of any size on poles incl binding wire of appropriate size complete incl clearing of path and branch cutting including dismantling unsv ACSR conductor and including pruning of tree branch for 1 m on either side of conductor complete all as specified and as directed

Refixing of ACSR conductor connected with new existing wire tightening to insulator incl line clearance by pruning of tree branch approx 1 m apart from conductor tightening side including dismantling the ACSR conductor complete.

Stay assembly complete with all accessories as shown in elect plate No 1 of SSR Part-I consisting of stay rod 20mm dia 1.8 mtr long,size of stay plate 230 x 230 x 6 mm with nuts,bolts,insulator stay clamps etc. complete all as shown on drawing and as directed Note:- Excavation and stay wire shall be measured and paid separately

M&L for galvanized stay wire stranded 7/4 mm complete all as specified and as directed

Dismantling the damaged unservicable pole of any type.

Supply and errect steel tubular swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts & screws as specified type 410SP-31, 9 mtr long .

M&L for PCC 1:3:6 type C1 with 20mm graded stone aggregate for couping of pole,filling and mass concrete of pole, make good to road surface , hard standing etc incl necessary form work all as specified and as directed

M&L for PCC 1:4:8 type D2 with 40mm graded stone aggregate in foundation of poles all as specified and as directed

M&L for Outdoor type with sheet metal enclosure box of size suitable size for 4 pole, 50 Hz, 415V Automatic Transfer switch of capacity 315 A complete all as specified and directed as per Model No IHYFCDE315. Make : Havells / Standard / Indoasidan complete all as specified and as directed.

Supply and fix in replacement of Timeline distribution board 32 A 3 pole /230V analog time switch including complete accessories relay contactor, timer etc, all as specified and as directed. Make:- Indoasian Cat No. TL032AB0

M&L for finding cable fault in LT cables any sizes complete all as specified and as directed

Supply & fix in repair on pole/ wall etc GI pipe bracket made of 40mm bore light grade GI pipe1.5 mtr long suitably bent to shape and fixed on wall/ pole for fixing street light fitting with 2 Nos suitable MS clamps of size 25 x 3 mm size incluiding bolts, nuts, washers all as specified and as directed.

Supply and fixing, replacement of moulded (FRP) junction box with IP 65 protection of size 300x200x80mm with 32 Amp 4 way heavy duty terminal block with 6 Amp MCB SP and two number of cable entry gland of standard size with suitable GI strip to fix with pole complete all as directed

Supply and fixing 60 W LED street light fitting with pressure die cast housing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection and impact resistance of IK 08. 4kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance .including taking down old unserviceable street light fittings from pole. Make:- Bajaj, Cat part No. ENXT P 72L WH CR PC SD or techno commerical equivalent in CG / Havells / Philips / Wipro.

Supply and fixing 70 Watt next generation LED street with pressure die-cast housing alongwith prismatic polycarbonate modular secondary lensoptics for city road application with IP-66 ingress protection and impact resistance of IKO8, 4KV inbuilt and 10 KV external surge protection with top opening drive cover for easy maintenance including taking down old unserviceable street light fittings from pole. Make:- Bajaj, Cat part No. ENXT P 84L WH CR PC SD or techno commerical equivalent in CG / Havells / Philips / Wipro.

Supply and fixing 90 W LED street light fitting with pressure die cast housing and toughened glass and individual LEDs with secondary lens optics with IP 66 ingress protection and impact resistance of IK 07. 5kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance .including taking down old unserviceable street light fittings from pole. Make:- Bajaj, Cat No ENXT P 108L WH CR TG SD or techno commerical equivalent in CG / Havells / Philips / Wipro.

S&F in replacement of 2 runs of PVC insulated 2.5 sqmm single core multistranded copper conductor cable and one run of 2.5 sqmm copper wire as earth continuity conductor drawn through and incl rigid non metalic conduit 20 mm external dia fixed on poles & connecting up all as specified and as directed. Note: Two runs of cable and one run of earth wire and one run of conduit shall be measured as unit length.

Supply & fix in replacement of on load Change over switch 4 pole in sheet metal enclosure compact design rating 63 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks.

Supply & fix in replacement of on load Change over switch 4 pole in sheet metal enclosure compact design rating 100 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks.

Supply & fix in replacement of on load Change over switch 4 pole in sheet metal enclosure compact design rating 400 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks.

Dismanling and taking down old unserviceable CFL type street light fittings from Pole, removing the unserviceable CFL and replacement of new LED bulb 40 watt with suitable size holder and refixing the existing/new location all as directed at site. Make :- Bajaj

Dismanling and taking out the LED street light fittings any make from Pole and removing the burned out /unserviceable LED driver 25 W to 60W and replacement of new drive to make the fitting serviceable and refixing the existing/new location all as directed at site.

Dismanling and taking out the LED street light fittings any make from Pole and removing the burned out /unserviceable LED driver 90 W and replacement of new driver to make the fitting serviceable and refixing the existing/new location all as directed at site.

Dismanling and taking out the flood light from high mast pole and removing the burned out/unserviceable LED driver 200 W and replacement of new drive to make the fitting serviceable and refixing the existing/new location all as directed at site.

Supply & Fix 200W LED flood light luminaries with innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highmast lighting with complete accessories including taking down old unserviceable flood lights from high mast pole all as specified and as directed. Make:- HAVELLS, Code No. : JETAVALOURFL200WLED757PINTNBLTG or its techno commerical equivalent in Phillips / CG / Bajaj / Wipro

S&F in replacement of new generation 25 Watt post top energy saving IP-65 enviornmental, friendly long life with symmetrically light distribution, spun aluminium with high power LED. Make :- Havells Cat No. CORALPT25WLED757PSYMTOPC or its techno commerical equivalent in CG / Philips / Bajaj / Wipro.

S&F in replacement of Stellar LED post-top offering combination of sturdy design, execllent illumination and aesthetics in one go. IP 66 and IK 10 rating ensures it stands tall amid varid environemtnal conditionsl , friendly long life with symmetrically light distribution, spun aluminium with high power LED. Make:- Mk - Havells NEBULAPT40WLED857PSYMTOPC or equivalent Phillips/ Crompton Greaves / Wipro / Bajaj

S&F in replacement of TERRAIN post top lentern is a wether proof indirect lighting solution wich improves horizental uniformity , with reduced glare and improved lighting control saving IP-65 enviornmental , friendly long life with symmetrically light distribution , spun aluminium with high power LED. Make :-Mk -Crompton LPTC-40-CDL or equivalent-Phillips / Havells / Wipro / Bajaj

M&L for painting of outdoor type Feeder piller panel upto the size of 1100 x 450 x 1200 mm (approx), incl replacement of door hinges with new one and apply one coat of smoke grey colour paint and base angle with black paint complete or as directed by Engineer-in-charge complete all specified and as directed.

M&L for painting of outdoor type Lt panel upto the size of 2500 x 600 x 3000 mm (approx), incl replacement of door hinges with new one and apply one coat of smoke grey colour paint and base angle with black paint complete or as directed by Engineer-in-charge complete all specified and as directed.

S&F in replacement of LED bollard of 09 Watts, square (in plan) shaped extruded aluminium housing with opal acrylic diffuser fixed in die cast aluminium frame and IP 65 protection complete including PCC work (1:2:4) as foundation for mounting bollard of size 30x30x30cm and one way DB box with MCB SP 6 Amps fitted inside including connection from the MCB to lights using 1.5 Sqmm three core cable all as directed. Make : Bajaj, Cat No : BGBOS 605 9W LED or equivalent make of Havells / Crompton / Phillips.

Boring of holes under road, pavement, hard standing by trenchless techless using ultra sounding technique and necessary machine including HDPE pipe of 63 mm dia bore suitable for 0.4 mpa working pressure.

M&L for repair of outdoor type LT panel front opening door upto minimum size of 1.5 RM x 2.00 RM (approx), including replacement of door hinges with new one, painted with one coat of red oxide primer and two coats of synthetic enamel paint of smoke grey colour as directed by Engineer-in-charge complete all specified and as directed.

Supply, testing and commissioning in replacement of weather and vermin proof LT feeder pillar box factory fabricated outdoor cubical/kiosk type CPRI approved and confirming to IS 5036 totally enclosed made out of 3 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel centre opening front and rear opening doors (covers) with handles, each control switch to be fixed in each compartment with hinged door, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly with powder coated, painted one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour and bus bar Contd/--72

Taking up DI water mains (including all fittings), with spigot and socket ends and lead joints/Titan Joints for the following size :- 100 mm bore

Laying only DI pipe line 100 mm bore with spigot and socket, in any length laid in trenches. Note :- (i) Cost of DI specials shall be measured and paid separetely.

Cutting of DI pipe in position for insertion of CI/DI specials of following sizes;- 150 mm bore

As per item No. 75 above but for 100 mm bore

M& L for DI Specials like bends, tappers, tee pieces all sockets, all spitgot, collars, caps & plugs any size & shape as ordered by engineer- in- charge incl testing complete as specified & directed for the following sizes:- Up to 150 mm bore

M& L Run lead joint for water mains of the following size of CI/DI pipes :- 150mm

As per item No. 78 above but for 100mm dia pipe Note:- Excavation and earth work shall be measured and paid separately

Dismantaling the sluice valves in various location and reconditioning the sluice valve by replacing SS spindle , spindle nuts with brass ring, gland nuts, gland packing etc and refixing after properly repairs of the following sizes:- 200 mm dia bore

As per item No. 80 above but for 150 mm dia bore

As per item No. 80 above but for 100 mm dia bore

As per item No. 80 above but for 80 mm dia bore

Material and labour for repacking stuffing box of sluice valve spindle including taking a part and reassembling of following sizes:- 150 mm bore

As per item No. 84 above but for 100 mm bore

As per item No. 84 above but for 80 mm bore

S&F GI water tubing medium grade with all fitting (flanged / socket / union / tee etc) laid in trenches / walls / floors / roof including taking down unsv pipeof following sizes :- 15 mm dia

As per item No. 87 above but for 20mm dia

As per item No. 87 above but for 25mm dia

As per item No. 87 above but for 40mm dia

As per item No. 87 above but for 50mm dia

As per item No. 87 above but for 80mm dia

As per item No. 87 above but for 100mm dia

Supply & fixing in replacement of the following size gun metal Gate valve with iron wheel 15 mm dia

As per item No. 94 above but for 20 mm dia

As per item No. 94 above but for 25 mm dia

As per item No. 94 above but for 40 mm dia

As per item No. 94 above but for 50 mm dia

Dismantling Old valve pit complete with deteriorated MS cover and Construction of new brick massonry valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 100mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement .

S & F in replacement of sluice valve both side flanged and ISI marked (IS-780) of sluice valve cast iron body with S/S spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt,washers and rubber insortion packing 6mm thick etc of following sizes:- 150 mm dia bore

As per item No. 100 above but for 100 mm dia bore

As per item No. 100 above but for 80 mm dia bore

Removing of unserviceable foot valve from tank and replacement with new CI foot valve of following sizes:- 150 mm dia bore

As per item No. 103 above but for 100 mm dia bore

As per item No. 103 above but for 80 mm dia bore

Removing old unserviceable float valve from service tank supply and fix float valve with PVC body aluminium float rod ,nylon float high presure type (Make:- Prayag)for the following size:- 20 mm bore

As per item No. 106 above but for 25 mm bore

Taking out old unserviceable foot valve from UG sump and removing unserviceable leather from suction line and replacement the same with high quality leather including nuts, bolts, washer etc and servicing for the following sizes:-. 100 mm bore

As per item No. 108 above but for 80 mm bore

M S K CONSTRUCTION (BID ID -3141576)