ELECTRICAL WORKS @ SITARGANJ

S,F&E-STRUCTURAL — STEEL STRUCTURE:MS STRUCTURAL STEEL LIKE CHANNELS, ANGLES,FLATS, PLATE OF VARIOUS SIZES AS PER REQUIREMENT CONFORMING TO IS-2062.

S,F,E,W&PAINTING OF CHEQ — SUPPLY AND FIXING OF STRUCTURAL QUALITY CHEQUERED PLATE OVER ISMB STRUCTURAL FOR MEZZANINE FLOORING COMPLETE IN ALL RESPECT. MATERIAL SPECIFICATIONS SHOULD BE STRICTLY IN ACCORDANCE WITH IS 3502. DIMENSIONAL STANDARD SHALL BE IN ACCORDANCE WITH IS 1852 AS DIRECTED BY ENGINEER-IN-CHARGE.

EMBEDDED INSERT PLATES — FIXING OF CARBON STEEL REFRACTORY ANCHORS/LUGSSCOPE OF WORK:1.SUPPLY AND WELD NEW CARBON STEEL/STAINLESS STEEL 316L LUGS/ANCHORS/SPEED FIX STUDS WITH WASHER ON SHELL, AS INSTRUCTED BY HPCL SUPERVISOR IN-CHARGE. 2.USE AWS E309MO ELECTRODE FOR WELDING PURPOSE.3.VENDOR TO PROVIDE TC FOR THE SAME. HPCL ALSO RESERVES THE RIGHT TO CARRY OUT CHECK TEST AND REJECT THE MATERIAL.PAYMENT WILL BE MADE ON PER KG OF MATERIAL SUPPLIED AND FOR EACH ANCHOR FIXED FOR CS OR SS ANCHORS SEPARATELY.

ANCHOR/FDN BOLTS — FIXING OF CARBON STEEL REFRACTORY ANCHORS/LUGSSCOPE OF WORK:1.SUPPLY AND WELD NEW CARBON STEEL/STAINLESS STEEL 316L LUGS/ANCHORS/SPEED FIX STUDS WITH WASHER ON SHELL, AS INSTRUCTED BY HPCL SUPERVISOR IN-CHARGE. 2.USE AWS E309MO ELECTRODE FOR WELDING PURPOSE.3.VENDOR TO PROVIDE TC FOR THE SAME. HPCL ALSO RESERVES THE RIGHT TO CARRY OUT CHECK TEST AND REJECT THE MATERIAL.PAYMENT WILL BE MADE ON PER KG OF MATERIAL SUPPLIED AND FOR EACH ANCHOR FIXED FOR CS OR SS ANCHORS SEPARATELY.

HAND RAILS — TUBULAR STEEL HAND RAILING-SUPPLY, FABRICATION, WELDING AND ERECTION OF 40 NOMINAL BORE HEAVY SECTION (4.37 KG/M OR MORE) OR HIGHER PIPE SECTION HAND RAILS FOR STAIRWAYS,LANDING PLATFORMS, ETC ALL COMPLETE AS PER SPECIFICATIONS. THE PIPE HAND RAILS SHALL BE OF STRUCTURAL QUALITY AS PER IS: 1239. PAINTING IS ALSO IN THE SCOPE OF THE ITEM AS PER FOLLOWING SPECIFICATIONS. SURFACE PREPARATION (EXPOSED AREA OF STEEL MEMBERS AND ATTACHMENTS) BY SAND BLASTING TO SA 2.5 GRADE, PAINTING WITH 2 COATS OF EPOXY PRIMER (TOTAL DFT-75 MICRONS) AND 2 COATS OF APPROVED QUALITY AND SHED EPOXY PAINT (TOTAL DFT-40 MICRONS) OF APPROVED MAKE.

DESIGN SUPPLY 11 KV HT — H POLE STRUCTURE-DESIGN AND SUPPLY OF H-POLE STRUCTURE FOR 11 KV INCOMING POWER SUPPLY WITH GANG OPERATED ISOLATOR, D.O. FUSE WITH BASE, LIGHTNING ARRESTORS, INSULATOR, EARTHING, PADLOCKING AND OTHER ACCESSORIES AS PER ATTACHED SPECIFICATIONS.

SUP - 125W FLP LED STREET — LED; POWER CONSUMPTION:150 W; LUMINAIRE EFFICIENCY:>0.86; LED LIFE:50000 HR; MINIMUM LUMEN OUTPUT:16500 LUMENS; LIGHT COLOUR:COOL WHITE, PURE WHITE, WARM WHITE; INGRESS PROTECTION:IP65; INPUT SUPPLY VOLTAGE RANGE:180 TO 300 V; POWER FACTOR:>0.95; FREQUENCY:50 HZ; BODY MATERIAL: DIE CAST ALUMINUM; MANUFACTURE:CROMPTON GREAVES LIMITED; PHILLIPS; BAJAJ; HAVELLS; BALIGA; SUDHIR SWITCH GEARS

SUP - 125W WP LED STREET — LED; POWER CONSUMPTION:150 W; LUMINOUS FLUX EFFICACY:>100LUMENS/WATT; COLOR RENDERING INDEX:>70; COLOR TEMPERATURE:>5665K +/- 355K; TOTAL HARMONIC DISTORTION:<10%; LED LIFE:>50000 BURNING HOUR; MINIMUM LUMEN OUTPUT:9000 LUMEN; EFFECTIVE HEAT SINK HEAT DISS.:HEAT SINK - ALUMINIUM PDC; HOUSING:PRESSURE DIE CAST ALUMINIUM; DRIVER:CONSTANT CURRENT OUTPUT DRIVER; OPERATING TEMPERATURE RANGE:0 TO 50 DEG.C; LUMINARIES COLOUR/FINISH:EPOXY POWDER COATED; INGRESS PROTECTION:IP66; INPUT SUPPLY VOLTAGE RANGE:120-270; SURGE PROTECTION:UPTO 5KV WITH FLAG INDICATION; POWER FACTOR:> 0.95; FREQUENCY:50 HZ +/-3 %; DIFFUSERS:TOUGHNED GLASS; ADDITIONAL INFORMATION:YARD LIGHT; LED FITTING MANUFACTURER: PHILIPS/HAVELLS/WIPRO/OSRAM/CROMPTON/GE/SURYA, LED MAKE: NICHIA/OSRAM OPTO SEMICONDUCTORS/PHILIPS LUMILEDS LIGHTING/SEOUL SEMICONDUCTOR/CREE/CITIZEN/BRIDGE LUX, HOUSING WITH TEMPERED PROTECTIVE TOUGHENED GLASS COVER, HIGH VOLTAGE OPERATION SHOULD BE AT 320VAC FOR 48 HOURS/350VAC FOR 2 HOURS, POTTED DRIVER WITH 4KV INBUILT SURGE PROTECTION IN DIFFERENTIAL/COMMON MODE, IK RATING: >IK 07, DRIVER EFFICIENCY: >90%, WARRANTY: 60 MONTHS, PROTECTION: REVERCE POLARITY, OPEN AND SHORT CIRCUIT, BIS MARKING: R NO. ON DRIVER; CERTIFICATIONS: LM79 AND LM80 REPORT

SUP-72W FLP LED LIGHTING — LED LAMP WITH FLAMEPROOF FITTINGS; POWER CONSUMPTION:72 W; LUMINOUS FLUX EFFICACY:MIN. 90 LUMENS / WATT; LUMINAIRE EFFICIENCY:MIN. 99 %; COLOR RENDERING INDEX:ABOVE 70; COLOR TEMPERATURE:ABOVE 5000 DEG KELVIN; LED LIFE:MIN 50,000 BURNING HOURS; MINIMUM LUMEN OUTPUT:7200 +/- 10%; EFFECTIVE HEAT SINK HEAT DISS.:AS PER STANDARD REQUIREMENT; INGRESS PROTECTION,ENCLOSURE:IP 65; INPUT SUPPLY VOLTAGE RANGE:180-250 V; SURGE PROTECTION:5KV; FREQUENCY:50-60HZ; DIFFUSERS:SUITABLE DIFFUSERS TO BE PROVIDE; TYPE OF PROTECTION:FLAMEPROOF- EX D; AREA CLASSIFICATION:ZONE 1; GAS GROUP:GROUP II A; GLASS:TOUGHENED CLEAR WELLGLASS TYPE; STANDARD FOR FLP FITTINGS:IS 2206 PART I AND PART III AND IS 2148; HOUSING: DIE CAST ALUMINIUM HOUSING WITH TOUGH END GLASS COVER, COVER CONFIRMING TO LM6 SPECIFICATIONS; SECURING GLASS TO RETAINING RING: THE FLANGE OR EDGE OF THE GLASS SHALL BE EMBEDDED IN CEMENT APPROVED BY THE TESTING AUTHORITY, AND SHALL BE CONTAINED BETWEEN TWO METAL SURFACES; FLAMEPROOF TEST:ALL FITTINGS SHALL BE OF A TYPE THAT HAS BEEN CERTIFIED AS FLAMEPROOF BY THE RECOGNIZED TESTING AUTHORITY (AS PER IS : 2148-1981) AND SHALL COMPLY IN ALL RESPECT WITH THE TERMS OF CERTIFICATION; MARKING:EACH FITTING SHOULD INDICATE PARTICULARS AS LIST ATTACHED IN TENDER.

SUP-72W WP LED LIGHTING — LED; POWER CONSUMPTION:72 W; LUMINOUS FLUX EFFICACY:>100 LUMENS / WATT; COLOR RENDERING INDEX:>70; COLOR TEMPERATURE:5700 +/- 500 DEG KELVIN; TOTAL HARMONIC DISTORTION:<10 %; LED LIFE:>50,000 BURNING HOURS; MINIMUM LUMEN OUTPUT:7200+/- 10%; EFFECTIVE HEAT SINK:AS PER STANDARD REQUIREMENT; HOUSING:PRESSURE DIE CAST ALUMINIUM; DRIVER:CONSTANT CURRENT OUTPUT DRIVER; INGRESS PROTECTION:IP65; INPUT SUPPLY VOLTAGE RANGE:180-250 V; SURGE PROTECTION:10 KV; POWER FACTOR:>0.90; FREQUENCY:50-60 HZ; ADDITIONAL IFORMATION:STREET LIGHT; REPORT TO SUBMITTED:LM 79 FOR LUMINAIRE,LM 80 FOR LED SOURCE,DRIVER EFFICIENCY:>/=85%