Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC 296 SECTOR 15 PANCHKULA HARYANA | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹9.5 L+₹73,160 (8.37%)Rejected-AOC | L2 | Rejected-AOC REJECT |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
4 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Vikram Singh
GE (U) CHANDIMANDIR
GE(U)/CHM-38/2022-23 ROUTINE MAINTENANCE OF SWIMMING POOL AND OTHER CONNECTED ITEMS UNDER GE (U) CHANDIMANDIR
2023_MES_578943_1
GE(U)/CHM-38/2022-23
Open Tender
Miscellaneous Works
Works
180 days
GE (U) CHANDIMANDIR
Contractor shall be enlisted with MES in Class (E) and above and category a(ii) and d(v)
5 documents required · 5 mandatory
₹500
GE (U) CHANDIMANDIR
₹26,000
Yes
25 Mar 2023
3 Feb 2023
10 Mar 2023
3 Feb 2023
4 Mar 2023
18 Feb 2023
Amount
M&L for taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415/440 volts, 50 Hz, AC of capacity 10 to 15 HP, shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall be deemed to inculde the same. (ii) After assembling, rewinded motor shall be checked for no load current and full load current. Make : Kirloskar, CG or any make as per site.
M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Servicing shall be done as per set periodicity of one month (for servicing the motor pump, contractor shall submit proper documentation maintain record, hours run etc in support) monthly schedule of which shall be communicated to the contractor by the Engineer-in-Charge. (ii) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge.. (iii) Each service per motor pump to be measured and paid as one unit.
Supply and fix in replacement Soft Starter for 10/15 HP Motor 3 phase, 50 Hz, 415 V, Icl current rating 45 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 10 kW motor, complete all as specified and directed. Make: Schneider Electric Cat Part No: ATS22C11Q or equivalent as specified in list of makes as approved by GE.
Supply and fix in replacement DOL Starter for 5 HP Motor with easily replaceable heavy duty fixed and moving contacts and coil voltage between 240-440 Volts made up of stainless steel body, complete all as specified and directed.
Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.
Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Note for Ser No 6 to 14 : All the items/parts mentioned srl no. 6 to 13 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 5.
Supply & Fixing in replacement, under water LED light auto colour changer in crown stainless steel 100% water proof 12V x 30 W, for concrete swimming pool complete all as specified and directed. Make - Austin/Astral Pool/Potent Water Care.
Supply & Fixing in replacement Cast Iron Non Return Valve (NRV) swing check type, double flanged/butt end welded with bolted cover design of size 150 mm complete all as specified and directed.
M & L for 150 mm dia sluice valve cast iron body heavy duty class PN 1.6 , ISI marked (IS-14848) both end flanged, with stainless steel spindle, with cast iron hand wheel, including jointing material like rubber insertaion sheet 3 mm thick, bolt, nuts and fixed to pipe line, testing complete all as specified and directed.
Demolition and removing from site old PCC and M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (mass concrete) for pump set foundation including necessary form work complete all as specified and directed.
S & F in replacement rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge .
Supply and laying / fixing flat three core multistranded PVC insulated & PVC sheathed copper conductor industrial cable, 1100 volts confirming to IS 694:1990 with ISI marking of size 10 Sqmm including connection with motor, starter with appropriate size of copper thimbles including taking out existing unserviceable cable complete all as specified and directed.
Supply & fixing as in replacement PVC nylon braided helical pipe 40mm dia (flexible) suitable for suction sweeper and pumping set complete all as approved and directed by Engineer-in-Charge. Make: Jyoti/Modigold/Laxmi
S&F as in replacement MCCB TP 415 V of capacity 250A, 35KA breaking capacity 1cs=1cu=100% with adjustable thermal & adjustable magnetic setting complete all as specified and directed.
Supply and fixing in replacement 1.5 Sqmm 4 core PVC sheathed copper conductor cable incl accessories complete all as specified and directed.
Supply and fix Galvanised Iron perforated cable tray of size 200mm and thickness 2mm for laying of cables from motor to starter panel and from LT panel to Motor Panel complete all as specified and directed.
Material & Labour for servicing, greasing of suction sweeper pump including replacement of damaged delivery PVC pipe and fitting and any other PVC parts of suction sweeper complete all as specified.
Supply and fixing 40 mm dia twisted nylon rope complete all as specified and directed.
Supply and fix in replacement Gate Valve of size 25 mm cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
Supply and fix in replacement GI Pipe Medium grade of 25 mm dia including all pipe fittings such as elbow,union, tee etc. complete and fixed to wall,ceilings and laid in floors complete all as specified and directed
Supply and fix in replacement PVC Pipe of 20 mm dia including all pipe fittings such as elbow,union, tee etc. complete and fixed to wall,ceilings and laid in floors, complete all as specified and directed.
Supply and fix in replacement pressure gauge 2 inch dial with range of 0-60 psi with brass body bottom mounted for filtration plant complete all as specified and directed.
Supply and fix in replacement UPVC Pipe of size 150 mm for filtration plant inlcuding all pipe fittings such as elbow,union, tee etc. complete all as specified and directed Make : Astral Pool,SFMC,Finolex
Supply and fix foot valve of size 50 mm of PVC material for fixing in suction sweeper along with necessary cutting and grooving all as specified and directed by Engineer-in-Charge.
Material and Labour for taking down suction sweeper assembly including whole set of pump motor and trolley and shifting the trolley to workshop for welding the damaged body, replacing the wheels of trolley, painting the body as specified and directed.
M&L for periodical Servicing of motor pumps of capacity 2.5/3 HP(Suction Sweeper Motor) which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Servicing shall be done as per set periodicity of one month (for servicing the motor pump, contractor shall submit proper documentation maintain record, hours run etc in support) monthly schedule of which shall be communicated to the contractor by the Engineer-in-Charge. (ii) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge. (iii) Each service per motor pump to be measured and paid as one unit.
M&L for taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415 volts, 50 Hz, AC of capacity 2.5/3 HP, shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall be deemed to inculde the same. (ii) After assembling, rewinded motor shall be checked for no load current and full load current. Make : Kirloskar, CG or any make as per site.
M&L for overhauling of chlorine gas plant by opening the plant and replacing the unserviceable parts and reinstalling same at site. The quoted amount shall also include : (i) Replacement of Nozzle (PVC) for sucking out chlorine gas (ii) UPVC piping with all necessary fittings upto 15 Mtr. (iii) Any other minor part/fittings.
Supply and fixing of door locks suitable for LT Panel/Motor Starter panel of existing type including welding and made to shape all as per specified and directed.
Supply and fix in replacement UPVC Pipe of size 25 mm for filtration plant inlcuding all pipe fittings such as elbow,union, tee etc. complete all as specified and directed.
M & L in replacement Thermal Over Load Relay Range, Conforms to IS/IEC 60947-4-1, Protection against overload & phase loss protection,complete all as specified and directed
M & L in replacement MG21DF Analog Voltage Protection Relay, measurement of Protection Relay, Under Voltage, Over Voltage, Phase Asymmetry, Phase Failure, Phase Sequence complete all specified as directed
M& L for welding the metal memberance article of thickness not exceeding 6 mm after cleaning and preparing the surfaces to be welded together in repairs exc 2.5 cm but not exc 5 cm in length, holding the members in true position while welding and bevelling of edges, as required, complete all specified as directed. Note : Transportation Cost of Welding Machine from shop to site and cost of any consumables like Welding electrode,Flux etc. shall deemed to be included in the quoted cost.
Vasudeva Trading Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .