Soil Test and Drone Survey Margherita Tinsukia

SCHEDULE OF QUANTITY

SN DETAILS OF ITEMS QTY UNIT RATE AMOUNT DSR 2023

1 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested Beyond 12 m and up to 18 m depth 300 Meter 1025.95 307785 18.42.3

2 Conducting soil investigation in cohesive and partly cohesive strata by boring up to the specified depth, including shifting of boring equipment from one bore location to another, collection of disturbed and undisturbed soil samples, conducting Standard Penetration Test (SPT), and carrying out routine laboratory tests such as Grain Size Analysis, Liquid Limit (LL), Plastic Limit (PL), Natural Moisture Content (NMC), Specific Gravity, Triaxial/Direct Shear Test, Consolidation Test, and Chemical Analysis of soil samples as per relevant IS codes. Preparation and submission of bore logs, laboratory test results, geotechnical investigation report, and recommendations for Safe Bearing Capacity (SBC) and suitable foundation system for the proposed structure, complete in all respects. 20 Each 17596.73 351934.6 Market rate

3 Mobilization of necessary equipment, personnel and resources required for carrying out a complete topographical survey of the land in all respects, as per the drawings, technical specifications and directions of the Engineer-in-Charge, including preparation of contours at 0.5 metre interval using advanced survey equipment (drone survey), and taking spot levels at 5.0 metre grid, mapping of existing underground and over-ground facilities, wherever applicable, and submission of all survey drawings, reports, contour maps, contour data with Bench Mark and average cutting/filling calculation based on the Bench Mark/level as decided by the Engineer-in-Charge, complete in all respects. The survey drawings shall be prepared in AutoCAD and submitted in .dwg format. Scope of work shall include: 10.47 Acre 14663.93 153531.35 Market rate

• Layer-wise annotation in CAD

• Overlaid image in CAD drawing

• Orthomosaic image

• Digital Terrain Model (DTM)

• Elevation image

• Digital Surface Model (DSM)

• 3D model (OBJ file)

• All control points

• Vegetation image

• Grid, if required

• Contour maps/data at suitable interval.

Total 813250.95

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

NIQ Number CWC/RO-GHY/ENGG/E-NIQ/26-27/07

Name of Work Soil Investigation and Drone Survey of Newly Acquired Land at Margherita (Tinsukia, Assam)

NAME OF CONTRACTOR

Sr.No. Description Total Amount (in Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 All Items of works based on DSR CIVIL 2023 and MR 813250.95

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note: CWC estimated amount of this sub schedule, after considering prevailing Cost Index and applicable GST& Labour Cess etc complete, is Rs. 7,78,759.00