PROVN OF CERTAIN TOILETS AND ADDN/ALTN TO EXISTING TOILETS AT VARIOUS LOCATIONS AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc complete all as specified and directed.

M & L brick work with using Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) with and including weep holes in brick work, complete all as specified and directed .

M&L Hardcore of gauge n. exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stones or boulders, complete all as specified and directed.

M&L for 100 mm thick, PCC type D-2 1:4:8 (using 20 mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 50mm thick, PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base in floor/pavings etc, finished fair and even without using extra cement, complete all as specified and directed.

M&L for 75mm thick, PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces, finishing even and smooth without using extra cement, complete all as specified and directed.

S&F PVC (SWR ), pipes of 110 mm dia single socketed , in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed .

S&F 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) bend any radius, complete all as specified and directed.

M & L PVC (SWR) floor trap 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper on newly plastered surface, over alkali resistance primer on wall, including preparation of surfaces, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finishing even and smooth without using extra cement, complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.11 but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface, 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar (1:4), complete all as specified and directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm butt hinges, medium weight, stainless steel and fixed, complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete but without glazing bars, dovetailed or welded, complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

S&F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and directed.

Supplying and laying of 20mm CPVC pipes, SDR 11 & Plain CPVC SDR 11 fittings in trenches, complete all as specified and directed.

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cement mortar (1:3) width exc 10 cm but not exc 20 cm girth in brick walls etc, complete all as specified and directed.

S&F, Rotational moulded PVC triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc, but excluding ball valve , complete all as specified and directed.

S & F 25mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F 25mm brass bore ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F vitreous china squatting pan of Orissa pattern water closet 580 x440 mm long, white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe) incl providing lean cement concrete bedding, complete all as specified and directed.

S&F vitreous china, white pedestal pattern (European type) water closet pan with cast iron 'P' or "S" trap, including provision of fixing bolts, complete all as specified and directed.

S&F solid toilet seat cover, moulded frame, high grade thermoplastic, with polymer fitting, white colour, complete all as specified and directed.

S&F Vitreous China, bowl urinal flat back, size of 465 x 355 x 265 mm white, with grating and union for discharge pipe including 32mm dia brass CP spreader union for discharge pipe 32mm, complete with necessary fittings as specified and directed.

S&F Brass chromium plated Tubular towel rail 20mm dia D type, 60 cm long between flanges complete all as specified and directed .

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F of angle valve/stop cock 2-in-1, 15 mm bore with wall flange made of cast copper alloy, chromium plated, fancy type, complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F vitreous china, Urinal partition, white in colour, size 310x 700mm, with and including all fitings and accessories, duly fixed to walls, complete all as specified and directed.

S&F, viterous china, Counter top, wash hand basin of size 700X435X135 mm, complete all as specified and directed.

S&F wash basin mixer, without pop up waste system, long body, made of cast copper alloy, chromium plated, fancy type, suitable for counter top wash basin, suitable for 15mm bore,complete all as specified and directed.

S&F brass, waste fitting coupling, 32 mm bore, chromium plated for WHB including long screwed shanks and fly nuts, complete all as specified and directed.

S&F chromium plated, brass, 32mm bore, bottle trap with 300mm & 190mm long wall connection pipes & Wall flanges, complete all as specified and directed.

S&F Chromium plated, fancy type, brass, hand shower (health faucet) with 8mm dia, 1m long flexible tube & wall hook, complete all as specified and directed.

S&F 15mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone and polishing, complete all as specified and directed

S&F, aluminium anodized chowkhat of size 100x44x1.5mm section with rebate, complete frame, as specified and directed.

S&F 5mm thick, Aluminium composite Panel (ACP Sheet) including necessary clips, rubber packing and aluminium beading (aluminium frame ), complete all as specified and directed.

Supply, fabricating and fixing of aluminium door powder coated (Minimum thickness of coating 0.50 micron) of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick.Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass or prelaminated particle board 9 to 10mm thick of with aluminium beading and rubber gasket/beading as directed by Engineer in charge. Includes 01 mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces, complete all as specified and directed by Engineer-in-Charge at site. (Note :- Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately )

Excavating in Soft/loose soil in post holes (or similar holes ) each not exceeding 0.5 cu. m. getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance n. exc 50 mand making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc complete all as specified and directed.

S&F Rolled mil steel Fe-290 (grade-E-165) as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specified and directed.

S&F Mild steel for framed structure like trussed purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flat sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for exposed GI frame/Grid system, duly powder coated, module of size 600 x 600 mm, suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T-runner of 24 mm size, suspended at 1200mm C/C and cross T-runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of size 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T-runner supported by 4mm dia GI rod from slab / Roof, wall angle at a spacing of 1200 mm C/C etc with and including all fixing accessories and making good to distrubed wall surfaces , as required to match the existing surfaces, complete all as specified and directed by Engineer in charge.

M&L for Metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type, suitable for false ceiling grid/frame module of 600 x 600mm size,complete all as specified and directed by Engineer-in-Charge. (Note : The grid /frame shall be measured and paid separately)

M&L for Double wall corrugated drain pipe DWCP (SN8), 175mm (Outer dia)/150 mm (Internal dia) , (ISI marked) drain pipes laid on 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in bedding and including haunching of pipe, laid in trenches and tested incl fitting of same grade, complete all as specified and directed.

Cutting into existing Manholes for connecting new drains, 150mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres, complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Cutting the existing CI/GI pipe of size 150mm bore such as Bend,tee, reducer ,collar etc and inserting new tees, branches etc for taking out connection up to 80mm, complete all as specified and directed.

Supply and laying pipe galvanised GI Tubing 'medium grade' 40 mm dia in wall/floor and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc, complete all as specified and directed.

Supply and laying pipe galvanised GI Tubing 'medium grade' 25 mm dia in wall/floor and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc, complete all as specified and directed.

S&F, Stop valve, 40 mm dia, cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complte all as specified and directed

S&F, Stop valve, 25 mm dia, cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complte all as specified and directed

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn through and including rigid non-metallic PVC heavy duty concealed conduit (min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminal boxes covered with 3 mm thick plastic laminated white /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed.

All as per item No. 75 mentioned here-in- before but one three pin 5 Amps socket out let on independant board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete.

All as per item No. 75 mentioned here-in- before but 15 Amps 3 pin socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

M&L for two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm in and incl. duly drawn through and including concealed PVC conduit medium grade 25mm dia as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly all complete all as specified and directed. NOTE :- 3 runs of 6 Sqmm cable and one run of PVC conduit will be measured as one running meter.

S&F Piano switch flush button single pole one way 6 Amp, complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin 6 Amp, complete all as specified and directed.

S&F socket outlet,, flush type 2 in 1, 3 pin and 6/16 Amp, complete all as specified and directed.

S&F Piano switch , flush button single pole one way 16 Amp, complete all as specified and directed.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 8 way Double door with suitable rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed.

Supply and fixing 240V 10KA 'B' curve miniature circuit breaker (MCB) SP 6 to 32 in the DB complete with connection testing and commissioning,complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) SPN 6 to 32 in the DB complete with connection testing and commissioning, complete all as specified and directed.

S&F ceiling rose surface backlight, 65 x 50 mm three terminals, complete all as specified and directed.

Supply and fixing LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed.

Supply and fixing LED , mirror light 9 W, soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed.

S&F energy efficient LED building secruity lights 35W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building all as specified and directed.

S&F Fresh Air fan 350 mm sweep, 240 Volt AC single phase completed all as specified and directed.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable and punned down 100mm to trenches complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced precast concrete cable cover for cable protection Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and directed by Engineer-in-Charge.

Supply, Laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm dia size means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 3 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 8 mm dia MS bar 3 Nos both way with handle made out of 10mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

RRR CONSTRUCTIONS (BID ID -3302361)

S.R. Constructions (BID ID -3307801)