Development works for promotion of tourism at Manappad Point Lighthouse.

Amount

CIVIL WORK: Filling, Spreading borrowed with good quality Earth/murrum in low laying area, Including ramming, consolidation in layers of 200mm to 300mm and dressing etc by manually/Mechnically. Inclusive cost of supply of all materials, transportation charges, labours, tools and plants all other charges etc complete.

Earth work excavation in trenches for foundation not exceeding 1.5M width and for shaft wall cross splits and not exceeding 10 sq.m on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated earth soil and disposal of surplus excavated earth soil as directed within a lead of 50M including dewatering if necessary and supply of all labours, tools and plants and all other charges etc. complete.

Providing and laying of plain cement concrete 1:3:6 (one cement 3 Coarse river sand/M-sand and 6 graded granite stone aggregate 20 mm nominal size of approved first quality) including mixing, laying, curing, consolidation excluding side shuttering etc., complete, supply of all materials, labours, tools & plants and all other charges etc., complete.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4(1 cement 4 coarse river sand/ M-sand of approved first quality) simultaneously pointing wherever required as directed including providing through bond between existing wall including cost of all materials, labour, tools, scaffolding, curing,and all other charges for foundation & plinth / in Superstructure.

Foundation & Plinth

Superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)- Foundation & plinth, column,beam,roof slab,lintel etc.as directed at site.

Supplying , cutting , bending , binding , placing in position Fe 500-D/550-D grade steel reinforcement of HYSD tor steel/TMT bars of make SAIL/VIZAG Steel/RINL/TATA-TISCON/ JINDAL for R.C.C work at all heights as per drawing and as directed including supply of binding wire of approved first quality & thickness, cost of all materials, labour, tools and plants and all other charges etc. complete for all works.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m and all complete as per the direction of Enginer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form Work.Lintels, beams, plinth beams, girders, bressumers,cantilevers Weather shade, Chajjas, corbels etc., including edges.etc Complete as Directed.

Providing and Fixing factory made UPVC door frame, made of PVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Including (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Plastering the exposed surface of concrete faces and brick wall masonry at all heights with cement mortar 1:3 (1 cement 3 fine river sand/M-sand of approved first quality) to the required thickness of 15 mm thick in one layer including scafolding, curing, making rough the smooth surface, supply of all materials, labour, tools and plants,and all other charges etc. complete as directed.

Inside Plastering in CM 1: 3

Fabrication, Transportation, Supply and installation of pre-fabricated toilet of site 1.0 m x 1.0 m x 2.10m FRP with bio digester tank (500L),40mm - FRP PUF panel wall/ Roof and 150L sintex water tank at top including water supply & delivery pipe & SS IWC Floor and SS Wash Basin pipe arrangement including all necessary fittings, CFL Lamp, One Exhaust Fan each, Structure made of 40 x 40 x 6mm Angle, necessary Civil works if any requried for installation at the site etc complete. (as per detailed specification mentioned and drawing attached and as directed).

Fabrication, Transportation, Supply and installation of pre-fabricated Specially- abled friendly toilet Size 6 feet x 7 Feet x 8 Feet Complete FRP structure, Re-inforced with Gypsum/PUF and Steel, Modular design Ready to use Structure anti skid FRP -PUF Sandwiched walls with Aluminium & Glass Louvre and Ventilations on all sides. Grab bars provided around closet and wash basin. Wheel chair Ramp with hand Rail provided on Outside, 1 SS Western Style Toilet Seat with flush and hand shower, 1 Urinals/bath shower & 1 SS wash Basin Tap (SS tap).CFL Lamp in centre and One Exhaust Fan, Structure made of 40 x 40 x 6mm Angle, necessary Civil works if any requried for installation at the site etc complete.

Supply and Fixing of M.S Steps for Bio toilets Using ISA 35x35x6 as Side Support and ISA 25x25x3 as step edge with material labour welding, as per site requirement. Including two coats of Synthetic Enamel Paint over one coat of Zinc Chromate Primer,as approved and directed.

Providing and fixing Granite stone slabs 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand/M-Sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing & fixing on roof decorative pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).including supply of all materials, labours tools and plants, and all other charges etc. complete as directed.

Steel work in built up tubular (round, square or rectangular hollow (tubes etc.) trusses etc., including cutting, hoisting, fixing in position, welding and bolted with special shaped washers etc. complete. Tubular Truss for roofing with I" Flat as locking beading as per tiles manufacturers spacing 30cm (C/C) approx. Rafter and Purlin @ 60 cm (2) spacing. Hot finished welded type tubes. including all cost of labours &materials etc., applying a priming coat of approved steel primer completed as directed.

Painting two coats or more coat Exterior wheather paint (APEX ULTIMA) over a coat of cement primer with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter etc., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, puttywhere ever required and all other charges etc., complete . Brand Asian/Berger

Synthetic enamel Painting on steel surfaces, gates, guard bars etc.,- two coats over one coat of red oxide/ zinc chromate metal primer. Including Supply of all materials, labours, tools and plants and all other charges etc., complete.

Providing and fixing water supply line in CPVC pipes including all G.I fittings like Elbow,Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 50 mm dia as and directed. Supply of all materials,labours,tools and plants etc., Complete.

25 mm dia CPVC pipe

32mm dia CPVC Pipe

50 mm nominal dia CPVC Pipes for Inlet and Outlet OHT

Providing and fixing PVC fittings of heavy duty, approved first quality and brand (FINOLEX/ RINCE/ASHIRVAD/ORIPLAST/SUPREME) accessories like elbow, Tee, Bend,Reducers etc.,. Including Supply of all materials, labours, tools and plants and all other charges etc., complete.

110mm dia PVC pipe

110 mm dia PVC Elbow

110mm dia PVC "TEE"

110 mm dia PVC Bend / offset

110 mm dia PVC Floor Trap with screen

110 mm dia PVC Slotted vent cowl

PVC 110 mm dia door bend

P/F. PVC 50 mm dia door bend

P/F. PVC 50 mm dia plain bend

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to First quality & Manufature as approved , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and laying factory made chamfered edge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand/M-Sand, compacting and proper embedding/laying of inter locking paver blocks into the sand/M-Sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Providing and fixing water supply fittings( JAGUAR/CERA) with all necessary fixtures and specials of approved first quality brand/manufacturer,colour (ISI make) as per the following items including all materials, labours, tools & plants and all other charges etc complete.

P/F CP Brass 15 mm dia tap ( Long body)

P/F CP Brass 15 mm dia bib cock Tap

P/F CP Brass 15 mm dia Stopcock

P/F. C.P brass 15 mm dia Pillar cock:-

P/F. C.P brass 15 mm dia Angle cock:-

P/F PVC 15mm dia Flexible connection pipe for Wash Basin

P/F 20mm dia CPVC Ball valve

P/F 25 mm dia CPVC Ball valve

P/F 32 mm dia CPVC Ball valve

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

providing and fixing of steel (I-Beam) for Vertical Column and necessary bracing shall be provided as per the drawing and the cost inclusive of material, labours, Transportation, cutting and welding charges, tools and plan charges etc., complete. Power supply shall be arrangedby the contractor only [I-Section (130x200x12mm)].

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete,0.80 mm thick with zinc coating not less than 275 gm/m².

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and laying 120 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with sand/M-Sand, including finishing smooth etc. complete as per direction of Engineer in- charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and materials shall be of superior quality of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand/M-Sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing of Dining table is rectangular in shape. The dining table Size of (1350 X 840 X 730 mm) and Chair Size of (400 X 570 X 870 mm) set is made of Superior good quality plastic which makes it durable and strong. The table is light in weight and is sufficiently spacious to properly hold a large number of plates and dishes. With a neatly polished surface, it definitely gives your decor a classy touch, suitable for your family meals or even when you have guests over.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board,610x510 mm bowl depth 200 mm Cost inclusive of all labours & material etc Complete.,

Providing and fixing in position pre-cast R.C.C. manhole cover and first quality frame of required shape and approved quality, Rectangular shape 600x450 mm internal dimensions.including supply of all materials, labours, tools and plants and all other charges etc.,complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand/M-Sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.including supply of all materials, labours, tools and plants and all other charges etc., complete.

Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling.With road roller/ hand roller) etc Complete as directed.including supply of all materials, labours, tools and plants and all other charges etc., complete.

Supplying and stacking at site.Red bajri in a pattern to take stack measurment and including all labour, tools & plant cost etc complete.including supply of all materials, labours, tools and plants and all other charges etc., complete.

Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). Mixing earth and sludge or manure. in the required proportion specified or directed by the Officer-in-charge Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of vermy composite , dump manure and/ or good earth to be paid separately).including fine dressing of ground, including supply of all materials, labours, tools and plants and all other charges etc., complete.

Supplying vermi compost at site including cost of materials,labours and tranportation etc., Complete. Mixed with cow manure.

Digging of pits in ordinary soil to depth of 30 × 30 x 45cm and filling the red earth mixed with vermi compost etc., complete including cost [of supply of all labours, materials, tools & plants, diesel and all other charges etc. completc. 70% of value of work done will be paid after completion of work balance 30% value will be paid offer six month from completion of items as directed.

roviding and planting border plants like Mini Ixora / Mini Tecoma Mini Neerium / Ruslilia / Asparagus / Mini Acalypha etc., including forming trenches and filing with mixed earth and vermi compost etc., complete 70% of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Providing and planting Aracaria / Furcuria / Cycas etc., Supply of all materials, labours,tools and plants, transportation etc., Complete. 70% [of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Providing lawn with korean grass as per layout plan and as directed. including application of fertilizer and pesticides before planting. [Supply of all materials, labours, tools and plants transportation etc., Complete. 70% of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Providing and planting flowering shrubs like Ixora / Hibiscus Neerium / Nandiavattai / Tecina and tree saplings like Cardia / cassia baubinia etc including making pit and back filling red earth with vermi composit, Supply of all materials, labours,tools and plants, transportation etc., Complete. 70% of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Supplying potted plants in pots Supply of all materials, labours, tools and plants, transportation etc., Complete 70% of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Providing and planting cycad (sago palm) including excavation of pit, planting, backfilling earth mixed with vermi composit Supply of all materials, labours, tools and plants, transportation etc., Complete 70% of value of work done will be paid offer completion of work balance 30% value will be paide offer six month from completion of items as directed.

Supplying good quality hose pipe of length 30mtrs. (one roll) of approved quality Supply of all materials, and transportation etc., Complete ad directed.

Maintenance of lawn and plants from the date of planting which includes watering, weeding application of fertilizers, pesticide, nematicides, fungicides at periodic intervals and replacement of casualties etc complete.Including cost of Water.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 50 mm nominal dia Pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Supply and fixing of Single Seater Waiting Chair Stainless Steel Seater of Length (24 inches), Width ( 26.77 inches), Height ( 30.70 inches ), including transportation and delivery at the site, as per design, Colour and make as approved.

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600

Supplying and fixing of Children Park Play Equipment as given in photo attached, Size: 7 feet of single piece equiment paint in multi colour steel equipment,.The cost inclusive of all material, labour, transportation etc complete.

Supplying and fixing of Iron Kids Play Coach Swings, as given in photo attached . The cost inclusive of all material, labour, transportation etc complete.

Suplying and fixing of Stepper for kids size of 10 x 2.7 x 8.5 ft., paint in multi colour steel equipment, as given in photo attached . The cost inclusive of all material, labour, transportation etc complete.

Supplying and fixing Metal Royal Play Equipment Children Swing Set , made from suyoperior quality of raw material as per manufacturer specification and as given in photo attached . The cost inclusive of all material, labour, transportation etc complete.

Supply and fixing of kids play equipment from its ground level connected with four nos. of equipment 1no. FRP slide should have length 2.4m X 0.5m. Shall be made by FRP 5mm thickness. Platform should be made by n16g thickness in steel frame and covered by FRP non skid sheet seat is 5mm thickness in FRP, and as given in photo attached in all layers of P.U paint in multi colour steel equipment. The cost inclusive of all material, labour, transportation etc complete.

Supply and fixing of Multicolour 4 seater FRP Four seated sea saw, size:5ft X 8Ft X 1.5Ft manufactured using heavy plastic material to provide a robust and stable platform. The height of the seesaw station can be adjusted, and as given in photo attached .. The cost inclusive of all material, labour, transportation etc complete. as directed.

Supply and fixing of Delux Merry go Round playpro Green and brown kids play equipments size:Approx 5 feet dia 4 Seater manufacturer and supplier of premium quality of Playground Delux Merry Go Round and other playground equipment as given in photo attached .The cost inclusive of all material, labour, transportation etc complete. as directed.

Engaging Excavator for cutting and levelling at site including Transportation of machine to site, and other charges like batta etc including POL charges all complete.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand/M-Sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand

ELECTRICAL WORK: Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200mm x 75mm)

8 Module (125mm x 125mm)

12 Module (200mm x150mm)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6A switch

15/16A switch

3 pin 5/6A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Up to 450mm Sweep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 2.5 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way, Double door

12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 10A

Single pole 16A

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in groung including excavation, sand cushioning, ptrotective covering and refilling the trench etc., as required.

Up to 35 Sqmm

Supply of 4 feet 20 watts LED Tube Light Fitting (Gem Product id No: 5116877-20944947667)

Supply of 18watts LED False ceiiling fittings (Gem Product id No: 5116877-97501688828)

Supply of 18watts LED Bulb suitable for Angle holder (Gem Product id No: 5116877-22193453372)

Supply of 30watts LED flood light (Gem Product id No: 5116877-40163780419)

Supply of Ceiling Fan, Electro-phoretic lacquered/ Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and Hight performance even at low voltage. (Gem Product id No: 5116877-15664471967)

Supply of 200mm Exhaust Fan (Gem Product id No: 5116877-20849308386)

Supply of 25 watts LED street Light fitting (Gem Product id No: 5116877-93033136733)

Supply of 15 watts LED garden Light fitting (Gem Product id No: 5116877-15024190592)

Supply of 4core X 10sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable from Powerhouse to Main DB (Gem Product id No: 5116877-71326010447)

Supply of 2core X 6sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable form Main DB to Cafeteria (Gem Product id No: 5116877-90757234112)

Supply of 2core X 2.5sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable as required. (40Mtrs for Pump, 130Mtrs for Ticket conter, 30 Mtrs for Toilet block, 560 mtr for 2Nos Street Lights and 25Nos Garden Lights) (Gem Product id No: 5116877-47895332362)

0.75Kw Single Phase Water Pump motor (Gem Product id No: 5116877-78600913559)

Supply of 8 SWG Bare Copper wire for earthing

Labour charge for laying 8 SWG wire from Earth bit to Distribution box through pvc pipe with clamp.

Supply and Installation 2.5" Dia Class "C" GI pipe (as per drawing) alongwith applying 1 coat primer and 2 coat aluminium paint (each 20 feet) (2Nos. X 10 feet)

Supply and Installation of 1" threaded "C" Class pipe of length alongwith applying 1 coat primer and 2 coat aluminium paint. (2Nos. X 3 feet)

Supply and Installation of 2.5" to 1" GI reducer alongwith applying 1 coat primer and 2 coat aluminium paint.

Supply and Installation of 8mm thick MS Plate of size 300x300mm (approx. 10Kg each) for Base plate of Street light Poles including gas cutting charges in required size (2Nos x 10Kg = 20Kg)

Supply and fixing of SMC Pole mounted Junction Box (200X140X95mm) with 6 amps Single pole MCB, side hinged door, IP55 with necessary clamps/ Strip, SS screws/Nut and blot, etc.,

Supply and Installation 1.5" Dia Class "C" GI pipe (as per drawing) alongwith applying 1 coat primer and 2 coat painting. (25Nos x 5 feet = 125 feet

Supply of 6mm thick MS Plate of size 250x250mm (approx. 5Kg each) for Base plate of Garden light Poles including gas cutting charges in required size (25Nos x 5Kg = 125Kg)

Fabrication of garden light Poles by welding MS base plate and making holes of 1 1/2 ” GI pipe (as per drawing)

Fabrication of Street light Poles by Cutting, theading, bending and welding with MS base plate, making holes of 2.5” GI pipe (as per drawing)

CI cable routing marker with leg for showing where the cables laid.

Civil Masonary work for making 2’ x 2’ x 2’ pit, erection of pole, and concrete in the ratio of 1:3:4 and 1.5’ x 1.5’ x 1.5’ height brick work and complete plastering for inclusive of material and Labour for Street Light.

Civil Masonary work for making 1.5’ x 1.5’ x 1.5’ pit, erection of pole, and concrete in the ratio of 1:3:4 and 1’ x 1’ x 1’ height brick work and complete plastering for inclusive of material and Labour for Garden Light.

Electrician (Labour) Charges for wiring of streelights, Garden lights and fitting luminaries, etc., 2Nos for street Lights and 23Nos for Garden Light) including wiring materials

Design, fabrication, Supply, Installation, testing and commissioning of wall mounted type LT Distribution panel, Fabriated out of 16SWG CRCA Sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentalized with hinged doors comprissing of the following provisions. with incomer and outgoing with following single front, fixed type Outdoor type, Power Control Panel and Epoxy based powder coating of Colour Siemens Gray. (As per the Line diagram),63A, 4Pole, Islolator - 1 No. Digital 63 Amps 3 phase Energy meter,Digital VAF(Multifuction) Meter along with necessary CT & PT,R,Y,B Phase Indication Lamps (LED Single Pole 10A MCB - 2 Nos. Per phase (Total 6Nos)Type) OUT-GOING FEEDERS:Single Pole 20A MCB - 1 Nos. Per phase (Total 3 Nos)

Miscellaneous items for the purchase of SS screws, Bolts, Nuts & Washers, drill bits, cable ties, 25mm PVC bends, tees, 1,2,3,4 way junction boxes, Cutting plates, 12 mm Fan hooks, Fan rod for extension, wire strippers, steel spring, pvc junctions boxes, SS Clamp, Cable Gland, Copper Lugs, PVC Hose, PVC Pipe for required path way/Road crossing etc.,

A PRABAHAR

M Rajagopal