REPAIRS OF OVER HEAD TANK ( 02 NOS) AT MAKE UP PUMP HOUSE OF FGK KANPUR.

Amount

Repairs of Over Head Tank ( 02 Nos) at Make up Pump house of FGK Kanpur :- For staging height 8.5m but not more than 15m.

M& L for taking down/scraping out all loose and weak mortar or concrete by chiseling wire brush or any other pre applied mortar to expose the reinforcement including cement plaster from any height of RCC overhead tank complete all as specified and directed at site including erection of necessary scaffolding upto required height to carryout the work smoothly all as directed.

M&L for cleaning of corroded reinforcement bars throughly remove oil, grease heavy corroded/loose scale matter including cleaning the bars by wire brush and applying rust removing chemical polymer based on all exposed reinforcement bars complete as per manufactureres instructions including erection of necessary scaffolding upto required height to carryout the work smoothly all as directed . Note surface area of reinforcement to be treated only to be measured.

M&L for providing and fixing additional reinforcement of MS cold twisted deformed IS-1786 (or TMT bars) 8mm dia and over cut to length, bent to shape as required in places wherever necessary by welding to existing reinforcement etc complete all as specified and directed at site

M&L for providing and fixing wire netting of mild steel wire mesh of size 25mmx 25mm and 1.40mm dia fixed with tinned tacks of wire staples to existing old reinforcement whereever necessary in place of new reinforcement bars by welding for supporting the concrete including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

Cutting out existing cracks in surfaces forming grooves of 25mm x 40mm size cleaning the groove thoroghly with blower applying primer coat of water proofig epoxy coating as per manufacturer instruction with suitable brush to form a film on the surface of groove, filling the groove with polymer based grouting chemical as per manufacturer instruction and finally applying the sealing coat of the same grouting chemical is applied per running meter length of groove including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M&L for grouting in RCC concrete surfaces:- (a) Marking the areas of construction joint. (b) Fix 12mm dia PVC injection sockets upto 75mm depth at spacing of 1 mtr c/c (c ) Before injection grout compressed air shall be blown to remove all dirt & dust. (d) Inject grouting chemical at a pressure of 4 to 5 kg/sq cm (epoxy grouting) with pump using injectable consistancy manufacturers instructions till refusal of appearance of grout from adjacent including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M&L for pressure shortcreting 20-40mm thick in CM 1:3 to all affected area of RCC overhead reservior staging using 6mm aggregate downwards and including necessary scaffolding for the height from ground to bottom dome using polymer based shortcreting chemical @ 2% by weight of cement and finished the concrete surfaces at edges and corners and as directed by EIC. (Note : Shotcreating/guniting at a height up to appox of OHT)

M&L for applying two coats of polycrete R-1 manufactured by M/S Sika India Pvt Ltd/ M/S Fosroc Chemicals/ M/S Hindcon Chemical Limited or equivalent over polymer mortar plastering as protective curing coat complete all as specified and directed

M/L for taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as directed & specified by EIC.

M&L for applying epoxy based bonding materials as per manufacturer instruction to bind the old cement concrete with new cement concrete complete all as specified and directed

M&L for rendering 15mm thick on fair faces of concrete surfaces in cement mortar (1:3) using polymer based water proofing chemical @ 3% by weight of cement and finishing even & smooth without using extra cement including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge . Note chemical shall be measured and paid separately .

M&L for preparation of surfaces and applying two coat of good grade epoxy leak proof coating over primer surface on internal surface of domes including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M/L for painting to steel surfaces with two coats of synthetic enamel paint with preparation of surfaces over a coat of red oxide primer at any height

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for mild steel frame work as in grill, grouting etc ladder , railing and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Demolition of cement concrete (un reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level.

M & L 50mm thick cement concrete flooring type B-1, 1:2:4 using 20mm graged stone aggregate finished even and smooth with using extra cement complete

Glass dividing strips, 3mm thick, inserted in position, conform to design

Removal of debris concrete etc to a distance exc 250mtr but n exc 500 mtr complete as directed

M&L Preparation of old plainted surfaces of walls and applying two coats of cement base paint complete all as specified and directed at any height

M&l preparation fo new plastered surfaces of walls and applying tow coats of cement base paint over a coat cement wash with portland cement complete all as specified and directed at any height

M&L preparation of old steel painted surfaces and apllying a coats of synthetic enamel paint complete all as specified and directed at any height

M &L for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) mixed with polymer based waterproofing chemical @ 2% by weight of cement including including necessary scaffolding & formwork as required complete all as specified and directed by Engr-in-Charge (Note : chemical shall be measured and paid separately)

Supply only polymer base water proofing compound complete all as specified and directed.

Repairs of Over Head Tank ( 02 Nos) at Make up Pump house of FGK Kanpur :- For staging height 30m.

M& L for taking down/scraping out all loose and weak mortar or concrete by chiseling wire brush or any other pre applied mortar to expose the reinforcement including cement plaster from any height of RCC overhead tank complete all as specified and directed at site including erection of necessary scaffolding upto required height to carryout the work smoothly all as directed.

M&L for cleaning of corroded reinforcement bars throughly remove oil, grease heavy corroded/loose scale matter including cleaning the bars by wire brush and applying rust removing chemical polymer based on all exposed reinforcement bars complete as per manufactureres instructions including erection of necessary scaffolding upto required height to carryout the work smoothly all as directed . Note surface area of reinforcement to be treated only to be measured.

M&L for providing and fixing additional reinforcement of MS cold twisted deformed IS-1786 (or TMT bars) 8mm dia and over cut to length, bent to shape as required in places wherever necessary by welding to existing reinforcement etc complete all as specified and directed at site

M&L for providing and fixing wire netting of mild steel wire mesh of size 25mmx 25mm and 1.40mm dia fixed with tinned tacks of wire staples to existing old reinforcement whereever necessary in place of new reinforcement bars by welding for supporting the concrete including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

Cutting out existing cracks in surfaces forming grooves of 25mm x 40mm size cleaning the groove thoroghly with blower applying primer coat of water proofig epoxy coating as per manufacturer instruction with suitable brush to form a film on the surface of groove, filling the groove with polymer based grouting chemical as per manufacturer instruction and finally applying the sealing coat of the same grouting chemical is applied per running meter length of groove including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M&L for grouting in RCC concrete surfaces:- (a) Marking the areas of construction joint. (b) Fix 12mm dia PVC injection sockets upto 75mm depth at spacing of 1 mtr c/c (c ) Before injection grout compressed air shall be blown to remove all dirt & dust. (d) Inject grouting chemical at a pressure of 4 to 5 kg/sq cm (epoxy grouting) with pump using injectable consistancy manufacturers instructions till refusal of appearance of grout from adjacent including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M&L for pressure shortcreting 20-40mm thick in CM 1:3 to all affected area of RCC overhead reservior staging using 6mm aggregate downwards and including necessary scaffolding for the height from ground to bottom dome using polymer based shortcreting chemical @ 2% by weight of cement and finished the concrete surfaces at edges and corners and as directed by EIC. (Note : Shotcreating/guniting at a height up to appox of OHT)

M&L for applying two coats of polycrete R-1 manufactured by M/S Sika India Pvt Ltd/ M/S Fosroc Chemicals/ M/S Hindcon Chemical Limited or equivalent over polymer mortar plastering as protective curing coat complete all as specified and directed

M/L for taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as directed & specified by EIC.

M&L for applying epoxy based bonding materials as per manufacturer instruction to bind the old cement concrete with new cement concrete complete all as specified and directed

M&L for rendering 15mm thick on fair faces of concrete surfaces in cement mortar (1:3) using polymer based water proofing chemical @ 3% by weight of cement and finishing even & smooth without using extra cement including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge . Note chemical shall be measured and paid separately .

M&L for preparation of surfaces and applying two coat of food grade epoxy leak proof coating over primer surface on internal surface of domes including necessary scaffolding as required complete all as specified and directed by Engr-in-Charge

M/L for painting to steel surfaces with two coats of synthetic enamel paint with preparation of surfaces over a coat of red oxide primer at any height

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for mild steel frame work as in grill, grouting etc ladder , railing and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Demolition of cement concrete (un reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level.

M & L 50mm thick cement concrete flooring type B-1, 1:2:4 using 20mm graged stone aggregate finished even and smooth with using extra cement complete

Glass dividing strips, 3mm thick, inserted in position, conform to design

Removal of debris concrete etc to a distance exc 250mtr but n exc 500 mtr complete as directed

M&L Preparation of old plainted surfaces of walls and applying two coats of cement base paint complete all as specified and directed at any height

M&l preparation fo new plastered surfaces of walls and applying two coats of cement base paint over a coat cement wash with portland cement complete all as specified and directed at any height

M&L preparation of old steel painted surfaces and apllying a coats of synthetic enamel paint complete all as specified and directed at any height

M &L for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) mixed with polymer based waterproofing chemical @ 2% by weight of cement including including necessary scaffolding & formwork as required complete all as specified and directed by Engr-in-Charge (Note : chemical shall be measured and paid separately)

Supply only polymer base water proofing compound complete all as specified and directed.

Supply, laying, jointing, testing and commissioning 200 mm bore DI pipe of K-9 classification conforming to IS 8389-2000 with spigot and socket end centrifugally cast in any length laid in trenches including testing of pipe line after laying complete all as specified and directed by Engr-in-charge.

Supply and fixing sluice valve 200 mm dia bore cast iron both end flanged with CI wheel Stain less Steel spindle including fixing arrangement class PN-1.6 suitable for 200 mm bore DI pipe with all fittings such as rubber gasket sheet, washer, nut & bolt etc; complete all as specified and directed by Engr-in-charge

Supply and fixing sluice valve 80 mm dia bore cast iron both end flanged with CI wheel Stain less Steel spindle including fixing arrangement class PN-1.6 suitable for 80 mm bore DI pipe with all fittings such as rubber gasket sheet, washer, nut & bolt etc; complete all as specified and directed by Engr-in-charge.( for pumps)

M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 32x6 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering and 40 mm dia light grade for protection of earth strip charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified, complete all as specified and directed by Engr-in-charge

M&L air termination single pointed Aluminum rod 12mm dia & 300mm long complete all as specified and directed by Engr-in-charge

Supply & fix aluminium strip 25 mm x 3.15 mm on wall , roof & ground etc. complete with saddles, and fixing screws complete all as specified and directed by Engr-in-charge

Supply and fix epoxy insulators 25 mm dia base with suitable screws complete for fixing AL strip if size 25x3.15 mm complete all as specified and directed by Engr-in-charge

Supply & lay GI strip 32x6 mm in ground complete includuing necessary drilling interconnections with suitable size |GI Nut bolts and washers complete all as specified and directed by Engr-in-charge

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including three nos 8 mm dia 25mm long hexonagal head screws complete all as specified and directed by Engr-in-charge

Material and labour Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed by Engr-in-charge

5. M&L GI tubing medium grade 50mm dia for air termination complete all as specified and directed by Engr-in-charge

Supply and fix aviation light LED with aluminum housing and polycabonate enclosure make Bajaj cat No, BGAV 302 LED product code 110731 or equivalent in Wipro / Philips. complete all as specified and directed by Engr-in-charge

M & L for Sub main wiring with two runs of 1.5 Sqmm FR PVC insulated unsheathd 1100 V grade multistranded Copper conductor single core wire and and one run of 1.5 Sq mm cable as earth wire incl rigid non metallic PVC conduit and its all accessories of suitable size but not less tahn 25 mm dia,complete all as specified and directed by E-in-Charge( Note- 3 runs of 1.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length). complete all as specified and directed by Engr-in-charge

S & F MCB DB SPN with Suiable 6 A 240 V MCB -01 No. complete all as specified and directed by Engr-in-charge

M&L construction of brick masonry valve pit chamber size 950x950x 950 mm (internal dimension) with 6 mm thick MS sheet cover and angle iron frame of 40 x 40 x 6mm with hinges complete including locking arrangement including 50 mm size brass 6 lever lock of make Godrej / Link as approved and necessary excavation & earth work & painting with one coat of primer and two coats of synthetic enamel paint on mild steel work internal and external surfaces complete all as specified and directed by Engr-in-charge.

M & L for cutting extg CI Pipe 200 mm dia inserting tee of size 200x200x200 mm incl all lead joints Tee and excavation complete all as specified and directed by Engr-in-charge

M & L for PCC 1:2:4 type B1 ( with 20 mm graded stone agrregate) in foundation and filling in road cut surfaces. complete all as specified and directed by Engr-in-charge

Supply and fix NRV cast iron , ISI marked , pressure rating PN-1.6 double flangd complete as per IS-5312 ( part-1) 2004 for Pump set of size 200 mm dia with ISI mark incl hardware and packing material complete all as specified and directed by Engr-in-charge.

M & L fittings suitable for CI pipes S/S or flanged pipes bends , tapers, tees any type incl collars caps plugs etc of size upto 200 mm dia pipes. complete all as specified and directed by Engr-in-charge

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in loose /soft soil for laying of pipe / cable complete all as directed by the Engr-in-Charge

Retuning, filling in and including spreading, levelling, watering and well ramming in trenches around pipe and in cloumns n exc 25 cm thick layers in soft / loose soil complete all as directed by the Engr-in-Charge

Removal of surplus excavated soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as directed by the Engr-in-Charge

Demolition of cement concrete of any description for laying of pipes/cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Providing PCC work will be measured and paid separately under relevant items. complete all as directed by the Engr-in-Charge

Supply and fix microprocesssor based on 3 wire interfacing system between OH Tank sensor to main water level indicator unit showing in percentage by seven segment LED display complete with all accessories data acable transmiter and antena OH tank all as specified and didrected

J.B.ENTERPRISES

N.P.BUILDERS