REPAIR / MAINT OF HIGH MAST LIGHTS, FLOOD LIGHTS, GATE/GARDEN LIGHT, POST TOP LIGHT AND MISC LIGHTING SYSTEM AT ITARANA MIL STN UNDER GE ALWAR

Amount

Disconnecting and taking down the street light fitting/Flood light fitting from the pole and repair of street light fitting of any type, capacity & make by replacement of unserviceable spare parts & making the fitting functional and refixing after repairs complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking down High Mast light from the steel tower and repair of High Mast fitting of any type, capacity & make by replacement of spare parts & making the fitting functional and refixing after repairs complete all as specified and directed by Engineer-in-Charge. Note for item No. 1 & 2 : (i) Spare parts/accessories required to be replace shall be measured and paid seperately as "supply only" under the relevent items. (ii) Scope of work including for minor stores ie. PVC insulation tap, screw, insulation sleeve, nut bolt & washer and flexible cable 2.5 sq mm. (iii) Any complaint measured one time in same location/pole/light during contract period. No extra payment will be made for repeating complaint on same location during contract period. (iv) Contractor shall be depute daily two Nos mistry/electrician in MES office (MRS) for receiving and rectify the complaint. (v) The rate including all the T&P of i.e. ladder/vehicle/required for execution of work shall be arrange by the contractor.

Supply only for repairs surge protection device (SPD) for LED street light fitting (45-60) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (45-60) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs surge protection device (SPD) for LED street light fitting (72-90) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (72-90) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs surge protection device (SPD) for LED street light fitting (100-150) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (100-150) watt complete all as specified and directed. Make : Bajaj/Philips/Shakti/CG/Polycab.

S&F in repair for 2.5 sqmm, PVC insulated, Round Sheathed, twin core alluminium Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, from street light feeder/junction box to street light fittings complete all as specified & directed.

S&F in repair for 2.5 sqmm, PVC insulated and FRLS PVC Round Sheathed, twin core Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, from street light feeder/junction box to street light fittings complete all as specified & directed.

S&F in repair for 6 sqmm PVC insulated & sheathed single core copper conductor cable repair for street light feeder panel /junction box/re-wiring fitting-fixtures etc complete all as specified & directed.

M&L in repairs for rigid steel conduit, welded of 20 mm dia for protection of wire fixing on pole as required with 2 Nos clamps complete all as specified and directed by Engr-in-Charge.

S&F in repairs street light bracket made to shape at required angle made out of 40 mm dia ( light grade ) GI tubing of length not less than 1.2 m long suitable for fixing /holding street light fittings including mild steel flat iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified & directed.

S&F in repairs decorative gate light made up of high grade unbreakable (MUSHROOM PRISMATIC) polycarbonate material including 10W LED Lamp B22 base including taking down of old U/S light complete all as specified and directed. Make: Havells/Crompton/Bajaj/Philips

S&F in repair for pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size 300x200x100 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable complete all as specified and directed.

Replacement of old unsv & Supply, Installation, commissioning and testing of Lithium based energy integrated solar street light 40 Watt in single metal/FRP body encases solar panel 44/46Wp monocrystalline, Lithium ferro phosphate battery, solar panel and charger built into the luminaire 11.1/12.8V, 42AH with inbuilt BMS, High brightness W-LED (160-180 lm/watt) lamp, CRI>0, Colour temperature 6500K, microcontrollerbased charge controller cum driver, automatic dimming function with PIR motion senor, Dusk to down operation, working temperature: (-) 10C to (+) 55C, weight: 10-12 kg, with adjustable MS clamp, bracket suitable for pole/wall mounting, Pprotaction: Short circuit, overload, Reverse polarity and battery protections complete all as specified. NOTE- (i) Firm should give warranty for the complete fitting including all Electric/Electronics connected parts for minimum 5 years. (ii) The complete documents regarding warranty shall be handed over to the GE at the time of execution of the items. In turn contractor may obtain. Warranty/ Extended warranty from the manufacturer for the above period. Make : Philips/Havells/Bajaj /surya /CG or its equivallent approved by the GE.

Repairs to Street light panels and Nature switch by replacement of unserviceable electric items such as Timer, contactor, MCB, MCCB, busbar etc wiring of suitable size copper conductor cable single core etc and setting of timer including dismantling of unserviceable parts. Note : Spare parts measured and paid seperately under the relevent item as "Supply only"

Supply& fixing in repairs MCB SP 6 to 32 Amps , 230 Volts, AC complete all as specified and directed. Make : Havells/HPL/C&S.

Supply only electric contactor 3 pole suitable for (25-40) Amps 240 Volts AC complete all as specified and directed. Make : L&T/ Siemens/C&S/BCH.

Supply only Astronomical time switch Digital type for street light 240 volts , 50 Hz complete all as specified and directed. Cat pt No. T2DDT8 Make : L&T/ Havells/C&S.

M&L for painting of APFC/LT/SL panel board of any sizes with one coats of synthetic enamel paint smoke grey including preperation of old painted surfaces by scrapping of old surface and making good surface complete all as specified and directed.

M&L for earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc. as shown in electrical plate No. 3 of SSR Part-I and connection to main switch board/test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus soil to a distance not exc. 50m, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm bore for watering and 15mm bore 3m long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shallb e provided o CI frame etc.complete all as specified & as directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S&F in repairs/replacement of PCC pole by steel tubular swaged pole 09 meter long type 410 SP-31 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number and including dismantling and taking down old unserviceable pcc pole 09 metre long complete all as specified and directed. Note : (i) Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately. (ii) Serviceable street light fitting and pole mounted junction box taking out from us pole and same refixing the new pole.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable complete all as specified and directed. Make : Havells/Grandlay/Polycab. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

All as per serial item No 26.00 here-in-before but of cross sectional area 16 sqmm 2 core.

All as per serial item No 26.00 here-in-before but of cross sectional area 6 sqmm 2 core.

Excavation in trenches n. exc. 1.5Mtr width n.exc 1.5 Mtr in depth for laying of cables & foundation of poles, stay assembly and getting cut in any type of soil complete all as specified and directed.

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M/L for brick work with FLY ASH BRICKS as Per IS-13757(1993) burnt clay fly ash building bricks, with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

Returning, filling in including spreading levelling , watering and well ramming in layers not exc. 25cm in any type soil complete all as specified and directed.

Removing of surplus excavated soil to a distance not exc. 50m and depositing where directed at a levelnot exc 1.5 Mtr abovethe starting point complete all as specified and directed.

M&L for Galvanized iron tubing, 40 mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, or fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

S&F in repairs LED street light fitting 100 watt 230V AC for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED'S with secondary optics and IP66 protection efficiencyof 110/120 lumen per watt along with 10kv surge protection device including all fixing accessories complete all as specified and directed. Make : Crompton RAPTOR NEO Cat No- TRP-411-100-57-SL-GL-NSG /Havells/Bajaj/Philips

All as per item ser No. 36.00 here-in-before but of cap 120 Watt complete all as specified and directed. Make : Crompton RAPTOR NEO Cat No- TRP-411-120-57-SL-GL-NSG /Havells/Bajaj/Philips

S&F in repairs LED flood light 150 Watt 230 volt AC outdoor type made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP-66 protection with efficiency 120 lumens per watt alongwith 10kv SPD including all fixing accessories complete all as specified and directed. Make : Crompton SPECTACLE Cat No- TFS-510-150-57-60D-HL2-LM-NGG /Havells/Bajaj/Philips

All as per item ser No. 38.00 here-in-before but of cap 200Watt complete all as specified and directed. Make : Crompton SPECTACLE Cat No- TFS-511-200-57-60D-HL2-LM-NGG /Havells/Bajaj/Philips

S&F repairs post top lantern LED type 20 watt 230V AC outdoor type IP-65 protection corrosion resistant complete with driver and lamp complete all as specified and directed. Make : Crompton-Cat No-LPTH-20-CDL/Havells/Bajaj/Philips.

M&L for flexible steel spring pipe, 25 mm dia for protection of wire fixing on pole as required complete all as specified and directed by Engr-in-Charge.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation of stay assembly & poles and similar works complete all as specified and directed. Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in mass concrete for pole complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 20 mm graded stone aggregate in coping concrete for pole all as directed by Engineer-in-Charge.

S&F in repairs of 10 sqmm 2 core twin flat alumiium conductor sevice cable complete all as specified and directed by Engr-in-Charge.

S&F in repairs of 6 sqmm 2 core twin flat alumiium conductor sevice cable complete all as specified and directed by Engr-in-Charge.

S&F in repairs street light fittings MONARCH, cast iron pole 4mtr height, antique copper colour, incl 2x40 watt LED light bowl type incl 2.5 sqmm pvc copper cable connecting to LED lamp and base of wiring pole is provided with 3 Nos of hot dip galvanised type anchor bolts incl earth work and PCC 1:3:6 C2 using 40 mm graded stone aggregate as in foundation size 45x45x150cm for poles. Make : Havells/Bajaj/Philips/Halonix

S&F in repairs decorative colour of 3 mtr length having pole material GI PU painted pipe and light material as polycarbonate acrylic of length as per Halonix Cat Part No HLDC-45-75-TRI-3M with rated voltage and frequency 240V 150 Hz, system voltage 75W ±10%, system current <0.382mA power factor >0.90 colour out put suffron, white & green (Tiranga colour with same sequence) and driver efficiency ≥80%. Base plate of the pole light shall be of dia 300mm and thickness 12mm PCB hole 260mm dia & 25mm dia light shall be mounted on a half feet PCC plaster, properly fixed with plate and foundation bolts complete all as specified and directed. Make : Halonix/ Havells/ Bajaj/ Philips/Crompton

DEMROT ELECTRICAL WORKS (BID ID -3445961)

M/s Yash Electrical and Maintenance (BID ID -3445274)

Shiv Enterprises (BID ID -3451394)