GE/BENG/16 OF 2020-21 REPAIR TO ROOF, JOINERY, FLOORING, SANITERY FITTINGS INCLUDING PERIODICAL SERVICES AT BH UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.

Dismantling of plain, trapezoidal or corrugated steel sheets any gauge, thickness including Nanital or similar pattern in roof coverings/ ridge all as directed.

S&F for 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls, etc. fixed with L-type or J-type hook bolts in roof coverings complete all as specified and directed.

Ditto all as item no. 3.00 but except sheet fixed with L-type or J-type hook bolts in roof coverings complete all as specified and directed.

S&F AC two pieces adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J -type hook bolts in roof coverings complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

Dismentling of timber scantlings 40 sq. cm and over in any section in any position in framed work such as truss frame all as directed.

M&L for 2nd class hard wood as in scantling, clean sawn, in unframed work all as specified and directed.

Ditto Item no 9.00 above but, if in repairs or if refixed in old position except new wood for Truss frame all as directed.

M&L for Dismantling Ditto in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section etc complete all as specified and directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails sectional area exceeding 13 sqcm but not exceeding 25 sqcm all as specified and directed.

Ditto Item no 12.00 above but, if in repairs or if refixed in old position except new wood for perlin and rafter all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance with pieces, cleats etc and fabrication works all as specified and directed.

M&L for rolled mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc all as specified and as directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square head one end each screwed other end to be fitted with washers and one hexagonal or square nut, 11 to 15 mm dia, exc 22.5cm and n exc 30cm long complete all as specified and directed.

Dismantling wall/ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Ditto item no 20.00 above but fixing only.

S&F 4 mm thick plain Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium frame-work with screws

Ditto item no 22.00 above but fixed in repair only.

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed

Taking down old unserviceable shutters of any description exc 1 but n.exe 2.00 Sqm each and removing materials from the site of work complete all as directed

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides knil seasoned and chemically pressure treated with antitermited complete all as specified and directed.

S&F 2nd class HW factory made 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or 12mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F Steel window with side shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded as specified and directed.

S&F Steel window with side shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bar, dovetailed or welded as specified as directed.

S&F in repair steel ventilator with top hung shutter including hinges steel peg stay complete.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 75 mm thick butt hinges, heavy weight, stainless steel and fixed complete all as specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be approved by Garrison Engineer as in frame, shutters for Door/Windows / Ventilators, fixed/openable/sliding or any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-chargeshall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F standard anodized aluminium section and shall be approved by Garrison Engineer as in frame for partition, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth and particle board, etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories required to be provided for partition as per directions of Engineer-in-chargeshall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F Prelaminated particle board 9mm thick, interior grade, prelaminated both sides with decorative choice laminations , fixed with screws or joining cleats to aluminium frame work complete all as specified and directed.

S&F 5.50mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed

S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F mortice lock, brass body, 4 lever, 75 mm size, vertical type with two keys, complete all as specified.

Dismentling floor hearth or wall tilling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), as in skirting, Kitchen platform /dado etc laid over 10mm thick cement screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing complete all as specified and directed.

M&L for Non Skid ceramic tiles (colour) 7 to 8 mm thick, (square / rectangular) area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and directed.

All as per item No.59.00 above here-in-before but in vertical surfaces such as dado/skirting complete all as specified and directed.

M&L for Non Skid ceramic tiles (colour) 7 to 8 mm thick, (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and directed

M&L Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed

S&F Hard stone coloured tile of size 600 mm x 600 mm x 16 mm thick in floors etc set and and jointed in neat cement slury and pointed in white or colored cement to match etc complete all as specified and directed.

Diito item no 63.00 above but as in skirting.

Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level complete all as directed.

M&L for 75 mm thick PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregate for plinth protection, fair finished all as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) for plinth protection, base of flooring fair finished all as directed.

M&L for 75 mm thick PCC (1:4:8) type C1 using 20 mm graded crushed stone aggregate as in sub basse of flooring all as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for PCC (1:3:6) type C1, using 20mm graded crushed stone aggregate as in hold fast, copping etc including necessary form work fair finished of exposed surfaces of concrete and making good with existing surfaces complete all as specified and as directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, footpath, etc. including 20mm thick screed bed or bedding layer of morter 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in surface channel & drain including form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc all as directed.

Add or deduct from item no. 75.00 above for each 25 mm girth or part thereof over or under 30cm

Demolition of cement concrete in reinforced Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L providing RCC 1:2:4, type B1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing RCC 1:2:4, type B1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L reinforced cement concrete 1:2:4, type B1 using 20 mm graded crushed stone aggregate in Chajjas complete all as specified and directed.

Use and waste of rough finished Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Use and waste of rough finished Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L TMT bars (Fe-500/ Fe-550D) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item no. 87.00 above but except brick in moduler size burnt bricks

M&L Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Ditto all as per item no. 89.00 above but except brick in moduler size burnt bricks built in CM 1:4.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 with water proofing compound as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid seperately in relevant item of Sch 'A' /BOQ).

M&L Rendering 10 mm thick of CM 1:4 on ceiling surfaces other than fair faces of brick work and surfaces finished even and smooth without using extra cement complete all as directed.

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement complete as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

M&L for applying one coat of white washing (Lime wash white) including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on ceiling surface including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coat of wall care putty on wall including preparation of surface with sand paper etc. to obtain smooth surface and applying two coat of distemper oil emulsion, white or tinted over a coat of primer complete as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soots, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or plaster of paris and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed.

M&L complete removal of existing treatment of plastered/unplastered surfaces of walls and applying two coat of distemper oil emulsion, white or tinted complete as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soots, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or plaster of paris and applying two coat of plastic emulsion paint, white or tinted complete all as specified and directed.

M&L preparation of new plastered surfaces of wall, etc and applying two coat of cement base paint over a coat of cement primer complete as specified and directed.

M&L preparation of old plastered surfaces of wall, etc and applying one coat of cement base paint complete as specified and directed.

M&L complete removal of existing treatment of old plastered/unplastered surfaces of wall, etc and applying two coat of cement base paint complete as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soots, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or plaster of paris and applying one coat of exterior weather proof paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden surfaces including necessary preparation of surfaces complete all as specified and directed.

M&L for treating small articles such as stops, covers, hold fast etc area not exc 0.1 sqm each and treated with tar, coal tar or black paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel surfaces of any description over 10 cm in width or girth including preparation of surfaces.

Dismantling water tanks exc 250 ltr but not exc 500 ltr and removing from site etc complete all as specified and as directed.

Dismantling water tanks exc 500 ltr but not exc 1000 ltr and removing from site etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair of Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20 mm iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair of Ball brass valves,high pressure, with polythene float and flynut complete, screwed for 20 mm bore iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down steel tubing and connections of any grade, 15mm bore complete as specified and keeping serviceable pipes in safe custody for reuse in the work complete all as directed.

Taking up or down steel tubing and connections of any grade, 20mm bore complete as specified and keeping serviceable pipes in safe custody for reuse in the work all as directed.

Taking up or down steel tubing and connections of any grade, 25mm bore complete as specified and keeping serviceable pipes in safe custody for reuse in the work as directed.

Re-fixing of serviceable galvanised iron tubing 15mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained item No above complete as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

Re-fixing of serviceable galvanised iron tubing 20mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained from item No above complete as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

Re-fixing of serviceable galvanised iron tubing 20mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained from item No above complete as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 25mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for bran ferrule complete as specified and directed.

S&F in repair 15mm Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered “hot” or “cold” with long screwed shank and fly nuts screwed for iron pipe complete as specified and directed.

S&F in repair brass chromium plated swivel shower rose 125 mm size complete all as specified and directed.

S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

M&L Vitreous China wash down water closet pan (pedestal pattern, European type), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. complete including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, ccomplete all as specified and directed.

Supply and fix, Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. (Make: Hindware or Parryware)

S&F in repair vitreous china wash hand basin, white, flat back, size 500mmx400mm with countersunk type includings, 32 mm waste coupling C.P. and PVC waste pipe 32 mm bore, 750 mm long etc including a pair of MS brackets and cutting for pinning in ends of brackets but including chain and plug and porcelain stopper complete all as specified and directed.

S&F in repair sinks made of stainless steel 0.8 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S&F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 litr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections pipe, 15mm dia size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

Taking down PVC drain pipes ( any size or pattern) including all fittings head shoes etc complete all as directed

S&F 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed on wall complete all as specified and directed.

S&F 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trances or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) junction T, (single T), equal or unequal 110mm dia with acess door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore fixed in position complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, upto 100mm bore jointed in cement mortar and taking out of trenches, if required

S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed.

S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast complete all as specified and directed.

S&F 75mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 etc. complete all as specified and directed.

Desludging of 100 mm dia sewage line by roading or by other means from adjacent manhole complete all as directed.

All as per item No.155.00 above here in before but 150 mm.

All as per item No. 155.00above here in before but 200 mm.

Cleaning of blocked pipe from Floor trap/ Nahani trap, Gully trap, water closet upto First Manholes by removing the sludge/ mud for smooth functioning including cleaning of all and replacing in position old Floor trap & Gully trap Covers complete all as specified and directed.

All as per item No.158.00 here in above but from manhole of depth exc 30 cm but n exc 100 cm

All as per item No. 158.00 here in before but from manhole of depth exc 100 cm and n exc 200 cm

Cleaning & clearing of septic tank mechanically with combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fiber braided water jetting hose and through conical/round shape nozzler pipe and flushing after cleaning including removing the deposited sludge/ solid/ liquid material, outside MD land, complete all as specified and as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 87814.00 (refer Tender Srl Page No 40). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

SHRI S K BHATTACHARJEE

J.K.ROY & SONS

BISWAJIT SAHA

M/S BOSE CONSTRUCTION

MUKHERJEE ENTERPRISE

J T ENTERPRISE

T K GANGULY

M/S SEN CONSTRUCTION

M/S JANATA CONSTRUCTION