External Development works such as Security Cabin, Toilet Block, Electrical room, Street light, Power distribution, CCTV, Drain, Culvert, Genset and Transformer Platform for Plug and Play and Warehouse at Mega Leather Park Panapakkam

Solid panel PVC door with frame

Civil Works

Part - R - Genset Platform 2

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers. Foundation and Basement.

Construction of INSPECTION CHAMBER CLEAR SIZE 0.60 X 0.60 including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the SIPCOT Officer as per standard specification.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill,

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and

Basement.

plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Ground Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Above Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Below Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.(Above Plinth)

Foundation and Basement

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Below Plinth

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT Officer in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the SIPCOT Officer.

Part - S - Transformer Platform 1

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the SIPCOT Officer. - Mixing by mechanical means

Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle etc. complete and as directed by SIPCOT Officer

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (Above Plinth)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete (Below Plinth)

Supply of HT Earth Discharge Rod etc. complete and as directed by SIPCOT Officer

Part - T - Transformer Platform 2

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete and as directed by SIPCOT Officer

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officer with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officer.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Civil Works

Part - R - Genset Platform 2

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers. Foundation and Basement.

Providing 52mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel,

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill,

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and

Basement.

plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Ground Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Above Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Below Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.(Above Plinth)

Foundation and Basement

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Below Plinth

thread lining, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officer)

Part - S - Transformer Platform 1

Finishing the top of roof with one course of machine pressed tiles of following size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOT Officer

Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle etc. complete and as directed by SIPCOT Officer

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (Above Plinth)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete (Below Plinth)

Supply of HT Earth Discharge Rod etc. complete and as directed by SIPCOT Officer

Part - T - Transformer Platform 2

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete and as directed by SIPCOT Officer

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officer with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officer.

Part B - Security Cabin 2

Civil Works

Part - R - Genset Platform 2

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers. Foundation and Basement.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officer)

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill,

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and

Basement.

plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Ground Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Above Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Below Plinth)

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.(Above Plinth)

Foundation and Basement

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Below Plinth

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officer.

thread lining, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officer)

Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle etc. complete and as directed by SIPCOT Officer

Supply of HT Rubber hand gloves as per the norms etc. complete and as directed by SIPCOT Officer

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete and as directed by SIPCOT Officer

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the SIPCOT Officer. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officer - Mixing by mechanical means

Supply of Metallic Danger Board as required by the Electrical Authorities as per the norms etc. complete and as directed by SIPCOT Officer

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

LT Cable and End Termination Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Paving the floor with best quality Vitrified Tiles of Size : Variety : Double Charged 600 x 600 x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the SIPCOT officers. (The make and brand of the tiles should be got approved by SIPCOT Officer before use on works)

Anti skid - Ceramic Tiles of size 305 x 305 x 6mm

Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc., complete and as directed by SIPCOT Officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the SIPCOT Officer.

Part - C - Toilet Blocks

Part A - Security Cabin 1

Supplying and fixing in position 110mm dia best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the SIPCOT Officer

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officer.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) at all levels

Supply, installation, & commissioning of 33kV HT Double Pole Structure with Vertical/ Horizental Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns, Anti climbing Device , ACSR conductor etc. complete as per technical specifications, scope of works, approved drawings etc. complete as directed and approved by SIPCOT Officer.

Part - D - Security Cabin 1

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

HT Metering Sets with METERING BOX: Supply, installation, testing & commissioning HT Metering Sets with 33KV metering cubicles set with 33 KV metering cubicles for HT consumers with 0.2S class 33 KV CTs & PTs bushings, connecting bus bars, control cables duly terminated suitable for supply energy measurement system for indoor as well as outdoor application etc. complete as directed and approved by SIPCOT Officer.

Part - D - Security Cabin 1

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

Electrical Works

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT Officer in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the SIPCOT officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directedby the SIPCOT Officers.

33kV HT TRANSFORMERS Supply, installation, testing & commissioning of 1600 kVA, 33 kV / 433 V Outdoor OLTC ((As per ISI 1180-Level 1) with Copper winding, Energy Efficient Level - 1 oil immersed air cooled, core type continuous rating, outdoor distribution transformer with copper winding for voltage ratio 33 KV/433 volts . The transformer shall be supplied with suitable HT Cable Entry Boxes , Copper Extension for Cable End Termination for HT & LT sides suitable Cable Entry Boxes or provission for connecting Bus-duct, Bucholz Relay,Marshaling Box etc. contained in a mild steel plain & radiator cooled tank, conforming to IS 1180 (Part I) with on-load tap changing switch for ±10% on L.V side and ±5 % on H.V.side. The transformer shall be supplied with first filling of oil and consisting of all the fittings and accessories such as Inspection cover, Oil level indicator with minimum and filling level markings, on load circuit tap changing switch with locking device & keys, H.V. Terminals- Bushings, L.V. Terminals cable box, Rating plate, Two earthing terminals, Two lifting hooks etc complete as per IS 1180 (Part I) and thereafter etc. complete as directed and approved by SIPCOT Officer SIPCOT officer.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the SIPCOT Officers.(The make, quality and colour of paint should be got approved by the SIPCOT Officer bef

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

Supplying and making outdoor cable end termination for33KV 3X400 sq.mm HT Cable with the heat shrinkable HT cable joint kit consists of right-angle/straight boots, wrap-around sleeves, insulation tape, butyl sealant, constant force spring, clamps, tinned copper braids, etc.. complete as directed and approved by SIPCOT Officer.

DG Set Supply, erection, testing, commissioning of 1500kVA, 415 V, 3 phase, 50 Hz, DG Set With AMF Panel suitable for synchronisation with diesel engine at 1500 RPM coupled with alternator mounted on a channel iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosu

4core x 16 sq.mm. Ar. Al. UG cable

Supplying and fixing in position 110mm dia best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the SIPCOT Officer

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officer.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) at all levels

Supply, installation, & commissioning of 33kV HT Double Pole Structure with Vertical/ Horizental Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns, Anti climbing Device , ACSR conductor etc. complete as per technical specifications, scope of works, approved drawings etc. complete as directed and approved by SIPCOT Officer.

Part - D - Security Cabin 1

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

re , control panel, inter connecting control cable, cable end termination, including lubrication system, cooling system, all inclusive. Diesel Generator Set with acoustic enclosure, Exhaust Pipe with Silencer conforming to CPCB II Norms or as per the latest norms and BIS Specifications or as per the latest environment (protection) rules, etc.complete as directed and approved by SIPCOT Officer.

Part - D - Security Cabin 1

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

Electrical Works

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT Officer in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the SIPCOT officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directedby the SIPCOT Officers.

33kV HT TRANSFORMERS Supply, installation, testing & commissioning of 1600 kVA, 33 kV / 433 V Outdoor OLTC ((As per ISI 1180-Level 1) with Copper winding, Energy Efficient Level - 1 oil immersed air cooled, core type continuous rating, outdoor distribution transformer with copper winding for voltage ratio 33 KV/433 volts . The transformer shall be supplied with suitable HT Cable Entry Boxes , Copper Extension for Cable End Termination for HT & LT sides suitable Cable Entry Boxes or provission for connecting Bus-duct, Bucholz Relay,Marshaling Box etc. contained in a mild steel plain & radiator cooled tank, conforming to IS 1180 (Part I) with on-load tap changing switch for ±10% on L.V side and ±5 % on H.V.side. The transformer shall be supplied with first filling of oil and consisting of all the fittings and accessories such as Inspection cover, Oil level indicator with minimum and filling level markings, on load circuit tap changing switch with locking device & keys, H.V. Terminals- Bushings, L.V. Terminals cable box, Rating plate, Two earthing terminals, Two lifting hooks etc complete as per IS 1180 (Part I) and thereafter etc. complete as directed and approved by SIPCOT Officer SIPCOT officer.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the SIPCOT Officers.(The make, quality and colour of paint should be got approved by the SIPCOT Officer bef

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

Supplying and making outdoor cable end termination for33KV 3X400 sq.mm HT Cable with the heat shrinkable HT cable joint kit consists of right-angle/straight boots, wrap-around sleeves, insulation tape, butyl sealant, constant force spring, clamps, tinned copper braids, etc.. complete as directed and approved by SIPCOT Officer.

DG Set Supply, erection, testing, commissioning of 1500kVA, 415 V, 3 phase, 50 Hz, DG Set With AMF Panel suitable for synchronisation with diesel engine at 1500 RPM coupled with alternator mounted on a channel iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosu

3core x 16 sq.mm. Ar. Al. UG cable

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT Officer in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Part - E - Security Cabin 2

Supply, transport to site, unloading, storing, Installation with all necessary supports, testing & commissioning of Sandwich type Maintenance free busduct Rating : 3200A,4P 65kA SC for 1 sec Configuration : 3P4W (100% N) with Copper conductors Indoor/Outdoor type, dust and vermin proof transformer/switchgear ends & necessary locations as directed at the site from floor, ceiling, wall etc., The bus duct shall have suitable flange at ends to connect with Transformer, DG sets Main LT Panel. System-415V, 3Phase, 4Wire with 100% Neutral and integral 1/2 Earth, Degree of Protection: IP55(Indoor) & IP65 with canopy (Outdoor). The rate shall be included End box, flange connection, wall frame assembly, Phase cross chamber, horizontal & vertical connection, all required bends, end feed, adaptor boxes, flexible links with lugs for termination at the transformer end and LT panel end, supports, angles etc. included 2RX50X10mm GI. flat for Earth busbar interconnecting wiring etc., all inclusive. etc. complete as directed and approved by SIPCOT Officer.

Part - E - Security Cabin 2

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

Part - E - Security Cabin 2

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.

White washing two coats

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only complete etc.complete as directed and approved by SIPCOT Officer.

ore use on works.)

1 PHASE UPS: Supply erection, testing, commissioning of The UPS shall be 1 Phase, 3 kVA, 230 V,50 Hz , online PWM with IGBT, suitable for continuous duty as per IEC/IS standards, delivering regulated, distortion-free, uninterrupted power with ≥90% efficiency at full load. It shall include comprehensive protections, audible alarms for fault and low-battery, and SMF lead-acid batteries of reputed make providing minimum 1-hour backup at full load. The system shall be complete with input/output MCBs, neutral link, double earthing as per IS 3043, and all required cabling and accessories for safe and reliable operation etc,. complete as directed and approved by SIPCOT Officer.

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

Supplying and making outdoor cable end termination for33KV 3X400 sq.mm HT Cable with the heat shrinkable HT cable joint kit consists of right-angle/straight boots, wrap-around sleeves, insulation tape, butyl sealant, constant force spring, clamps, tinned copper braids, etc.. complete as directed and approved by SIPCOT Officer.

DG Set Supply, erection, testing, commissioning of 1500kVA, 415 V, 3 phase, 50 Hz, DG Set With AMF Panel suitable for synchronisation with diesel engine at 1500 RPM coupled with alternator mounted on a channel iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosu

3c x 16 sq.mm. Ar. Al. UG cable

Part - F - Toilet Blocks

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for Foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer. For Foundation and Basement

Supply and run of 50mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT officials

Supply and run of 75mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Brick work inCement Mortar 1:6 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for following floors including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer. Superstructure in Ground floor

Supply and Run of 2 of No.8 SWG copper wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Part - G - Toilet Blocks

Plumbing Works

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., co

mplete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT officials before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

25mm dia Concealed line

32mm dia Concealed line

32mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT officials

110mm dia

Supply, installation, testing & Commissioning of Plate Earthing as per PWD standard with a copper earth plate of size 600X600X3mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer

Supply and run of 75mm x 10mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply and laying of 300mm dia RCC Hume Pipe with all acessories and civil work etc. complete and as directed by SIPCOT Officer

Supply of HT 33kV Rubber hand gloves as per the norms etc. complete and as directed by SIPCOT Officer

75mm dia

50mm dia

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including PDU and other accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the SIPCOT Officer.(The make, quality and colour of paint should be got approved by the SIPCOT Officer before use on works.)

Supplying and fixing in position SS Heavy Duty Long Body Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT officials before use on the works)

40mm dia

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT officials before use on the works)

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT officials .

Part - R - Genset Platform 2

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers. Foundation and Basement.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in

all floors complying with standard specification and as directed by the SIPCOT Officer

d 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT Officer before use on work

Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The make and brand of the tiles should be got approved by SIPCOT Officer before use on works)

Superstructure in Ground floor

Superstructure in First floor

Basement.

In Foundation and Basement

In Ground floor

In First floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Part - H - Pump Room Civil Work

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc., complete complying with standard specifications and as directed by the SIPCOT officers.(The EWC and flushing tank with all accessories should be got approved by theSIPCOT Officer Before Use on Wors).

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. Above Plinth

For plane surfaces such as vertical slab, side slabs of boxing,vertical drops, facia, vertical wall

Foundation and Basement

Supply & fixing of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth etc., complete and as directed by SIPCOT Officers.

Paving pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The make and brand of the tiles should be got approved by SIPCOT Officer before use on works)

Part - T - Transformer Platform 2

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the SIPCOT Officer.

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the SIPCOT Officer.(The make and brand of the tiles should be got approved by SIPCOT Officer before use on works)

Finishing the top of roof with one course of machine pressed tiles of of 230mm x 230mm x 16 mm to 18mm size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOT Officer

Part - S - Transformer Platform 1

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The wash hand basin and specials should be got approved by the SIPCOT Officer before use on works).

Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle etc. complete and as directed by SIPCOT Officer

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The make, quality and colour of paint should be got approved by the SIPCOT Officer before use on works.)

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete and as directed by SIPCOT Officer

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works. (Below Plinth)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the SIPCOT Officer. (The water closet should be got approved by the SIPCOT Officer before use on works).

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. RCC Column Below Plinth.

Providing additional Strutting to centering of R.C.C slab of all surfaces or any other form works required at site during execution of work for every additional 1 metre height or part there of but not less than 30 cm over the initial 3.60 mt height complete complying with the standard specification and as directed by the departmental officers.

with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area)

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

HT Metering Sets with METERING BOX: Supply, installation, testing & commissioning HT Metering Sets with 33KV metering cubicles set with 33 KV metering cubicles for HT consumers with 0.2S class 33 KV CTs & PTs bushings, connecting bus bars, control cables duly terminated suitable for supply energy measurement system for indoor as well as outdoor application etc. complete as directed and approved by SIPCOT Officer.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area)

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

Electrical Works

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the SIPCOT Officer in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying, Fabrication & Fixing of Eaves Gutter made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., all complete, as directed by the SIPCOT Officers. (make SAIL / JSW / Tata Bhushan)

SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by SIPCOT Officer.

Supply and Laying of 6 Core Out doorOFC cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. etc.complete as directed and approved by SIPCOT Officer.

Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer. Foundation and Basement.

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer From Electrical Room VTPNDB to SPNDB.

Brick work inCement Mortar 1:6 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer.

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

Supplying and making outdoor cable end termination for33KV 3X400 sq.mm HT Cable with the heat shrinkable HT cable joint kit consists of right-angle/straight boots, wrap-around sleeves, insulation tape, butyl sealant, constant force spring, clamps, tinned copper braids, etc.. complete as directed and approved by SIPCOT Officer.

DG Set Supply, erection, testing, commissioning of 1500kVA, 415 V, 3 phase, 50 Hz, DG Set With AMF Panel suitable for synchronisation with diesel engine at 1500 RPM coupled with alternator mounted on a channel iron base frame, fuel tank of adequate capacity, starting batteries with leads, AMF panel, hospital type silencer, with acoustic enclosu

18 mm x 1.25 mm @ 0.417 kg/m and interlocking vertical section 40 x 18mm x 1.25mm @ 0.417 kg/m with necessary accessories such as rubber beading. Window W-1 of Size 1.50X1.50Mt

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying and filling in foundation, basement, etc with filling Stone dust/Quarry dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the SIPCOT Officers.

Brick work in Cement Mortar 1:6 using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with Class Designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive SIPCOT Officers.

Supply and installation of PVC Rigid Pipe 50mm (2") including laying charges in street light pole foundation for power cable entry. Complete, as per standard specification etc., complete and as directed by SIPCOT SIPCOT Officers.

Brick work in Cement Mortar 1:5 using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with Class Designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive SIPCOT Officers.

Supplying and fixing in position 150 x 100mm “P” or “S” stoneware gully trap ‘A’ grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the SIPCOT Officer before use on works.

Supply and fixing in position of best Indian make white

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever

In Foundation and Basement

In Ground floor

In First floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Part - I - Pump Room Electrical

LT Cable and End Termination. Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer. From Electrical room VTPNDB to SPNDB-

4core x 10 sq.mm. Ar. Al. UG cable

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works. Below Plinth

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Below Plinth

For plane surfaces such as vertical slab, side slabs of boxing,vertical drops, facia, vertical wall etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

For Square Column and

3.30 - 4.30 Height

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc., complete and as directed by SIPCOT Officers.

Supplying, Fabrication and fixing 7mm thick MS Chequrred plates with MS angle and flat supports as per required size as per the direction of site in charge, including cost of all materials, labours, tools, machineries etc complete.

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (Hoop iron reinforcement will be measured and paid for separately) Ground floor

Supply of HT Earth Discharge Rod etc. complete and as directed by SIPCOT Officer

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the SIPCOT Officer.(The make and brand of the tiles should be got approved by SIPCOT Officer before use on works)

Supply and run of 25mm x 6mm Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc., complete and as directed by SIPCOT Officers.

Part - S - Transformer Platform 1

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The wash hand basin and specials should be got approved by the SIPCOT Officer before use on works).

4.30 - 5.30 Height

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the SIPCOT Officer.

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms etc. complete and as directed by SIPCOT Officer

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Supply ,Excavation and laying of 300mm dia RCC Hume Pipe for electrical cable laying road crossing etc., complete and as directed by SIPCOT Officer

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officer.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Supplying and fixing of aluminium anodized natural color matt finish louvered glazed ventilator with the cuter frame of size 63.50x38.10 mm x 1.41 mm @ 0.818 kg/m and louvers with moving arrangements will be made with alu, channel of sizes 60 x 30 x 4 mm @ 1.27 kg/m with necessary glass panes for louvers 4mm thick aluminum "L" angles, screws, nails conveyance, scaffolding if any and power consumption charges required for fabrication wherever necessary with power drill to extent required and made good to the original condition after fixing etc complete complying with relevant standard specification. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1858/1962 of anodic film thickness for all sections. All the materials should be got approved by the EE before fixing in position as directed. Ventilator V1

1 PHASE UPS: Supply erection, testing, commissioning of The UPS shall be 1 Phase, 3 kVA, 230 V,50 Hz , online PWM with IGBT, suitable for continuous duty as per IEC/IS standards, delivering regulated, distortion-free, uninterrupted power with ≥90% efficiency at full load. It shall include comprehensive protections, audible alarms for fault and low-battery, and SMF lead-acid batteries of reputed make providing minimum 1-hour backup at full load. The system shall be complete with input/output MCBs, neutral link, double earthing as per IS 3043, and all required cabling and accessories for safe and reliable operation etc,. complete as directed and approved by SIPCOT Officer. LT Cable and End Termination.

Light and fan point wiring. Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLSH copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and open as required and ceiling with PVC accessories,ceiling rose and round sheet with flexible hose, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point etc.complete as directed and approved by SIPCOT Officer.

Power point wiring with GI box, socket & switch. Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed etc.complete as directed and approved by SIPCOT Officer.

Circuit main Wiring. Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by SIPCOT Officer.

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer

3.5core x 35 sq.mm. Ar. Al. UG cable

Supplying and fixing of two track aluminium glazed sliding window of anodize alu, natural color matt finish in all floors. All the two shutter with sliding arrangements the bottom section should have gutter arrangements so as to drain the water entering and made with extruded alu section for frame bottom track 61.85mm x 31.75 mm x 1.50mm @ 0.909 kg/m frame top and two slides 61.85 x 31.5mm x 1.50mm @ 0.784 kg/m shutter section top and bottom 40 x 27 mm x 18mm x 1.45 mm @ 0.607 kg/m vertical section 40 x

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

HT Metering Sets with METERING BOX: Supply, installation, testing & commissioning HT Metering Sets with 33KV metering cubicles set with 33 KV metering cubicles for HT consumers with 0.2S class 33 KV CTs & PTs bushings, connecting bus bars, control cables duly terminated suitable for supply energy measurement system for indoor as well as outdoor application etc. complete as directed and approved by SIPCOT Officer.

3.5core x 35 sq.mm. Ar. Al. UG cable

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

3.5core x 35 sq.mm. Ar. Al. UG cable

Supplying and fixing of two track aluminium glazed sliding window of anodize alu, natural color matt finish in all floors. All the two shutter with sliding arrangements the bottom section should have gutter arrangements so as to drain the water entering and made with extruded alu section for frame bottom track 61.85mm x 31.75 mm x 1.50mm @ 0.909 kg/m frame top and two slides 61.85 x 31.5mm x 1.50mm @ 0.784 kg/m shutter section top and bottom 40 x 27 mm x 18mm x 1.45 mm @ 0.607 kg/m vertical section 40 x

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

SPNDB: Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection etc.complete as directed and approved by SIPCOT Officer.

Light and fan point wiring. Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLSH copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and open as required and ceiling with PVC accessories,ceiling rose and round sheet with flexible hose, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point etc.complete as directed and approved by SIPCOT Officer.

Circuit main wiring. Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by SIPCOT Officer.

SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable on wall with earth etc.complete as directed and approved by SIPCOT Officer.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the SIPCOT Officer.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the SIPCOT Officer. 110mm dia PVC Pipe

Light and fan point wiring Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLSH copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and open as required and ceiling with PVC accessories,ceiling rose and round sheet with flexible hose, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point etc.complete as directed and approved by SIPCOT Officer.

Brick work inCement Mortar 1:6 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer.

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

Supplying and making outdoor cable end termination for33KV 3X400 sq.mm HT Cable with the heat shrinkable HT cable joint kit consists of right-angle/straight boots, wrap-around sleeves, insulation tape, butyl sealant, constant force spring, clamps, tinned copper braids, etc.. complete as directed and approved by SIPCOT Officer.

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer

Light Fixtures and fan. Supply, installation, testing and commissioning of 40W, 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply and run of 2of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT SIPCOT Officer

T Cable and End Termination. Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer

Painting with two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, priming coat and including necessary plaster of paris putty, wherever required etc., complete at alllevels complying with standard specification. and as directed by the departmental officers (paints and its shade shall be got approved from the EE before using)

Design, manufacture, supply, erection, testing and commissioning of 415 V streetlight service feeder pillar panel 1200mm x 900mm x 300mm suitable for outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, with 2 coat of primer and 2 coats of aluminium finish with 1no. 100A A TPN MCCB with 25 kA breaking capacity in the incoming and 6nos 32 A, TPN contactor 6nos. 32A TPN MCB, 9nos, of 6-32A SP MCB as outgoing, automatic dawn and dusk with cyclic timer control for street light outgoing and adequate plate to terminate suitable cable as incomer and suitable cable as outgoing. energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital multifunctional meter with RS485 port and suitable CT etc. including the pillar to be erected with suitable angle iron frame pedestal with concrete grouting etc., complete and as directed by officers.

3c x 10.Sq.mm. cu.cable

Part - J - Electrical Room

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of street lighting fixtures suitable for 120W LED street light fitting with cool day light, made out of pressure die cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive etc., complete complying with standard specifications and as directed by SIPCOT officers.

Design, manufacture, testing and inspection at places of manufacturer, and supplying, delivery at site, unloading, storing, transporting directly to site or through transit stores as the case may be, installation, final painting, testing and commissioning of street lighting fixtures suitable for 80 W LED street light fitting with cool day light, made out of pressure die cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Upto Plinth / Basement.

4core x 16 sq.mm. Ar. Alu. UG cable ( For street light pole )

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed Size :600 x 450 mm x 5.5mm thick mirror of followingsize , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT Officer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT Officer before use on works).

4core x 16 sq.mm. Ar. Alu. UG cable ( For street light pole )

3.5core x 50 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable and refilling the earth to make good etc., complete and as directed by SIPCOT SIPCOT Officers.

4core x 16 sq.mm. Ar. Alu. UG cable ( For street light pole )

3.5core x 50 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT Officer before use on works).

Supplying and fixing position PVC Nahani Trap of size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT Officer before use on works)

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the SIPCOT Officer before use on work.

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete and as directed by SIPCOT SIPCOT Officers.

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPCOT Officer before use on work

Painting New Plastered Wall Surface with Two finishing coats of ready mixed Exterior plastic emulsion paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the SIPCOT Officer.(The make, quality and colour of paint should be got approved by the SIPCOT Officer before use on works.)

Part - K - Electrical Room Internal Electrical

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Cement Concrete 1:4:8 (One Cement, four crushed stone sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the SIPCOT Officers -Mixing by mechanical means

Part - L - External Street Light

Supplying and erection of 10m Free Standing Double Arm Bracket 8 sided Octagonally continuously tapered structured pole galvanized iron coated (GI) with minimum coating of not less than 65-75 micron, with 170mm bottom A/F & 70 -90 mm at top A/F made up of 3mm thick HT sheet along with base plate of size 300 x 300 x 12mm thick including 4 Nos of M24X750mm high "J" type EN8 grade foundation bolts along with template and 1.5mtr long hot dip galvanized Single / double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top of 70mm A/F and including Bakelite sheet with 1 No 6A SP MCB and stud type connector suitable for 4CX25Sqmm cable etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying and erection of 8m Free Standing single Arm Bracket Single Bracket Pole with Base Plate Octagonally continuously tapered structured pole galvanized iron coated (GI) with minimum coating of not less than 65-75 micron, with 130mm bottom A/F & 70mm at top A/F made up of 3mm thick HT sheet along with base plate of size 250x250x12mm thick including 4 Nos of M24X750mm high "J" type EN8 grade foundation bolts along with template and 1.5mtr long hot dip galvanized Single / double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top of 70mm A/F and including Bakelite sheet with 1 No 6A SP MCB and stud type connector suitable for 4CX25Sqmm cable etc., complete complying with standard specifications and as directed by SIPCOT officers.

Streetlight pole foundation cost 8m & 10m Pole

Power point wiring with GI box, socket & switch Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed etc.complete as directed and approved by SIPCOT Officer.

Circuit main wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by SIPCOT Officer.

SPNDB:( LDB & PDB ) Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution b

oard with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable in wall with earth etc.complete as directed and approved by SIPCOT Officer.

1 PHASE UPS: Supply erection, testing, commissioning of The UPS shall be 1 Phase, 3 kVA, 230 V,50 Hz , online PWM with IGBT, suitable for continuous duty as per IEC/IS standards, delivering regulated, distortion-free, uninterrupted power with ≥90% efficiency at full load. It shall include comprehensive protections, audible alarms for fault and low-battery, and SMF lead-acid batteries of reputed make providing minimum 1-hour backup at full load. The system shall be complete with input/output MCBs, neutral link, double earthing as per IS 3043, and all required cabling and accessories for safe and reliable operation etc,. complete as directed and approved by SIPCOT Officer.

SPNDB:( ELDB ) Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable in wall with earth etc.complete as directed and approved by SIPCOT Officer.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 63A 4P MCB as incoming and 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection etc.complete as directed and approved by SIPCOT Officer.

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid) Below Plinth

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basement.

Light and fan point wiring Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLSH copper conductor of 1100 V grade in suitable PVC/MS rigid pipe concealed in wall and open as required and ceiling with accessories,ceiling rose and round sheet with flexible hose, Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point etc.complete as directed and approved by SIPCOT Officer.

In Ground floor upto 3.6m Ht

Power point wiring with GI box, socket & switch Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC/MS conduit pipe Concealed in wall and open as required with accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed etc.complete as directed and approved by SIPCOT Officer.

Light Fixtures and fan. Supply, installation, testing and commissioning of 20W, 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Plinth / Basement Level

Part - M - External Power Distribution

Main MV power panel: The work includes design, manufacture, supply, erection, testing, and commissioning of a Main Power Panel suitable for 415V, 3 Phase, 4 Wire system, for indoor/outdoor use. The panel shall be fabricated from 2 mm thick CRCA steel with a weatherproof canopy, double-door construction, IP55 protection, anti-corrosive finish, and dust/vermintight, floor-mounted cubicle design with undrilled gland plates. It shall include complete internal wiring, ferrules, nameplates, locking system, tinned copper busbars with heat-shrinkable sleeves, SMC support

s, rated 3200A, 65kA, TPN, 50Hz, with 100% neutral and dual copper earth flats. The assembly shall comply with IEC 61439 (Part 1 & 2), type-tested. Incomer arrangement: 2 Nos. 3200A, 4P, 65kA drawout ACBs with one number spare ACB and 1 No. 630A, 4P, 65kA drawout ACB, motorized with microprocessor-based releases, protections, trip/close coils, UV release, interlocks, automatic shutters, FRP barriers, and individual metering. A Load Manager with RS485 and MDI controller shall be provided. The bus coupler shall be 1 No. 3200A, 4P, 65kA drawout ACB with identical features. Panel shall also include MCBs, RYB lamps,other indicator lamps control circuits, and individual energy meter for outgoing feeders. Out going:2no:1250A 50KA 4P ACB with Microprocessor based EDO Breaker 7Nos - 630A, 4 Pole 50kA, ACB Microprocessor Based, EDO Breaker 2Nos - 400A 36KA 4P Microprocessor based MCCB. 2Nos - 250A 36KA 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by engineer in-charge.

HT Metering Sets with METERING BOX: Supply, installation, testing & commissioning HT Metering Sets with 33KV metering cubicles set with 33 KV metering cubicles for HT consumers with 0.2S class 33 KV CTs & PTs bushings, connecting bus bars, control cables duly terminated suitable for supply energy measurement system for indoor as well as outdoor application etc. complete as directed and approved by SIPCOT Officer.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Plinth / Basement Level

Part - M - External Power Distribution

Main MV power panel: The work includes design, manufacture, supply, erection, testing, and commissioning of a Main Power Panel suitable for 415V, 3 Phase, 4 Wire system, for indoor/outdoor use. The panel shall be fabricated from 2 mm thick CRCA steel with a weatherproof canopy, double-door construction, IP55 protection, anti-corrosive finish, and dust/vermintight, floor-mounted cubicle design with undrilled gland plates. It shall include complete internal wiring, ferrules, nameplates, locking system, tinned copper busbars with heat-shrinkable sleeves, SMC support

s, rated 3200A, 65kA, TPN, 50Hz, with 100% neutral and dual copper earth flats. The assembly shall comply with IEC 61439 (Part 1 & 2), type-tested. Incomer arrangement: 2 Nos. 3200A, 4P, 65kA drawout ACBs with one number spare ACB and 1 No. 630A, 4P, 65kA drawout ACB, motorized with microprocessor-based releases, protections, trip/close coils, UV release, interlocks, automatic shutters, FRP barriers, and individual metering. A Load Manager with RS485 and MDI controller shall be provided. The bus coupler shall be 1 No. 3200A, 4P, 65kA drawout ACB with identical features. Panel shall also include MCBs, RYB lamps,other indicator lamps control circuits, and individual energy meter for outgoing feeders. Out going:2no:1250A 50KA 4P ACB with Microprocessor based EDO Breaker 7Nos - 630A, 4 Pole 50kA, ACB Microprocessor Based, EDO Breaker 2Nos - 400A 36KA 4P Microprocessor based MCCB. 2Nos - 250A 36KA 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by engineer in-charge.

33KV Outdoor Four Panel VCB: Supply, installation, testing, and commissioning of 33kV, 1250A, 25KA Outdoor Four Panel VCB complete system suitable for operation in outdoor conditions, including circuit breakers, isolators, current transformers (CTs), potential transformers (PTs), control cables, terminal connectors, and grounding equipment. Automatic circuit breakers with all protection,Manual or motorized, VCB Annunciator set as required with relevant national and international standards. The work includes all necessary materials, equipment, labor, and services required to complete the work as per the specifications. etc. complete as directed and approved by SIPCOT Officer.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Plinth / Basement Level

Part - M - External Power Distribution

Main MV power panel: The work includes design, manufacture, supply, erection, testing, and commissioning of a Main Power Panel suitable for 415V, 3 Phase, 4 Wire system, for indoor/outdoor use. The panel shall be fabricated from 2 mm thick CRCA steel with a weatherproof canopy, double-door construction, IP55 protection, anti-corrosive finish, and dust/vermintight, floor-mounted cubicle design with undrilled gland plates. It shall include complete internal wiring, ferrules, nameplates, locking system, tinned copper busbars with heat-shrinkable sleeves, SMC support

s, rated 3200A, 65kA, TPN, 50Hz, with 100% neutral and dual copper earth flats. The assembly shall comply with IEC 61439 (Part 1 & 2), type-tested. Incomer arrangement: 2 Nos. 3200A, 4P, 65kA drawout ACBs with one number spare ACB and 1 No. 630A, 4P, 65kA drawout ACB, motorized with microprocessor-based releases, protections, trip/close coils, UV release, interlocks, automatic shutters, FRP barriers, and individual metering. A Load Manager with RS485 and MDI controller shall be provided. The bus coupler shall be 1 No. 3200A, 4P, 65kA drawout ACB with identical features. Panel shall also include MCBs, RYB lamps,other indicator lamps control circuits, and individual energy meter for outgoing feeders. Out going:2no:1250A 50KA 4P ACB with Microprocessor based EDO Breaker 7Nos - 630A, 4 Pole 50kA, ACB Microprocessor Based, EDO Breaker 2Nos - 400A 36KA 4P Microprocessor based MCCB. 2Nos - 250A 36KA 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by engineer in-charge.

Circuit main wiring Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by SIPCOT Officer.

Light Fixtures and fan Supply, installation, testing and commissioning of 40W,industrial typy heavy duty 4ft LED light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.

Utility power panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates,Locking System with aluminium Busbar with heat shirnkable colour coded sleeve with SMC Bus bar supports with with 630A, 50 kA, TPN 50 Hz, bus bars.The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer incomer: 1Nos - 630A, 4P, 50kA Drawout type, motor operated ACB with Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil with Under Voltage releases, high speed closing feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker.Metering for Each Incomer: Load Manager with RS485 Interface with controller,automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase and other Indicating lamps and control circuit as required and emergy meter for out going feeders etc. Out going: 6Nos - 125A 36KA 4P Microprocessor based MCCB. 3Nos - 160A 36KA 4P Microprocessor based MCCB. 3Nos -250A 36KA 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by engineer in-charge.

Brick work inCement Mortar 1:6 using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officer. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officer.

Supply & Laying of 3 core 400 sq.mm.HT XLPE 33KV cable, insulated aluminium armoured cable in ground up to 1200 mm deep, 500 mm wide cable trench providing sand cushioning before and after laying cable and covering with half round Hume pipe and refilling the trench as per technical specification, approved drawings and scope of work etc. complete as directed and approved by SIPCOT Officer.

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting with earth connection etc. complete and as directed by SIPCOT Officer

Light Fixtures and fan Supply, installation, testing and commissioning of 40W, 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer

Supply and fixing of sheet steel enclosure for MCBs with 16A DP MCB, including all required connections for emergency lighting control, complete as directed and approved by the Engineer-in-Charge / SIPCOT SIPCOT Officer

LT Cable and End Termination Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer From Electrical room VTPNDB to SPNDB

Supply and run of 2of No.8 SWG GI. wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply of HT Rubber Mat installation size of 2m x 1m confirming to IS etc. complete and as directed by SIPCOT Officer

Light Fixtures and fan. Supply, installation, testing and commissioning of 40W, 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply and run of 2of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT SIPCOT Officer

Supply of First Aid Box complete with all First Aid Medicines etc. complete and as directed by SIPCOT Officer

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of 5MP PTZ IP Camera 360 Degree, 200m IR, IP66, Audio In / Out, Alerts, Auto Tracking Optical Zoom:30X,Field of View (Degree):360, suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the engineer in-charge.

3.5 core x 400 sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 300sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 240 sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 50 sq.mm. Ar. Alu. XLPE UG cable

Supply and Run of 3 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed position.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of approved make 4 Port POE Switch with SFP port for CCTV camera as per the recommended and approved by the engineer in-charge.

Supply, installation of CCTV pole size of 6 Metre Length with Base Plate with duly welding (MR), MS box of 30cm x 30cm x 10cm with angle iron frame work with lock and key arrangements including Concreting and masonary work for fixing the post all inclusive necessary supports for installation of CCTV camera etc.completion as per the recommended and approved by the engineer in-charge.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

In First floor

Supply and fixing of sheet steel enclosure for MCBs with 32A 4P MCB, including all required connections for emergency lighting control, complete as directed and approved by the Engineer-in-Charge / SIPCOT Officer.

Supply of Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer

Supply, installation, testing, commissioning of approved make 24Port POE Switch as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of 5MP PTZ IP Camera 360 Degree, 200m IR, IP66, Audio In / Out, Alerts, Auto Tracking Optical Zoom:30X,Field of View (Degree):360, suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the engineer in-charge.

3.5 core x 400 sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 300sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 240 sq.mm. Ar. Alu. XLPE UG cable

3.5 core x 50 sq.mm. Ar. Alu. XLPE UG cable

Supply and Run of 3 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed position.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the engineer in-charge.

Supply, installation, testing, commissioning of approved make 4 Port POE Switch with SFP port for CCTV camera as per the recommended and approved by the engineer in-charge.

Supply, installation of CCTV pole size of 6 Metre Length with Base Plate with duly welding (MR), MS box of 30cm x 30cm x 10cm with angle iron frame work with lock and key arrangements including Concreting and masonary work for fixing the post all inclusive necessary supports for installation of CCTV camera etc.completion as per the recommended and approved by the engineer in-charge.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

In First floor

Supply and fixing of sheet steel enclosure for MCBs with 32A 4P MCB, including all required connections for emergency lighting control, complete as directed and approved by the Engineer-in-Charge / SIPCOT Officer.

Supply of Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer

Supply, installation, testing, commissioning of Rack Mountable fully loaded 24 port Patch Panels with SC and LC connector as per the recommended and approved by the engineer in-charge.

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Cement Concrete 1:4:8 (One Cement, four crushed stone sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the SIPCOT Officers -Mixing by mechanical means

Part - N - External CCTV Arrangements Plug and Play

Part - N - External CCTV Arrangements Warehouse

Part - O - Storm Water Drain

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the SIPCOT Officer. 110mm dia PVC Pipe for One Floor

Supply, installation, testing, commissioning of approved make Patch Cord 2M as per the recommended and approved by the engineer in-charge.

Supply installation testing and commissioning of monitor display unit 3840 x 2160 (UHD), 78.1 - 83 (30.75" - 32.68") LED display with HDMI Port,USB 3.0/3.1/3.2/4 Port,USB Type C and necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the engineer in-charge.

Part - Q - Box Culvert

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Cement Concrete 1:4:8 (One Cement, four crushed stone sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the SIPCOT Officers -Mixing by mechanical means

Part - N - External CCTV Arrangements Plug and Play

Manufacturing, supplying and fixing in position Reinforcement concrete perforated precast slab of 100 mm thick in Cement Concrete M25 grade including cost of steel moulding charges, casting of slab, finishing, curing, placing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..( At pedestrian crossing)

Manufacturing, supplying and fixing in position Reinforcement concrete perforated precast slab of 125 mm thick in Cement Concrete M25 grade including cost of steel, moulding charges, casting of slab, finishing, curing, placing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..( At pedestrian crossing)

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM an

by the Department for the excess usage of materials). Foundation and Basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). (Below Plinth)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement 50 Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sal slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). Below Plinth

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals MS Channel Section (ISMC 100) shall be provided as a verticale support @1.20m C/C and with Lateral support of steel Adjustable Telescopic props of Size 2m x 2m (expandable up to 3.60m) & steel pipes of 20mm Dia @ required levels / spacing etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). (Below Plinth, verticle surface)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) at all levels

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Part - Q - Genset Platform 1

3.5core x 95 sq.mm. Ar. Alu. UG cable ( I/C to Feeder pillar box )

Supply & installation of Cable route markers made of galvanised CI circular 100 mm. dia. with "LT/HT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level etc., complete and as directed by SIPCOT Officers.

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (Hoop iron reinforcement will be measured and paid for separately) Ground floor

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The make, quality and colour of paint should be got approved by the SIPCOT Officer before use on works.)

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositin

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). (Below Plinth)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement 50 Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sal slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). Below Plinth

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals MS Channel Section (ISMC 100) shall be provided as a verticale support @1.20m C/C and with Lateral support of steel Adjustable Telescopic props of Size 2m x 2m (expandable up to 3.60m) & steel pipes of 20mm Dia @ required levels / spacing etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). (Below Plinth, verticle surface)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the SIPCOT Officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) at all levels

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Providing Plain Cement Concrete 1:3:6(One cement, three sand and six Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by SIPCOT Officer and as directed by SIPCOT Officer

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement K/Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical upport 1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia required level/spacing etc. complete complying with standard specifcation and as directed by the SIPCOT Officers. (Payment for centering shall be given after the concrete is laid) Below Plinth, Vertical Surface

Supply & installation of Cable route markers made of galvanised CI circular 100 mm. dia. with "LT/HT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level etc., complete and as directed by SIPCOT Officers.

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the SIPCOT Officer. (Hoop iron reinforcement will be measured and paid for separately) Ground floor

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the SIPCOT Officer. (The make, quality and colour of paint should be got approved by the SIPCOT Officer before use on works.)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete Below Plinth

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the SIPCOT Officers.

g the excavated earth with a lead of 10 mts. within the compound in places shown by the SIPCOT Officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the SIPCOT Officers. 0 to 2m depth

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basment.

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Brick work in In Cement Mortar 1:5 using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with Class Designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers Foundation and Basment.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the SIPCOT Officers. - Mixing by mechanical means

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers

necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Providing 52mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officers)

Providing and laying Cement concrete 1:4:8 (One of cement, four of sand and eight of hard broken stone jelly) for foundation using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the SIPCOT Officers.

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT Officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOT Officers.

Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the SIPCOT Officers.

g the excavated earth with a lead of 10 mts. within the compound in places shown by the SIPCOT Officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the SIPCOT Officers. 0 to 2m depth

Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation and Basment.

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Brick work in In Cement Mortar 1:5 using best quality II Class Ground Moulded Chamber Burnt Bricks of size - 9" x 41/2" x 3" with Class Designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the SIPCOT Officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the SIPCOT Officers Foundation and Basment.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the SIPCOT Officers. - Mixing by mechanical means

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers

necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Providing 52mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the SIPCOT Officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the SIPCOT Officers)

Providing and laying Cement concrete 1:4:8 (One of cement, four of sand and eight of hard broken stone jelly) for foundation using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the SIPCOT Officers.

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%