Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹8,400
Closing Date
28 Jun 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Visvesvaraya Technological University
Junior Engineer
Repair and Renovation of Canteen Building of VTU, Regional Centre, Mysuru.(Reserved for Schedule Tribe Category)
VTU/2025-26/OW/WORK_INDENT152
VTU/2025-26/OW/WORK_INDENT152
Reserved
Other Works
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
11 documents required · 11 mandatory
Mandating Satisfactorily Completing as a prime contractor for at least one similar work to an extent of 25% of the cost of the work of Rs. 1.68 Lakhs.
The Tenderers of his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling 2.00 Lakhs.
Achieved in at least one financial year a minimum financial turnover of Rs. 6.71 Lakhs
Reserved Category certificate Scheduled Tribe to be submitted.
PAN Card copy
GST registration Certificate
IT returns for last three years with balance sheets.
Class IV & above registration certificate
All other documents as mentioned in the bid document.
₹500
₹8,400
16 Jun 2025
16 Jun 2025
30 Jun 2025
27 Jun 2025
Repair and Renovation of Canteen Building of VTU, Regional Centre, Mysuru.
Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including ed...
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class
Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class
Providing and fixing Bidet spray made of Stainless steel with all concealed
fitting arrangements & all necessary accesories complete - Class
Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fit...
Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever...
Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender document.pdf
Tender Document • 1.76 MB
Drawing.pdf
Others - Drawing • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .