PROVN OF RAIN SHELTER ALONGWITH ONE TOILET ROOM NEAR SEGREGATE WASTE COLLECTION CENTRE SWCC AND CERTAIN OTHER SANCTIONED WORK UNDER GE BIRCHGUNJ

Amount

Surface dressing n exc 15 cm deep and getting out hard/Dense Soil complete all as specified and as directed.

Filling under floors or in foundations including watering and consolidation complete all as specified and as directed. Note Excavated soil shall be used fo filling

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft/disintegrated rock complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Back filling of retaining walls using approved earth obtained from excavation including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed

Removing excavated soils to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed

Removing excavated soils to a distance exc 50m and not exc 250 m depositing where directed at a level n exc. 1.5 m above the starting point all as directed

Excavation over areas n exc. 1.5m deep in Soft/disintegrated rock complete all as specified and as directed.

Material and labour Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 10cm thick, watered and rammed to a true surface complete all as specified and as directed

Excavation in Post Holes (or similar holes) each n exc 0.5 cu.m,getting out ,returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm ,watering ,and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Material and labour for TMT steel bars 8mm dia and over upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Material and labour for precast cement concrete solid building blocks Type B1 1:2:4 (20mm graded aggregate)or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and as directed

Material and labour for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 (using 12.5mm aggregate) to horizontal or vertical surface including necessary formwork all as specified and as directed.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc

M&L for 15mm thick external rendering in two layers of 5mm thick in CM 1:4 mixed with water proofing compound (water proofing compound shall be used as per manufacturer’s instructions) over a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid seperately

Supply only integral water proofing compound complete all as specified and as directed

Material and labour for rendering 10 mm thick in CM 1:6 finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and labour for Rendering 15mm thick with cement plaster in CM 1 :4 on concrete surfaces mixed with WPC @ 2% by weight of cement shall be carried out all as specified and directed by the Engineer-in-Charge. Note: Supply only WPC will be measured and paid seperately

Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat for rough finished surface of concrete complete all as specified and as directed

Use and waste for Formwork to faces of walls, retaining walls, abutments, parapets and similar work for rough finished surfaces complete all as specified and as directed

Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed

Use and waste for Formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed

Material and labour for RCC M30 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc and mass concrete complete all as specified and as directed

Material and labour for RCC M30 (Design mix) for Columns, pillars, piers, posts and struts of concrete etc complete all as specified and as directed

Material and labour for RCC M30 (Design mix) in Walls, retaining walls, basement walls and the like; any thickness complete all as specified and as directed

Material and labour for Reinforced cement concrete M30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed.

Material and labour applying two coats of acrylic emulsion paint extreior quality over a coat of primer (with antifungal properties) on external wall surfaces including preparation of old plastered surface etc. including complete removal of old treatment all as specified and as directed by Engineer - in -Charge.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Material and labour treating the bottom & sides of excavation @ the rate of 5 Lit of emulsion per Square metre of surface area

Material and labour ATT on top of earth filling @ 5 lits/Square metre complete all as specified and as directed

Material and labour for preparation of new plastered wall surfaces and applying three coats of white wash, complete all as specified and directed.

Material and labour for oil bound distempering two coats over a coat of primer including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

Material and labour for oil bound distempering two coats including preparation of surfaces old decorated, painted surfaces of wall including removal of existing treatment complete all as specified and directed by Engineer - in -Charge.

Material and labour for Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth, not otherwise described complete all as specified and directed by Engineer - in -Charge.

Material and labour for preperation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer including providing wall care putty complete all as specified and as directed by engineer-in-charge.

Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed.

Material and labour 75mm thick PCC 1:4:8 Type D-2 (using 40mm aggregate) as in plinth protection, sub base to floor complete all as specified and directed by Engineer - in -Charge.

Material and labour for .Coloured matt finish ceramic tiles joint free area exc 0.11 Sqm but exc 0.18 Sqm as in floor, set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:6, 15 mm thick, all as specified and directed

Supply and fix coloured glazed ceramic tiles 300mm x 200mm x 5.50 to 6mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat in cement mortar 1:4, 10 mm thick, complete all as specified and directed.

Material and labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed in cement mortar 1:6, 15 mm thick, all as specified and directed complete all as specified and directed by Engineer - in -Charge.

Supply and fix for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed by Engineer - in -Charge.

Supply and fix for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed by Engineer - in -Charge.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in -Charge..

Supply and fix Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in -Charge..

Supply and fix Multi rib TM profile high tensile 550 Mpa yeild strength colour coated galvalume steel sheet 0.50mm (TCT) thickness as in roof and wall cladding having maximum pitch of 250mm C/C and minimum 30mm crest depth in length as per site requitrement fixed with self drilling/ self tapping anti corrosive screws with EPDM seal complete all as specified and directed by Engineer - in -Charge.

All as per item No 48 here in before but as in ridge / valley gutter with plain sheet

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 5.5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fix 150mm long extruded aluminium alloy anodised handles fabricated type

Supply and fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long

Supply and fix Aluminum anodised butt hings 100 mm long extruded aluminum, alloy with galvanised mild steel hinge pin, type C-22

Supply and fix rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

Supply and fix vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix vitreous China wash hand basin, 'OVAL TYPE' 550 mm including with single tap hole CP pillar cock of 15 mm dia brass CP chain and rubber plug, waste pipe and PVC connection complete all as specified and directed by Engineer - in -Charge.

Supply and fix PVC low level flushing cistern, 10 litres capacity, including PVC flush pipe of required length, 15 mm bore ball valve and PVC connection 300 mm and other accessories, complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/walls including jointing with solvent cement all as specified and directed by Engineer -In-Charge.

Supply and fix 75 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/walls including jointing with solvent cement all as specified and directed by Engineer -In-Charge.

Material and labour for UPVC 75 mm dia Nahani trap/floor trap with PVC grating complete all as specified and directed.

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Supply and fix for Soap dish, vitreous China white, approximate size 160 x 160 x 90mm embedded in the wall complete all as specified and directed by Engineer - in -Charge.

Supply and fix 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 20mm external dia CPVC Ball valves complete all as specified and as directed by Engineer-in-charge.

Supply and fix for 20mm bore UPVC pipes (concealed )of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed by Engineer - in -Charge.

Supply and fix 15 mm bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes in repairs all as specified and directed.

Supply and fix 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer - in -Charge.

Supply and fix 15 mm bore stop valve fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in -Charge.

Supply and fix in PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer - in -Charge.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100 mm thick as in sub base of foot paths, pavements etc finishing the surface even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazed, polished chequered cement concrete tiles 300 x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry, including creed bedding layer in cement mortar 1:6, 20mm thick, in flooring, complete all as specified and as directed by Engineer-in-Charge.

Material and labour Cement concrete in foundations, filling and mass concrete type D-2 1:4:8 (40mm graded aggregate) complete all as specified and directed by Engineer - in -Charge.

Material and labour Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer - in -Charge.

Material and labour pre-cast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and directed.

Demolition of Precast concrete articles, and PCC block walling built in cement mortar complete all as specified and directed

Material and labour for Boulder of guage 40 to 80mm filling dry, hand packed tightly as in weep holes complete all as specified and as directed.

Supply and fix PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia laid in trenches as in weep holes

Demolition of Reinforced cement concrete in any description and in any position not otherwise specifically provided all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Supply and fix Framed work Fe 410-W (Gde E-250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

Supply and fix Mild steel bolts exc 12mm n' exc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and directed

Supply and fix Plates plain channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 410-W(Gde E-250) quality B all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets complete all as specified and directed

M&L for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with E board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting any gauges thickness incl nanital or similar pattern roof coverings complete all as specified and directed

Supply and fix 0.71mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (with out taking off shutters from the frame) complete all as specified and directed.

All as per item No 97 herein before but exc 1.5 n exc 4 sqm each.

Supply & fix in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete

Supply and fix Butt hinges, Size of hinge 100mm extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21

Supply and fix floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level

Material and labour PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, of 75 mm thick finished fair and even complete all as specified and directed

Material and labour 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases, complete all as specified and directed

Material and labour for 7 to 8 mm thick Non skid glazed ceramic tiles(Joint free) , area of each tile exc 0.18 sqm but n exc 0.38 Sqm in floors laid over 15mm thick screed bed cement mortar 1:6 set and jointed in cement slurry and pointed with coloured or white cement to match with exisiting surface all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 10mm thick screed bed in CM 1:4 complete all as specified and directed

Material and labour for Glazed ceramic tiles of size 350 x 250 x 7mm or 450mm x 350mm x 7mm thick on vertical surfaces such as in dado/skirting and rendering in CM 1:4 10mm thk on fair faces of wall surfaces etc, all as specified and as directed by Engineer-in-Charge.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors finished with white cement and pigment complete all as specified and directed

Material and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 30 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specificed and as per directed by Engineer-in-Charge.

Material and labour for application of high build polymer cement sand mortar 1:3 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed by Engineer-in-Charge. [ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck]

M & L for taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises and apply water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing 3to 4Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note:- Water proofing compound shall be measured and paid separately)

Material and labour for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab mixed with water proofing compound. (Note : Supply only WPC shall be measured & paid separately)

Supply and fix Fe 410-W (Gde-E- 250)quality-A mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc. and keeping in safe custody for taking credit including making good disturbed surfaces of walls, ceilings etc

Material and labour Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc. for One light/fan point controlled by one switch all as specified and as directed

All as per Item No 116 here in before but One 3 pin switch socket outlet point 5 amps on same board with other switches.

All as per Item No 116 here in before but One 3 pin switch socket outlet point 5 amps on independent board.

All as per Item No 116 here in before but for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm copper conductor cable and earth continuity conductor, complete all as specified and as directed

Supply and fix energy efficient LED Smart bright batten 20 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make :Wipro/ Bajaj/Philips/Crompton.

Supply and fix Switch piano, flush button, single pole, ISI marked, one way 5 Amps 240 volts

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as directed

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed

Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz, 100 watts, complete all as specified and as directed Make:-Anchor/Havells/Bajaj

Dismantling and taking down ceiling fan 1200 mm sweep and refixing/connecting up each including provision of cable from ceiling rose or connector to fan after cleaning all dust etc complete all ad directed.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make: Philips Cat No BN021C LED20S PSU CDL/NW GR or eqvt make of Bajaj/Wipro.

Supply & fix LED bulb hold type non dimmable 10 watt complete all as specified and as directed. Make: Phillips/ Havells/Wipro

Supply and fix in repair sheet metal enclosure distribution board SPN, 8 way 240 volts, with 200 Amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed. Make: Legrand/ Havells/ L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix ventilating fan suitable for on working of AC 230 V, 50 Hz 200 mm sweep ,incl louvers complete all as specified Make: Havells/Crompton/Orient/Bajaj

Material and labour for ceiling rose surface Bakelite 65 x 50mm 3 terminal complete all as specified and directed.

Supply and fix metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps complete all as specified and as directed by Engineer-in-Charge Make : Legrand/C&S/L&T

Supply and fix in repair MCB single pole and neutral, 240 volts, 6 to 32 amps C series complete all as specified and as directed by Engineer-in-Charge Make : Legrand/C&S/L&T

Supply, lay, test and commissioning of 2 Core 6 sq mm size UG XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 Volt

Material and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers, bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked complete all as specified and as directed.

Supply and laying of GI pipe 25mm dia, medium grade, including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of 25mm dia GM gate valve complete all as specified and as directed.

Supply and fix rotational moulded polythelene water storage tanks of size 1000 Ltrs capacity (cylindrical vertical with closed top) with tank cover (top), hoisted and fixed in position complete all as specified and as directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

Cutting existing 50mm GI line and making branch connection of 25 mm dia GI line complete and including fittings, connections etc all as specified and directed.

S K ENTERPRISES

M/S AMK CONSTRUCTIONS

RPG AND COMPANY

M/s Kamal Electrical

T.THIYAGARAJAN

Priya construction

Vandana Enterprises