REPAIR AND POLISHING OF WOODEN FURNITURE AND REPAIR AND PAINTING OF STEEL FURNITURE FOR SMQ AND O

Amount

WOODEN FURNITURE Chair writing : FD - 250, 280 Taking down carefully existing unserviceable seat frame from chair writing and S & F new seat frame made out of 2nd class hard wood duly caned with white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete over a coat of primer before canning complete all as shown on drawing. (FD-75M) as specified and as directed by Engineer-in-Charge. (Note:- Above drawing pertains to Srl item No 01 to 09 here-in-after.)

Taking out old damaged /decayed front leg from its position and S&F new front leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out old damaged /decayed Rear leg from its position and S&F new rear leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable stiffeners from chair writing and Supply and Fix new stiffener as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable arm rest from chair writing and Supply and Fix new arm rest made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' i with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable back rest from chair writing and Supply and Fix new back rest made of of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material and labour removal of old existing unserviceable cane from chair writing and recaning, with new white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 Complete and as shown on drawing.

Taking out unserviceable shoe from chair writing and Supply and Fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Chair dining : FD - 279 & 228 Taking out unserviceable rail from chair dining and Supply and Fix new rail made with 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 10 to 17 here-in-after.)

Taking out unserviceable front legs from chair dining and S&F new front leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable rear legs from chair dining and Supply and Fix new rear leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable side/centre stiffeners from chair dining and Supply and Fix new stiffener made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable back rest from chair dining and Supply and Fix new back rest made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable shoe from chair dining and Supply and Fix new PVC/hard rubber shoe approved quality complete all as directed by Engr in Charge.

Material and labour removal of old existing unserviceable cane from chair writing and recaning, with new white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 Complete and as shown on drawing.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Chair Easy : FD - 229 Taking out unserviceable rail/bead from chair easy and Supply and Fix new rail/bead made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 18 to 26 here-in-after.)

Taking out unservicable front legs from chair easy and S&F new front leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable rear legs from chair easy and Supply and Fix new leg as per existing shape & size in the same position made out of well seasoned '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' incl. hard rubber ring complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable seat frame from chair easy and supply and fix new seat frame made out of well seasoned 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects' of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear complete with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing..

Taking out unservicable back frame from chair easy and supply and fix new back frame made out of well seasoned 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable arm rest from chair easy and supply and fix new arm rest of size 65 x 25mm x 610mm made out of well seasoned 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material and labour removal of old existing unserviceable cane from chair writing and recaning, with new white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 Complete and as shown on drawing.

Taking out unserviceable shoe from chair easy and supply and fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Chair Wooden Bottom : Taking out of unserviceable side/rear/front rail from chair wooden bottom and Supply and Fix new rail made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note for Ser No 27 to 34 : Ref Drwg No FD-285)

Taking out unserviceable front legs from chair wooden bottom and Supply and Fix new front legs made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable rear legs from chair wooden bottom and Supply and Fix new rear legs made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable stiffeners from chair wooden bottom and supply and fix new stiffener made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable back rest from chair wooden bottom and Supply and Fix new back rest made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable ply from seat of chair wooden bottom and Supply and Fix new Ply 12 mm thick BWR of Make (Greenply/Archidply/Kitply) complete all as specified and shown on drawing.

Taking out unserviceable shoe from chair wooden bottom and supply and fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Bed ply top : FD - 246 Taking out old unservicable long rails from bed plywood top and S& F of new long rails made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 35 to 43 here-in-after.)

Taking out unserviceable ply wood teak face and Supply and Fix of new 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest complete all as spefied and shown on drawing.

All as per item No 36 here-in-before but size 780 x180 mm on both side foot boards rest complete all as spefied and shown on drawing. .

Taking out unserviceable plywood top from bed ply top and S&F new plywood 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 of size 1840x910mm complete all as per Drg (FD-245/246) or specified and directed by Engr-in-charge.

Taking out old unserviceable bottom rails of bed ply wood top and Supply and Fix of new bottom rails of made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out old unserviceable legs from head board of bed ply top and Supply and Fix new legs of head board made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out old unserviceable legs from foot board of bed ply top and Supply and Fix new legs of foot board made of '2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects for fixing of ply with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out corner S&F new corner made out of (25 x 5) mm MS flat Iron in 90 degree angle with suitable holes for fixing from the legs/rails with including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.Note:- Rate of nails required for corner shall be included in the quoted rate of this item.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

REPAIR TO TABLE DRESSING LADIES : FD - 23(M), 251 Taking out carefully old existing broken top of table dressing ladies and Supply and Fix replacing the same with new 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 44 to 54 here-in-after.)

Taking out carefully old existing broken bottom of table dressing ladies & Supply and Fix the same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out old mirror from table dressing ladies and Supply and Fix new glass mirror of size 366mm x 1220mm with 5.0mm thick sheet glass, ordinary quality complete and 6 mm thick plywood for back including two coats of French Polish to all exposhed parts complete and as specified.

Taking out old sliding glass shutter with aluminium sliding channel from table dressing ladies and supply and fix for new glass shutter of size 550mm x 380mm with 5.0mm thick, sheet glass Complete and as shown on drawing

Taking out back frame of mirror made out 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects alongwith 6mm thick commercial ply wood from table dressing ladies and Supply and Fix new back frame of size 45mm x 40mm made with 2nd class hard wood, mirror frame and 6mm thick commercial plywood and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out old unserviceable drawer of table dressing ladies and Supply and Fix new drawer with chromium plated knob complete all as specified and shown on drg.

Taking out unserviceable legs from table dressing ladies and Supply and Fix new legs made 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects complete all as specified and shown on drg.

Taking out old unserviceable long rail of table dressing ladies and Supply and Fix new long rail made 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects complete all as specified and shown on drg.

Taking out old unserviceable side /short rail of table dressing ladies and Supply and Fix new side/short rail made 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects complete all as specified and shown on drg.

Taking out old unserviceable back ply wood of box from table dressing ladies and Supply and Fix new 12mm commercial plywood complete all as specified and shown on drg.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

REPAIRS TO TABLE DRESSING GENTS : FD - 230/231 Taking out carefully old existing broken top of table dressing gents and Supply and Fix replacing the same with new 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 55 to 63 here-in-after.)

Taking out carefully old existing broken bottom of box of table dressing gents and Supply and Fix the same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out carefully old existing broken sides / partition of box of table dressing gents and Supply and Fix the same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable mirror from table dressing gents and Supply and Fix new mirror of size 380mm x 760mm x 5.0mm thick (Make : Modi-guard) and 6 mm thick plywood for back including two coats of French Polish to all exposhed parts complete and shown on drg.

Taking out old unserviceable back frame from table dressing gents and Supply and Fix new back frame of size 45mm x 40mm 2nd class hard wood, mirror frame and 6mm thick commercial ply grade BWR, type BB, complete all as specified and shown on drg.

Taking out old unserviceable back ply from table dressing gents and Supply and Fix new back ply of size 900mm x 380mm x 12mm thick commercial ply grade BWR, type BB, complete all as specified and shown on drg.

Taking out old unserviceable drawer of table dressing gents and Supply and Fix new drawer with chromium plated knob complete all as specified and shown on drg.

Taking out sagged and loose dressing table gents from wall and re-fix the same properly to wall with all accessories such as screw,clips, plugs, clamps, etc complete all as specified and shown on drg.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

TABLE WRITING : FD - 33/249/275 Taking out existing unserviceable top from table writting and new Supply and Fix the same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.. (Note:- Above drawing pertains to Srl item No 64 to 71 here-in-after.)

Taking out old unserviceable ply wood and chromium plated knobs from upper drawer of Table writing and Supply and Fix new ply wood 6mm thick and chromium plated knobs to the upper drawer, complete all as specified and shown on drg.

Taking out old unsersviceable long stiffner from table writing and Supply and Fix new stiffner made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out old unsersviceable Side stiffner from table writing and Supply and Fix new stiffner made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out old unserviceable cabinet of table writing and Supply and Fix new cabinet made Supply and Fix the same both side and bottom with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing , complete all as specified and as shown on drg.

Taking out old unserviceable shutter from table writing and Supply and Fix new shutter made of 18mm thick prelaminated MDF board exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board with teak wood beading duly fitted with suitable stainless steel hinges including one knob complete all as specified and as shown on drg

Taking out unserviceable shoe from table writing and supply and fix new PVC/hard rubber shoe complete all as specified and as shown on drg.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

SIDE BOARD : FD - 241 Taking out unserviceable top from side board and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note:- Above drawing pertains to Srl item No 72 to 80 here-in-after.)

Taking out unserviceable sides / vertical partition from side board and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable back ply wood 6mm from side board and Supply and Fix new commercial ply wood 6 mm thick confirming to IS: 303 BWR grade complete all as specified and as shown on drg.

Taking out unserviceable drawer ply wood from side board and Supply and Fix new commercial ply wood 6 mm thick confirming to IS: 303 BWR grade in drawers, complete all as specified and as shown on drg.

Taking out unserviceable knob from drawer of side board and Supply and Fix new chromimum plated knob in drawer of side board, complete all as specified and as shown on drg.

Taking out unserviceable shutters (measured as single unit) of the cup board from side board and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable bottom from side board and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable bottom frame and legs from side board and Supply and Fix new bottom frame and legs made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

TEAPOY WOODEN : (FD-278 & 382 ) : Taking out unserviceable top from teapoy wooden and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 81 to 87 here-in-after.)

Taking out unserviceable legs from teapoy wooden and supply and fix new legs made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable short rail from teapoy wooden and supply and fix new short rail made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable bottom rail from teapoy wooden and supply and fix new bottom rail made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable shoe from teapoy wooden and supply and fix new PVC/hard rubber shoe complete all as directed.

Taking out unserviceable long rail from teapoy wooden and supply and fix new long rail made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

TABLE CENTRE : FD - 274,235 Taking out unserviceable top from table centre and Supply and Fix same with new 18mm thick prelaminated MDF Board Exterior grade of ISI marked (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 88 to 92 here-in-after.)

Taking out unserviceable legs from table centre and Supply and Fix new legs made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable stiffener from table centre and Supply and Fix new stiffener made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable shoe from table centre and supply and fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Table Dining 6/8 Persons : FD - 273, 30(M) Taking out existing unserviceable top from table dining 8 person and Supply and Fix new top of table dining 8 Persons of size 1800 x 900 x 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 93 to 98 here-in-after.)

Taking out unserviceable leg from table dining 6/8 person and Supply and Fix new leg made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable corner from table dining 6/8 person and Supply and Fix new corner made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable shoe from table dining 6/8 person and Supply and Fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

All as per item No 93 but here-in-before for table dining 6 persons of size 1500 x 900 x 18/19 mm complete all as specified and as shown on drg.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Book Case : FD - 45 & 237 Taking out unserviceable back ply from book case and Supply and Fix new back ply of 6 mm thick commercial ply complete all as specified and as shown on drg. (Note:- Above drawing pertains to Srl item No 99 to 105 here-in-after.)

Taking out unserviceable sides / vertical partition from book case and Supply and Fix new sides / vertical partition of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unservicable top / bottom from book case and Supply and Fix new top / bottom made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable long horizontal shelf from book case and Supply and Fix new long horizontal shelf made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable doors and choromium plated knob from the book case and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable legs from book case and Supply and Fix new legs of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

TABLE BED SIDE : FD - 248, 276 Taking out unservicable top from table bed side and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note:- Above drawing pertains to Srl item No 106 to 112 here-in-after.)

Taking out unserviceable sides from table bed side and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unservicable bottom from table bed side and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unservicable shelf from table bed side and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable back ply from table bed side and Supply and Fix new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade complete all as specified and as shown on drg.

Taking out unserviceable leg from table bed side and Supply and Fix new leg made of 2nd class hard wood complete all as specified and as shown on drg.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Table 3' x 2' with/ without drawer : FD - 283, 284, 55 Taking out existing unserviceable top from table 900x600 with/without drawer and Supply and Fix new top of size 900 x 600 x 18 mm made of prelaminated MDF board exterior grade ISI marked (Greenpanelamax/Kitlam/Bhutan Board) with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note:- Above drawing pertains to Srl item No 113 to 119 here-in-after.)

Taking out unserviceable legs from table 900x600 and Supply and Fix new legs made 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable drawer from table 3' x 2' with drawer and Supply and Fix of new drawer made of 2nd class hard wood and 6 mm thick plywood BWR including chromium plated knob complete all as specified and shown on drg.

Taking out unservicable stiffener from table 3'x2' with/without drawer and Supply and Fix new stiffener made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out unserviceable shoe from table 3'x2' with/without drawer with new PVC/hard rubber shoe complete all as specified and shown on drg.

Supply and Fix of new MS flat in L shape 150 x 30 x 5mm thick with suitable holes to fix with legs and rails, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Table 3' x 3' (Wooden) : FD - 291, 88 Taking out unserviceable top from table 3'x3' and Supply and Fix new top of size 900 x 900 x 18 mm made of prelaminated MDF board exterior grade ISI marked (Greenpanelamax/Kitlam/Bhutan Board) with 4mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note:- Above drawing pertains to Srl item No 120 to 124 here-in-after.)

Taking out unserviceable legs from table 3'x3' and Supply and Fix new legs made of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable shoe from table 3'x3' and Supply and Fix new PVC/hard rubber shoe complete all as specified and as shown on drg.

Taking out unserviceable corner from table 3'x3' and Supply and Fix new corner made out of 150 x 30 x 5mm MS flat in L shape with suitable holes to fixing with legs/rails and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Sofa Set 5 Seater (3+1+1) : FD - 281 Taking out unservicable legs from sofa set 3 Seater / Single Seater front or rear legs and S&F new rear leg as per existing shape & size in the same position made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects with incl. hard rubber ring complete with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing . (Note:- Above drawing pertains to Srl item No 125 to 129 here-in-after.)

Taking out unservicable battens of seat and back from sofa set 3/Single seater and Supply and Fix new battens made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unservicable side rails from sofa set 3/Single seater and Supply and Fix new rails made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Material and labour for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothening of surfaces, filling of bore holes etc with wooden putty paste, Rubbing of surfaces with sand paper till smoothening and polishing with french polish glossy finished of repaired sofa 3 seaters and polishing of sofa 3 seater upto glossy finished all as directed by Engr - in- Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Hat Stand with mirror : FD - 233 Taking out old unserviceable looking mirror from hat stand with mirror and Supply and Fix new mirror 5mm thick of approved quality duly fixed with well seasoned bedding, complete all as specified and as shown on drg. (Note:- Above drawing pertains to Srl item No 130 to 135 here-in-after.)

Taking out old unserviceable brass peg from hat stand with mirror and Supply and Fix new brass peg approved quality duly fixed with Screw, complete all as specified and as shown on drg

Taking out old unserviceable back side ply from hat stand with mirror and Supply and Fix new ply wood 4 mm thick of commercial fixed with head less nail, complete all as specified and as shown on drg

Taking out old unserviceable front side Teak Face ply from hat stand with mirror and Supply and Fix new teak face ply wood 4 mm thick of commercial fixed with head less nail, complete all as specified and as shown on drg

Taking out old unserviceable beading from hat stand with mirror and Supply and Fix new beading made of first class hard wood teak of size 35 x 6mm all round, complete all as specified and as shown on drg

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Peg Table : FD - 236, 277 Taking out unserviceable top from peg table and Supply and Fix new top made of pre laminated MDF board exterior grade 18 mm thick with 4mm thick edging with width equal to thickness of board of made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note:- Above drawing pertains to Srl item No 136 to 141 here-in-after.)

Taking out unserviceable legs from Peg table and Supply and Fix new legs made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable short rail from Peg Table and supply and fix new short rail made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable Long rail from Peg Table and supply and fix new Long rail made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing

Taking out unserviceable shoe from Peg table and supply and fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Chair dining Officers: FD/MAP-II/04 Taking out unserviceable ply from seat of chair dining officers and Supply and Fix new Ply 12 mm thick BWR complete all as specified and shown on drawing. (Note:- Above drawing pertains to Srl item No 142 to 149 here-in-after.)

Taking out unserviceable back stiffener and supply and fix new back stiffener made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable rear leg from chair dining officers and supply and fix new rear leg made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable front leg from chair dining officers and supply and fix new front leg made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Replacement of unserviceable foam cushion,40 density, S & F new one duly covering with inner cover with new marking cloth superior quality and new tapestry cloth on top as outer cover chain type and cost of tapestry cloth not less that Rs 350/- Per Meter (Make Sleepwell) as approved by GE complete all as per Drg and as directed by Engr-in-charge.

Supply and fixing of new tapestry cloth cover with and including 75mm thick cushions of size as shown in drg approved quality with zip facility (tapestry cloth not less than Rs. 250/- per RM) of approved quality and shade duly stitched as specified and directed by Engineer in charge

Taking out unserviceable shoe from Chair dining officers and Supply and Fix new PVC/hard rubber shoe approved quality complete all as directed by Engr in Charge.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

STOOL DRESSING : (FD-252, 282):- Taking out unserviceable legs from stool dressing and Supply and Fix new legs made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing (Note for Srl No 150 to 155 : Ref Drwg No FD-252, 282)

Taking out unserviceable short rails from stool dressing and Supply and Fix new short rails made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable long rails from stool dressing and Supply and Fix new long rails made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable shoe from stool dressing and supply and fix new PVC/hard rubber shoe complete all as directed by Engr in Charge.

Material and labour removal of old existing unserviceable cane from stool dressing and recaning in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour Type-I (HDPE) as per IS: 5378-1994 .The caning shall be done only after repairing and polishing as stated above completer all as specified and as directed.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Bin Soiled Linen large / Small : (FD-244 ) Taking out unserviceable ply wood of door side from Bin Soiled linen large and Supply and Fix new 6mm thick ply wood of BWR grade, complete all as specified and as shown on drg (Note for Srl No 156 to 161 : Ref Drwg No FD-244)

Taking out unserviceable ply wood of .front / Back side from Soiled linen Large and Supply and Fix new 6mm thick ply wood of BWR grade, complete all as specified and as shown on drg.

Taking out unserviceable door frame from Bin Solid Linen large and Supply and Fix new door frame made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Taking out unserviceable leg from Bin Solid Linen large/small and Supply and Fix new leg made out of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material and labour removal of old existing unserviceable cane from Bin solid linen large and recaning in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour of Make ( Arya, Ajay & Supreme). The caning shall be done only after repairing and polishing as stated above completer all as specified and as directed.

Material and labour for applying two coat french polish glossy finish to all exposed wood surface after preparation of surfaces and applying wood filler wherever required complete all as specified & as directed.

Cushion/covers for Sofa Set : FD - 281 Taking out unserviceable cushion foam from sofa set and supply and fix new cushion foam of 100mm thick, 40 density approved quality complete all as specified and as directed. Make: Sleepwell/Comfort/SSF/Kurlon or equivalent make as approved . (Note:- Above drawing pertains to Srl item No 162 to 163 here-in-after.)

Covers for cushions as in item 162 above made out of tapestry cloth not less than Rs 300/- per meter as approved by engr in charge perfectly fitting the cushions and duly fitted with zipper to secure the covering/uncovering the cushion and complete all as specified and as directed.

STEEL FURNITURE CHAIR WRITING,CHAIR VISITORS:-FD/E6/MAP/12 & TP Removing unserviceable seat, S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick along with the fabric of approved quality & color. All as directed by Engr-in-Charge. (Note:- Above drawing pertains to Srl item No 164 to 168 here-in-after.)

All as per serial item No.164 here-in-before but for back of chair.

Removing unserviceable hand rest, S & F new hand rest replacing the old matching the previous all in shape,size,material & quality all as directed.

Removing unserviceable rubber stoppers, & S & F new rubber stoppers as approved. All as directed.

M & L painting all over the chair writing, chair visitor with one coat synthetic enamel paint of black colour and applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing one coat of primer complete all as specified and directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL WITH SHELVE FD-1031, FD-67(M) Removing unserviceable shelve, S & F new shelve with appropriate nuts and bolts complete all as specified and directed. (Note:- Above drawing pertains to Srl item No 169 to 179 here-in-after.)

(f) Taking out and removing existing unserviceable damaged lock from its position of almirah (Medium/Large steel) and S & F new 6 liver steel lock as per existing shape and size as approved with Keys in duplicate complete all as specified and as directed (Make :- HARRISON/LINK/GODREJ/RINA)

Removing the old unserviceable/broken handle of Almirah large steel with shelves/Almirah medium steel with shelves/Locker bed side steel and supply & fixing new CP brass handle best quality as approved by GE as per drg and as directed by Engr-in-charge. (FD-1031,1032 & TP)

Removing unserviceable locking assembly, S & F new locking assembly with cover duly painted complete all as directed.

Removing unserviceable hanging rod, S & F new hanging rod 20 mm dia, 1.6mm thick CP steel conduit pipe with sockets all as directed.

Taking out and removing the old damaged bottom leg (right/left) from its position and S & F new bottom leg made out of 20 gauge plain black steel sheet (PBI Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st quality) over a coat of red oxide primer complete all as specified and as directed.

Taking out loose shelf from its position of Almirah large/medium steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed

Removing of existing unserviceable hinges from Almirah large steel and S & F new hinges medium weight, cold rolled mild steel of size 75mm complete all as directed.

Removing unserviceable leg, S & F New leg made out out of 1mm thick MS sheet all as directed.

(l) Taking out old unserviceable/damaged door shutter (left/right) from its position of almirah large steel and S & F new door shutter as per existing shape and size made out of 20 G plain black steel sheet (PBI sheet) by providing new hinges and make it smooth functional including painting with one coat of OG synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying complete all as specified and as directed and shown on drg

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) Almirah Large with Shelf (Steel) (FD-1031, FD-1033, FD/E6/MAP/18) (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

ALMIRAH MEDIUM STEEL WITH SHELVE : FD-1032 Taking out old unserviceable/damaged intermediate shelf (Almirah steel medium) from its position and S & F new intermediate shelf as per existing shape and size made out of 20 G Plain black steel sheet (PBI Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying before fixing complete all as specified and as directed.. (Note:- Above drawing pertains to Srl item No 180 to 189 here-in-after.)

Taking out and removing existing unserviceable damaged lock from its position of almirah and S & F new 6 liver steel lock as per existing shape and size as approved with Keys in duplicate complete all as specified and as directed (Make :- HARRISON/LINK/GODREJ/RINA)

Taking out old and removing old unserviceable handle from its position of Almirah steel medium and S & F steel chromium plated handle 125mm long of existing shape and size as approved complete all as specified and as directed.

Removing unserviceable locking assembly with cover, S & F new locking assembly with cover duly painted complete all as directed.

Taking out and removing the old damaged bottom leg (right/left) from its position and S & F new bottom leg made out of 20 gauge plain black steel sheet (PBI Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st quality) over a coat of red oxide primer complete all as specified and as directed.

Taking out loose shelf from its position of Almirah medium steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed

Removing of existing unserviceable hinges from Almirah med steel and S & F new hinges medium weight, cold rolled mild steel of size 75mm complete all as directed.

(l) Taking out old unserviceable/damaged door shutter (left/right) from its position of almirah steel and S & F new door shutter as per existing shape and size made out of 20 G plain black steel sheet (PBI sheet) by providing new hinges and make it smooth functional including painting with one coat of OG synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying complete all as specified and as directed and shown on drg

Removing unserviceable legs, S & F new legs made out of 1mm thick MS sheet made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st quality) over a coat of red oxide primer complete all as specified and as directed and shown on drg

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) Almirah medium with Shelf (Steel) (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

CHAIR SCHOOL WITH HAND BOARD: FD/E6/MAP/05 Removing unserviceable PVC "seat and back", S & F new "seat and back" (Blow Plast or Equivalent) be provided to frame of Chair School with Hand Board rest omplete all as specified and as directed and shown on drg. (Note:- Above drawing pertains to Srl item No 190 to 194 here-in-after.)

Removing of existing unserviceable Hand Board from Chair School WHB and Supply and Fix new doors made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern as approved Top Openable with 6mm Teak wood Beading (Hinged on RHS) Screwed to 25mm Hollow Steel Pipe inserted in 20mm MS Rod welded to Frame, complete all as specified and as directed and shown on drg.

Repairing the broken or damaged wired Frame of 3mm dia wired basket (all as per drg) joined in four corners of the Chair School to be repaired with proper spot welding at 4 points of the legs, all the welding portion shall be proper painted with spray painting of required colour complete all as specified and as directed and shown on drg.

Removing unserviceable shoes, S&F new PVC shoes to legs as per approved specification all as directed.

M & L for spot welding to damaged/broken before painting (as per requirement) the frame of the Chair School with Hand board MAP with and including two coat of synthetic enamel Black of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed.

TEAPOY VARANDAH : FD-35, 255/256 Removing of existing unserviceable leg 'U' type from teapoy verandah and supply and fix new legs made of MS conduit pipe 20mm dia of 1.6mm thick complete all as specified and as directed and shown on drg. (Note : Above drawing pertains to Srl item No 195 to 198 here-in-after)

Removing of existing unserviceable rail from teapoy verandah and supply and fix new rail or flat iron of size ( 25x3) mm with drilling holes for fixing with MS screws including applying two coats of synthetic enamel OG/Grey paint over a coat of red oxide primer all as directed Complete all as specified and as shown on drawing

Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 6mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface polished with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing.

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) teapoy verandah (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

LOCKER BED SIDE STEEL : FD-257,1024 Taking out existing unserviceable hasp and stapple from its position and S & F new hasp and stapple 100mm long mild steel plate type of approved make and design complete all as specified and as directed and (Make :- Mowjee or Equivalent as approved having ISImarked). (Note:- Above drawing pertains to Srl item No 199 to 207 here-in-after.)

Taking out old unserviceable handle from its position of locker bed side steel and S & F new ‘D’ handle of 115mm size mild steel stove enameled black finish as approved complete all as specified and as directed and as shown on drg (Make :- Mowjee or other equivalent as approved make having ISI marked )

Taking out of old unserviceable broken curtain rod from its position and S & F new curtain rod of aluminium 19/20mm dia with steel brackets both sides in the same position by spot welding including painting with one coat of OG synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying over steel brackets after preparation of new steel surfaces complete all as specified and as directed.

Taking out of old unserviceable broken hinges from locker bed side and S & F new hinges medium weight, cold rolled mild steel of size 75mm by spot welding and make it functional by providing pin/greasing etc. complete all as specified and as directed. (Note :- Each spot welding shall not be more than 2.5cm in length and materials to be welded not exceeding 3mm in thickness.)

Removing the old damaged bottom leg (Right/Left) from its position and S & F new bottom leg made out of 20 gauge plain black steel sheet (PBI sheet) fixed in the same position by spot welding including painting with one coat of olive green synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying complete after preparation of new steel surfaces all as specified and as directed.

Taking out old unserviceable/damaged door shutter (Left/Right) from its position and S & F new door shutter as per existing shape and size made out of 20 gauge plain black steel sheet (PBI sheet) by providing new hinges and make it smooth functional including painting with one coat of OG synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying after preparation of new steel surfaces complete all as specified and as directed.

Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 gauge plain black steel sheet (PBI sheet) and fixed in the same position with shelf clips, nuts & bolts etc including painting with one coat of Olive green synthetic enamel (1st quality) paint over a coat of red oxide primer by spraying before fixing after preparation of new steel surfaces complete all as specified and as directed.

Taking out old unserviceable/damaged intermediate shelf from its position and S&F new intermediate shelf as per existing size and shape made out of 20 gauge plain blaic steel sheet ( PBI Sheet) and fixed in the same position with shelf clips, nuts and bolts etc including painting with one coat of olive green synthetic enamel paint (1st quality) over a coat of red oxide primer by spraying before fixing after preparation of new steel surfaces complete all as specified and as directed.

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture (a) LOCKER BED SIDE STEEL (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

CHAIR COMPUTER, CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK), CHAIR REVOLVING WITH ARMS : FD/E6/MAP/01 & TP Removing unserviceable seat, S & F new seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick along with the fabric of approved quality & colour complete all as specified and as directed (Note:- Above drawing pertains to Srl item No 208 to 214 here-in-after.)

All as per serial item No 208.00 here-in-before but for back of chair complete all as specified and as directed.

Removing unserviceable castor wheels, S & F new castor wheels as per the approved complete all as specified and as directed.

Removing unserviceable hand rest, S & F new hand rest matching the previous all in shape,size,material & quality complete all as specified and as directed.

Removing unserviceable pedestal assembly, S & F new pedestal assembly all matching the shape, size & quality of the previous complete all as specified and as directed.

Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism.

M & L servicing the gas lift mechanism & making the seat adjustment functional. All as directed by Engr-in-Charge.

CHAIR VARANDAH : FD-333, 256 and MAP/06 Taking out existing unserviceable cane from Chair verandah steel and weaving the same with plastic cane 4 mm wide half round of approved quality duly applying Two coat of synthetic enamelled white paint of approved quality to the steel surfaces of chair before canning. NOTE :- (i) Canning shall be done in "GODREJ PATTERN" (ii) The cane shall be of "AJAY/MPI/SHAH GARWARE or equivalent" (Note : Above drawing pertains to Srl item No 215 to 218 here-in- after.)

Taking out old unserviceable shoes from its position of Chair Verandah and S & F new hard rubber shoes best quality in the same position complete all as specified.

Removing unserviceable :seat and back " S & F new PVC "seat and back" 4mm thick shall be provided to frame of Chair Verandah all as directed. Note:- Weight of "seat and back" is not less than 1.85 Kgs each.

M & L for painting to steel frame of chair verandah with two coat of white synthetic enamel white paint (1st grade quality) after preparation of old steel surfaces including applying one coat of red oxide primer & two coat of white synthetic enamel paint over newly welded surfaces all complete as specified and as directed.

TABLE COMPUTER : FD/E6/MAP/03 & TP Taking down carefully existing unserviceable top of table and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 6mm thick edging with width equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface polished with and including applying two coat of french polish over and including wood filler and prepration of surfaces Complete and as shown on drawing. (Note:- Above drawing pertains to Srl item No 219 to 223 here-in-after.)

Removing unserviceable key board tray & S & F new key board tray made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) of surface finish colour and pattern(450x480mm) on telescopic channel complete and as shown on drawing.

Removing unserviceable drawer & S & F new drawer made of 18mm made of prelaminated MDF board exterior grade ISI mark (IS:12406-2003) 75mm deep on telescopic channel complete and as shown on drawing.

Removing unserviceable shoes, S & F new hard rubber shoes(nylon buffers) to legs best quality in the same position complete all as specified.

M & L for painting to steel frame with two coat of white synthetic enamel white paint (1st grade quality) or approved shade after preparation of old steel surfaces including applying one coat of red oxide primer & two coat of white synthetic enamel paint over newly welded surfaces all complete as specified and as directed.

RACK SHOE STEEL : FD/E6/MAP/02(R) M & L welding before painting (as per requirement) the shoe rack steel by two coat of synthetic enamel black colour of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed. (Note : Above drawing pertain to Srl item No 224 to 226 here-in-after).

Taking out existing unserviceable Shelves from shoe rack and supply and fixing for new shelve fixing the same in position, complete all as specified and directed

Removing unserviceable shoes, S & F new PVC shoes to legs all as directed.

CHARPOY ALL TYPE CHARPOY SQUARE TUBULAR/BED HARD MAP : FD-220(R) /FD/MAP-II/01 & FD/E6/MAP/08(R) Taking out unserviceable plywood top from Charpoy square tubular/Bed Hard Map and supply and fix with new plywood 12mm thick plywood BWR grade, 7 ply ISI marked of reqd size as per shown on drawing in charpoy MS rectangular pipe/Bed Hard and all as specified and as shown on drg. (Note:- Above drawing pertains to Srl item No 227 to 231 here-in-after).

Taking out unserviceable head board/foot board from Bed Hard Map and supply and fix for new head board/foot board made out of MDF board exterior grade ISI mark (IS:12406-2003) complete all as per drg and as directed.

Taking out unserviceable stiffener from Bed Hard Map & Charpoy Square Tublar and supply and fix for new stiffener of required size as per shown on drawing in charpoy MS rectangular pipe and all as specified and as shown on drg.

Material and labour for preparation of old painted steel surfaces Charpoy square tubular/Bed Hard Map and applying two coat of synthetic enamel paint complete all as specified and as directed.

Removing unserviceable shoes, S & F new hard rubber shoes(nylon buffers) to legs best quality in the same position complete all as specified.

Charpoy GI with Ply Top : FD-220 Charpoy GI with Ply Top Taking out existing unserviceable 3 way elbow from Charpoy GI ply top and supply and fix new 32mm bore galvanized mild steel tubular and other wrought steel elbow side outlet equal (3 way elbow),ISI Marked (IS 1239 Part 2) suitable for fixing to GI short rail,long rail and legs of GI charpoy, complete all as specified and directed. (Note:- Above drawing pertains to Srl item No 232 to 238 here-in-after).

Taking out unserviceable FI stiffner from Charpoy GI ply top and supply and fix new stiffener made out of flat iron 25 x 5 mm thick (approx 1 metre long) and fixed to long rail with mild steel chromium plated nut & bolt not less than 8mm dia. including drilling holes in stiffener and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer after preparation of surface,complete all as specified and as directed.

Taking out existing unserviceable check nut and supply and fixing new 6mm thick GI check nut,32mm size and fixing the same in position, complete all as specified and directed

Taking out and removing old unserviceable long rail from its position and including separating serviceable portion of the same for making short rail/legs and supply and fixing new long rail as per existing sizes made out of 32mm bore GI Pipe Medium grade (ISI Marked) and fixed the same in the existing position with making thread at both ends complete all as specified and as shown on drawing

Taking out and removing old unserviceable short rail from its position including separating serviceable portion of the same for making legs and S&F new short rail and per existing size made out 32 mm bore GI Pipe medium grade ISI marked and fixed in the same position complete all as shown on drg. Note :- Old long rail retrieved from Serial Item No 235 Here in Before shall be used for converting into short rail.

Taking out and removing old unserviceable legs from its position and S&F new legs from its position and as per existing size made out of 32mm bore, GI pipe medium grade and fixed the same in the existing position with making thread at one end complete as specified and as shown on drg. Note :- Old short rail retrieved from Serial Item No. 236 Here in Before shall be used for converting into legs.

Material and Labour for taking out the old unserviceable plywood from charpoy GI pipe/Charpoy with hard top and S & F new ply wood 12mm thick with 7 Nos of ply wood commercial grade BWR type of required shape and size fixed with new screw to wooden rail complete all as specified and as directed and as shown on drg.

Charpoy Folding IP with Hard Top : FD-388(R) :- Taking out existing unserviceable plywood top from Charpoy Folding IP with Hard Top and supply and fix new 12 mm thick ,7 No of ply, plywood, grade BWR,Type BB, ISI Marked (IS: 303), complete all as specified and as directed and as shown on drg. (Note:- Above drawing pertains to Srl item No 239 to 242 here-in-after).

Supply and Fix in repair, hard rubber shoes suitable for legs of Charpoy Folding IP with Hard Top, complete all as specified and shown on drawing(s).

Materials and Labour for,preparation of old painted steel and iron surface in Charpoy Folding IP with Hard Top and applying two coat of synthetic enamel paint ,complete all as specified and directed.

Materials and Labour by spot welding in repairs, exc 2.5 cm and not exc 5 cm in length and thickness of metal to be welded not exceeding 6mm thick,complete all as specified and directed.

LUIT CONSTRUCTION (BID ID -3284655)

SHRI D. C. BISWAS (BID ID -3284596)