Development of centralized scrap yard inside prohibited area

Amount

Filling in foundation and plinth with filling sand /dredged spoil including watering and ramming but excluding cost of GST as directed by the Engineer-in-charge. 10% of voids will be deducted from measured quantity for payment.

Providing, laying, spreading and compacting stone aggregates of IRC Gr-II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Providing & laying quarry dust of approved as sub-base in layers of required thickness each watering and compacting to the required density with Vibratory Roller with suply of all material, labour, trasnportation, hire & running charges of equipments, taxes, tollage, royalties etc. all complete but excluding GST as directed by Engneer-in-charge.

Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge (Excluding GST).

Providing single under reamed bored compaction pile foundation of 6.00 mtr long and 300 mm dia reinforced cment concrete of M-20 grade using 12mm size black hard granite (CB) stone chips, boring from existing ground level with removal of obstruction, if any, using bentonite, providing required reinforcement as per drawing making the end of the case to Conical shape, weided property, providing 750mm dia under ream at appropriate level and disposal the boring earth from work site with supply of all labour, T&P, taxes, Port entry fees, hire & running charges of all machineries required for the work etc. all complete excluding GST and as per direction of Engineer-in-charge (Excluding cost of reinforcement, steel and binding wire).

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge

Cement Concrete (1:1.5:3) using 12mm to 20mm size C.B.G chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Drilling 16mm dia holes on concrete surface (vertical/horizontal), upto 200mm depth , cleaning the holes with air blower, filling the hole with thick cement slurry and putting 12mm dia rods of required length with supply of all materials,labour,T&P, Gate Pass expenses all machineries,operator expenses,POL and inclusive of all taxes etc. all complete as per direction of Engineer-in-Charge.(Excluding cost of GST). * The payment for 12mm dia rod is not included in the price.

Supply Tor/TMT steel manufactured by original Steel manufacturer, not from rooling mills, minimum of Fe 500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour,materials, transportation charges, T&P, taxes, etc. all completebut excluding GST as per the direction of Engineer-in-charge. NB: No payment shall be made for extra weight than theoretical co-efficient.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in -charge.

Beam/Column

Roof Slab

Brick work in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in-charge.

16 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge

Supplying, fitting and fixing of MS Angle, channel, plate, etc. with cost of fabrication, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as per direction of Engineer-in-charge (Excluding GST).

Removal of debrises, damaged conc pieces, slip earth, malba from site and disposting it off within a lead of 5.00 km including loading and unloading, hire charges of vehicles, labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge but excluding GST.

Providing and laying factory made chamfered edged cement concrete paver blocks of following strength and thickness made by table vibratory method using PU mould , laid in required colour & parten over 50 mm thick (avg.) compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour , t&P taxes tollage etc all complete but excluding GST as directed by EIC.

100mm thick M-50 Grade

80mm thick M-30 Grade

One coat Priming with water bound cement primer to the newly plaster surface of the exterior wall or over the exisitng surface of the exterior/interior wall of approved make & shade to make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, transportation charges etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge.

Engagement of machineries for shifting of conc block and placing of old sleeper with supply of all macinaries, T&P, taxes etc. all complete as per direction of Engineer-in-charge but excluding GST.

Hydra for placing of sleeper

JCB for shifting of conc. Block

Tractor for shifting of conc. Block

Unskilled labour for placing of old sleeper etc. (Including Gate Passes).

Skilled labour for placing of old sleeper etc. (Including Gate Passes).

Engagement of 5HP Diesel Pump sets and placing those pumps at required locations inside prohibited area for dewatering of stagnated water by pumping including fuel and consumable, providing required length of suction and delivery pipes with supply of all labour, T&P, engagment, hire & running charges of Pump, transportation charges, tollage, Operator cost, Port entry fee with barricading the same area if required etc. including all taxes excluding G.S.T all complete as directed by Engineer-in-charge. (No idle charges will be paid. Pumps will be engaged as and when required).

Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc. complete including cost of all materials,labour, T&P, tollage, taxes excluding GST etc. all complete as directed by the Engineer-incharge. (NB: No payment will be made for overlapping).

Supplying, fitting, fixing of punched type concertine coil of diameter 610 mm having 51 turns in one coil and 6.00 mtr length tobe stretched manufactered out of 19 mm x 0.5 mm thick steel strips and 9 nos horizontal razor barbed Tape (RBT) made of 2.5 mm thick spring steel core wiere and weight 80 gms/RMT with 18 to 25 micron zinc coating over the coil & RBT both materials having tensile strength of 1620 N/mm2, both are dipped in corrosion preventive fluid, fixing with angle posts section wtih GI stapples or GI clips/wires to retain horizontal with supply of all material, labour,T&P, taxes, stagging etc. all complete but excluding GT as directed by EIC.

Transpotation of old sleeper from stacks to the work site (within 10 Km) with supply of all labour, T&P, machinaries, etc. all complete as directed by Engineer-in-charge, but excluding GST.

Painting two coats with approved quality & shade enamel paint on new / old work over one coat of primer including scrapping, cleaning the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge.

Supplying, fabricating, fitting and fixing of stainless steel (Gr-304) gates with using approved size and Grade of square tubes including supplying, fabricating, fitting, fixing at required position, line & level with Aldrop, Tower bolt, hold fast etc. including cost of transportation etc. all complte as directed b Engineer-in-charge including all taxes but excluding GST.

Providing fitting, fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and size of the aluminium section is 125 mm x 37 mm x 150 mm and 12mm thick prelaminated board on bottom and 6mm plain glass on top fixed door frame by means of tapared clip No.4660 and the frame to be completed by means of jointing angleNo.1855 including providing rubber beading, aluminum U channels, angle, clis, required nos. of handles, tower bolts,hooks, mortise lock and hydraulic, door stopper as per relevant IS specification, etc. all finished including cost and supply of all materials, labour, T&P, taxes, transportation charges staging, scaffolding, etc. complete and as per direction of Engineer-in-charge (Excluding GST).

PART-B (ELECTRICAL WORK)

Supply, Installation, Testing & Commissioning of 20 Mtr. Height High Mast Lighting Tower with timer control panel with all accessories.

Supply of 20 Mtr. Height High Mast Lighting Tower with timer control panel as per scope of work.(Excluding GST).

Supply of 400 watt LED WW asymmetrical flood light luminaries with all accesories as per scope of Work. (Excluding GST).

Supply of Power tool and Hand driven tool for raising and lowering operation as per scope of work. (Excluding GST).

Supply of 3.5 C X 50sqmm ,1.1 KV grade G.I armoured XLPE insulated stranded aluminium conductor cable. (Excluding GST).

Design & erection of foundation for the High mast Lighting Tower. (Excluding GST).

Instllation ,Testing and Commissioning of 20 mtr High mast Tower. (Excluding GST).

Execution of Special Earthing by using 50 mm dia 20 ft long heavy gause G.I pipe & other related earthing materials as per latest IE rule. (Excluding GST).

Laying of 3.5 C X 50sqmm ,1.1 KV grade G.I armoured XLPE insulated stranded aluminium conductor cable. (Excluding GST).

Supply,Installation,Testing & Commissioning of 20 Mtr. Height CCTV tower with 02 nos IP camera & 01 no PTZ camera with all accessories

Supply and Installation of 20 mtr Tower (1) (i) 4.8mm thick. 4'' pipe (3 Mtr x 9 pcs),4.5mm thick 2.5'' pipe ( 3 mtr x 3 pcs)(iii) 3.6mm thick. 2'' pipe ( 3 mtr x 9 nos), Total Pipe weight = 540 Kg. (2) (i) ISA 60mm X60mm X 6mm Angle ( 1250 mm x 36 nos) (ii) ISA 60mmX60mmX6mm Angle (900 mm x 36 nos),(iii) ISA 40mmX40mmX3mm (1250 MM X 27 nos) (iv) ISA 40mmX40mmX3mm (900 mmx 27 nos)(V) ISA 40mmX40mmX3mm (600 X 12 Nos), Total Angle weight= 631 KG (3) Plate (100mm x 6 mm x 63 no) Total weight =15 KG. (4) Base plate (300mm x300mm x 3mm nos)= Total plate Weight=35 Kg.(5) flanch Plate (8mm x 150mm x 150mm= 42 nos.)=Total weight =60 Kg.( 6 ) Nut and Bolt= 50 Kg, with Hot dip galvanizing, foundation with supply and installation of foundation bolt as per your specification and conreat foundaton erection of Tower, installation of lighting arrester. (Excluding GST).

Supply of 4 MP Varifocal IP Camera Max. Resolution (2560 × 1440), High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-Dark Fighter technology, 120 dB true WDR technology,3D DNR technology Motorized varifocal Water and dust resistant (IP67) and vandal-resistant (IK10,Image Sensor 1/2.4" Progressive Scan CMOS,Min. Illumination Color: 0.003 Lux @ (F1.6, AGC ON),Lens Type Varifocal lens, motorized lens, 2.7 to 13.5 mm and 7 to 35 mm optional, up to 60 mtr IR distance. (Excluding GST).

Supply of 2 MP PTZ Camera 32X optical Zoom 16x Digital zoom, 200 Mtr IR Distance t (IP67) and vandal-resistant (IK10,Image Sensor 1/2.4" Progressive Scan CMOS,Min. Illumination Color: 0.003 Lux @ (F1.6, AGC ON). (Excluding GST).

Supply of Cat-6 Cable (Excluding GST).

Supply of 4 Core 2.5 sqr mm copper flexible cable (Excluding GST).

Supply of 2 U outdoor Rack (Excluding GST).

Supply of 4 Port Giga PoE switch (Excluding GST).

Supply of Junction Box with 32 Amp MCB.(Excluding GST).

Installation & testing with commissioning charges (Excluding GST).

Execution of Special Earthing by using 50 mm dia 20 ft long heavy gause G.I pipe & other related earthing materials as per latest IE rule (Excluding GST).

Wiring to Security Room with supply of all accesories as per BoQ.

Supply of 9 watt LED batten light with inbuilt LED lamp.

Supply of 1400 mm sweep ceiling fan.

Wiring to light points with 6 / 10 Amp. Modular Switch and copper wire alongwith modular board & plate.

Wiring to 6/10 Amp. modular type plug point with provision of switch & socket alongwith modular board & plate.

Wiring to ceiling fan point with 6 / 10 Amp. Modular Switch alongwith modular board & plate.

Wiring to 16/20 Amp. modular type plug point with provision of switch & socket alongwith modular board & plate.

Fixing of light fittings.

Fixing of ceiling fan.

Execution of Special Earthing by using 50 mm dia 20 ft long heavy gause G.I pipe & other related earthing materials as per latest IE rule.

M/s.SAI SHREYASI CONSTRUCTION (BID ID -3283685)

NNS CONSTRUCTIONS AND ENGINEERING PRIVATE LIMITED (BID ID -3283644)

SUBRAT KUMAR BEHURA (BID ID -3283255)