COMPREHENSIVE MAINT AT MIL STATION JALIPA UNDER GE ARMY BARMER

Amount

M&L for taking down cement or cement lime plaster, any description on brick or stone/block walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear for plastering complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete, stone masonry surfaces with using WPC, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separatley.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, stone masonry surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed. (Note : All plastering work will be done in patches of any qty and any size all as specified by Engr-in-charge)

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of interior wall primer over 1.0mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted cement, plaster surfaces of any description over 10cm in girth or width and painting with two coats of plastic emulsion complete all as specified and directed.

M&L for demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Glazed ceramic tiles of size 300mm x 200mm x 7mm/ 450mm x 300mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

All as per Sl item No. 13 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick (in single piece as vertical support and horizointal base for granite top) in cooking platform, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20mm thick Granite (of any type in single piece) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 300mmx300mmx10mm thick non skid polka dots endura parking floor paver tiles with grey cement and pigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M&L for demolition of concrete in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Roof covering laid in slope, Holdfast,including necessary Formwork and weathering, slightly rounded or chamfered angles and throating,finished even and smooth without using extra cement, complete all as specified and directed and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 80 mm thickness machine pressed precast interlocking paver block any shape and size conforming to IS - 15658-2006 of M-40 grade with grey cement and no pigment complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.

M&L for cement concrete (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed .

M&L for taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

M&L for taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

M&L for taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and directed.

S&F 25mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms. / 25mm-455gms/ 40mm - 690 gms).

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms. / 25mm-455gms/ 40mm - 690 gms)

S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore two way Bib taps (for health faucet/jet spray) fancy type, chromium plated, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and directed.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs 15mm bore stop valves, angle cock, cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair 15mm bore dia pipe CP wall mixer for mixing (HOT/COLD) water, with wall cap/band of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.

S&F in repair 15mm bore centre hole basin mixer fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' and `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 32 to 40mm dia PVC waste pipe for WHB/sink/Urinal complete all as specified and directed.

S&F in repair Jet Spray (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.00 metre long flexible tube including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm provided with access door complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm provided with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed.

S&F in repairs 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed.

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed.

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F for 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

S&F for 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

S&F in repairs 100mm bore cast iron branch pieces, single or double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed.

S&F in repairs 75mm bore cast iron branch pieces, single or double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed.

S&F in repair 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

S&F in repair 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Fixing only in repair 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Fixing only in repair 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including waste pipe complete all as specified and directed.

M&L for taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after repairing complete all as specified and directed.

M&L for taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .

M&L for taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed .

M&L for taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F for pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc. complete all as specified and directed.

S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc complete all as specified and directed.

S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and directed.

S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed .

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for facking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and directed.

S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm in girth or width and painting with one coat of synthetic enamel paint complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors, complete all as specified and directed.

S&F in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.

S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.

S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F for 150mm size aluminium anodized handle complete all as specified and directed.

S&F in repair 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150mm size aluminium anodized handle complete all as specified and directed.

S&F for 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for running welding in repairs for metal thick not exc. 6mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding & bevelling of edges as required, complete all as specified and directed.

M&L for welding in repairs n. exc 2.5cm in length thickness of metal to be welded n exc 6mm complete all as specified and directed.

M&L for prelaminated particle board of 18/19mm thick, MDF block boards, interior grade, with decorative face veneers on both faces commercial type, fixed with screws to timber frame-work, fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves including including all designer SS fittings like hinges, handle, magnet etc dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

S&F for 30mm width of flaps (When open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F for 100mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100 mm size aluminium anodized handle complete all as specified and directed.

M&L for demolition of wall and ceiling and paneling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for 18mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, wood leaping on exterior face, as in wall peneling complete all as specified and directed.

S&F for 2nd class hard wood plain fillets, square, rectangular or triangular in sectional area Exc 6 & n exc 13 sq. cm, clean sawn, secured with mills or brads complete all as specified and directed.

S&F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

M&L for dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F for Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

All as per srl item No 114 above but except steel sheet. (Note: Serviceable sheets obtained from item No. 116 shall be reused.)

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F in repairs for galvanised , corrugated mild steel sheeting 0.63mm thk with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for steel work (tubular/hollow) in trusses, post, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and directed.

M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and directed.

S&F in repairs sheet glass shelf aasembly consisting of 5.50 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and directed.

S&F in repair 100mm size mortise lock, Aluminium, vertical type, four leavers, complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair vertical blinds slat mounted on head/top rail with moving bracket assembly and cord drive runner fixed with SS wall bracket assembly and screws operated with metal chain, nylon cord and cord weight including all required accessories etc complete all as specifed and directed. (Make : High Tech or techno commercially equivalent)

S&F in repair roman blinds folds on itself mounted on head/top rail with bracket assembly and cord drive runner fixed with SS wall bracket assembly and screws operated with metal chain, nylon cord and cord weight including all required accessories etc complete all as specified and directed. (Make : High Tech or techno commercially equivalent)

S&F of designer paper of approved colour of any description and thickness fixed with necessary adhesive on wall, ceiling, wood work etc complete all as per manufacturer instructions including complete removal of old existing treatment and making good with wall care putty and rubbing with sand paper to obtain smooth surface complete all as required and directed.

S&F for 4mm thick acoustic/ sound proof fabric jute backing type of approved colour of any description fixed with necessary adhesive on wall, ceiling etc complete all as per manufacturer instructions including complete removal of old existing fabric and making good old surface and rubbing with sand paper to obtain smooth surface complete all as specified and directed.

S&F for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F for 1.5mm thick fibre glass reinforced translucent plain sheet fixed with coach screw and washer in roof, wall, steel frame etc of any description complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for walling of random rubble uncoursed ,well bonded ,bedded and solidly hearted built in CM (1:4) and brought up to course complete all as specified and directed.

M&L for keyed pointing in CM (1:4) to random rubble masonry, uncoursed complete all as specified and directed .

S&F for anodised aluminium partition (partly glazed and partly panneled) comprising of aluminium section 101.04 x 44.45 x 1.5mm thick, aluminium top rail 86.17 x 44.45 x 2.3mm, bottom and lock rail 150 X 44.45 X 2.3mm and style 53.7 X 44.45 X 2.3mm and including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, and aluminium hardware fitting fixed with steel chromium plated screws, including taking down old aluminium partition, complete as per site requirement complete all as specified and directed. Note : Glass and PVC panel will be measured and paid seperately.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with beads fixed with metal panel pins exc 0.5 sqm. in each pane complete all as specified and directed.

S&F 40 mm thick solid PVC sandwich panel with 1mm printed PVC sheet on both sides suitably fixed in frame work as per specification & drawing complete all as specified and directed.

S&F in repairs steel rolling shutters, thickness of laths 1mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat coat of primer ; erected in position as indicated, push pull or manual type complete all as specified and directed.

S&F in repairs ball bearing for rolling shutters complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies type C0, 1:3:6(12.5mm graded aggregate) set in cement mortar 1:6, 25mm thick (measured solid), including all mouldings complete all as specified and directed.

M&L for taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) etc complete and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including surface/cocealed type as required in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switches complete all as specified and directed.

All as per srl item No. 146 above but One light point controlled by 2- way switches, with cables 1.5 sqmm size complete all as specified and directed.

All as per srl item No. 146 above but one 5 Amps 3/5 pin socket outlet on the same board with other switches.

All as per srl item No. 146 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per srl item No. 146 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

All as per srl item No. 146 above but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed .

All as per srl item No. 153 above but one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per srl item No. 153 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per srl item No. 155 above but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

S&F switch piano, flush button, 5/6 Amps single pole, one way, 230 Volts including taking down complete all as specified and directed.

S&F Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts including taking down complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5 Amps, flush type including taking down complete all as specified and directed.

S&F switch socket combination, 3/5 pin, 5 Amps, flush type including taking down complete all as specified and directed.

S&F Switch socket combination multi-purpose 3pin, 15 Amp and 3 pin, 5 Amps including taking down complete all as specified and directed.

S&F Ceiling rose surface bakelite 65x50 mm, two to three terminals.including taking down complete all as specified and directed.

S&F Bell push,flush type,5 Amp. including taking down old complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 220 Volt on the existing phenolic laminated sheet etc all as specified and directed.

S&F electronic dimmers, 450 W, 250 V flush type on the existing phenolic laminated sheet etc all as specified and directed.

S&F Buzzer,Ding Dong AC,230 volts,single pole. including taking down complete all as specified and directed.

M&L in repair for LED light fitting,1x10 watt bulk head luminaries, including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED light fitting 1X 20 W, 4' length, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair Lamp holder insulated body with back plate suitable for batten fitting complete all as specified and directed.

S&F in repair PVC rectangular block of size 10cm x 10cm x 5 cm depth for mounting switches sockets, fan regulators etc with 3 mm thick laminated sheet cover including taking down complete all as specified and directed.

S&F in repair PVC board of size 17.5cm x 10cm x 5 cm depth for mounting switches sockets, fan regulators etc with 3 mm thick laminated sheet cover including taking down complete all as specified and directed.

S&F in repair PVC board of size 20cm x 15cm x 5 cm depth for mounting switches sockets, fan regulators etc with 3 mm thick laminated sheet cover including taking down complete all as specified and directed.

S&F in repair PVC board of size 25cm x 20cm x 5 cm depth for mounting switches sockets, fan regulators etc with 3 mm thick laminated sheet cover including taking down complete all as specified and directed.

S&F in repair PVC board of size 35 cm x 30 cm x 5cm depth for mounting switches sockets, fan regulators etc with 3 mm thick laminated sheet cover including taking down complete all as specified and directed.

M&L for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing and capping with all necessary accessories complete all as specified and directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC casing and capping with all necessary accessories will be measured as one length).

M&L for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC casing and capping with all necessary accessories complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for sub main wiring surface type/conealed type as required at site with four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC casing and capping with all necessary accessories complete all as specified and directed. (Note :- Four runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for sub main wiring surface type/ concealed type as required at site with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for sub main wiring surface type/conealed type as required at site with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for sub main wiring surface type/conealed type as required at site with four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Four runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S&F in repair factory made board distribution in sheet steel enclosure without bus bar SPN, 2 way, 240 Volts suitable for fixing MCBs complete all as specified and directed.

S&F in repair Factory made board distribution in sheet steel enclosure with 200 Amps rated bus bar SPN, 4 way double door 240 Volts suitable for fixing MCBs complete all as specified and directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

S&F in repair MCB, SP, 240 Volts, 5 to 32 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete all as specified and directed

S&F in repair MCB, SPN, 240 Volts, 5 to 40 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and directed

S&F in repair MCB, TPN, 415 Volts, 40 to 100 Amps., 10 KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral in the MCB DB complete all as specified and directed

S&F in repair MCB, SPN, 240 Volts, 40 to 63 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and directed

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 20 A ,240 V complete all as specified and directed.

M&L for taking down ceiling fan/exhaust fan and dismantling blades and removing fan and blades to store complete all directed

Supply and fix ceiling fans, complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting with 3 core flexible copper conductor complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete including connecting with 3 core flexible copper conductor complete all as specified and directed.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Devi Engineeing (BID ID -3086905)

RAMDEV ENTERPRISES (BID ID -3094850)

M/s Malinath Electricals (BID ID -3095006)

M/S Tanisha Traders (BID ID -3078205)