Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
10 Sept 2026, 4:00 pm
E E RWS ZP CHANDRAPUR
E E RWS ZP CHANDRAPUR
purchase of handpumps set, spare parts tools for repair And maintenance of hand pumps Year 2026-27
2026_CHAND_1332387_1
RWS_ZP_CHANDRAPUR 21/2026-27
Open Tender
Civil Works - Water Works
Item Wise
365 days
CHANDRAPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹20,000
₹2.2 L
27 Aug 2026
27 Aug 2026
15 Sept 2026
27 Aug 2026
10 Sept 2026
27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | Description of Items | - | - | - | - |
| 1 | 32mm Nominal bore hot dipped galvanised screwed and seiected pipe in 3.00 mt length with tolerance of + 0 to (-) 25mm. Confirming to IS 1239 (Part I) 1990 Meddium Class The socket shall be manufactured from seamless pipe or machined from solid bar Confirming to grade Fe 410 - S of IS 226/1975 with a dimensions (length & Diameter) specified in IS 1239 (partll) 1982 and shall be hot dipped galvanised. One end of the riser pipe shall be fitted with hot dipped galvanised coupler and the other with thread protector. pipe supplied shoud have IS 1239 mark embossed on it. tolerance on thickness and mass galvanising, leak lightness test, bend test on tubes, chemical composition, dimensions, bend test, sampling criteria for conformity marking, protecting and packing and all other details should be followed as per IS:1239 (Note : 3 mt length of pipe willl be measured without socket) Wt per pipe should not be less than 8.5 kg per piece. | - | Nos | - | - |
| 2 | Upper valve for deep well IM II hand pump as per IS 15500(Part II) /2004. | - | Nos | - | - |
| 3 | Check valve for deep well IM II hand pump as per IS 15500(Part II) /2004 | - | mm | - | - |
| 4 | Water tank for deep well IM II hand pump as per IS 15500(Part II) /2004 | - | km | - | - |
| 5 | Telescopic Stand for deep well IM II hand pump as per IS 15500(Part II) /2004 | - | KK | - | - |
| 6 | Sealing ring for deep well IM II hand pump as per 15500(Part II) /2004 | - | Nos | - | - |
| 7 | cylinder assembly (complete unit inclusive of stainless steel plunger rod 12 mm dia with NITRILE rubber pump bucket) with upper valve assembly, lower valve assembly suitable for IM II hand pump as per IS 15500 (part II) /2004 | - | Nos | - | - |
| 8 | upper valve assembly with (2nos nitrile rubber) pump bucket ,& comprising of plunger yoke body, upper valve, rubber seating, spacer & follower suitable for IM II hand pump as per IS 15500 (part II) 2004 | - | Nos | - | - |
| 9 | Lower valve assembly with rubber seat retainer, rubber seating, check valve & check valve seat for deep well hand pump IM II as per IS 15500 (part II) 2004 | - | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_2280214.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].