REPAIR TO FOOTPATH DRAIN CULVERT AND MISC WORKS AT VARIOUS LOCATIONS UNDER AGE B R I OF GE AF ADM AREA AGRA

Amount

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in drain covers, set in CM (1:4) complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15 mm cement plaster 1 : 1/2 : 2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Making grooves of uniform size 15 mm x 15 mm shall be included in quoted rates.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, in full brick thick walls, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 7.00 of BOQ here-in-before but except bricks. Note : Bricks obtained from item No 6.00 of BOQ here-in-before will be reused.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 100 mm thick PCC, 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in hardstanding, paving etc, laid in panels alternative, finished the surface even and fair complete all as specifie and directed.

M&L for 12 mm wide expansion joints in 100 mm thick cement concrete including filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors over and including screed bed in cement mortar 1:6, 15 mm thick including taking down of old tiles and removal of screed bedding complete all as specified and directed.

M&L for 60 mm thick machine pressed rubber moulded precast concrete M-30 interlocking coloured paver block of any shape and size conforming to IS-15658-2006 laid over and including 25 mm thick sand cushion and providing concrete filleting with PCC type B-1 at the end of paver block or as required at site including dismantling of old tiles complete all as specified and directed.

Dismantling of structural steel work including door, gates, grill, truss or any description complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters, purlins or similar works posts where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe 410-W Gde E-250) quality A complete all as specified and directed.

Dismantling of plain, corrugated aluminium/ steel sheeting, any guage or thickness, any type or any position from RCC, steel structure complete all as specified and directed.

S&F pre-painted galvalume of aluminium and zinc alloy coating with steel based corrugated sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume of aluminium and zinc alloy coating with steel based plain sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in floor, laid in panels, finished the surface even and smooth with using extra cement including providing 3 mm thick, 38 mm wide glass strip complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection/ paving etc, finished the surface even and fair complete all as specified and directed.

M&L for complete removal of existing treatment from external surfaces of walls by wire brushing and washing rubbing down and stopping of surfaces and leveling/ edging the disturbed place/ edge and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment from external surfaces of walls by wire brushing and washing rubbing down and stopping of surfaces and leveling/ edging the disturbed place/ edge and applying two coats of exterior emulsion paint complete all as specified and directed.

M&L for prepration of old painted surfaces of walls by wire brushing and washing rubbing down and stopping of surfaces and leveling/ edging the disturbed place/ edge and applying one coat of cement base paint complete all as specified and directed.

M&L for prepration of old painted surfaces of walls by wire brushing and washing rubbing down and stopping of surfaces and leveling/ edging the disturbed place/ edge and applying one coat of exterior emulsion paint complete all as specified and directed.

Cleaning and removal of sludge/ loose earth/ leafs/ braches from open drain having n. exc 0.35 m width of any height complete all as specified and directed.

Cleaning and removal of earth/ sludge filled in PVC pipe n. exc 150 mm bore of any lengh complete all as specified and directed.

M&L for complete removal of existing treatment from old painted plastered or concrete surfaces and applying two coats of synthetic enamel paint on kerb stone in alternative colour complete all as specified and directed.

M&L for 25 to 30 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30 mm x 2 mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over and including 15 mm thick screed bed in CM 1:4 and taking down of old tiles complete all as specified and directed.

M&L for 25 mm thick rough dressed sand stone slab as in vertical surfaces, set, jointed and pointed in cement mortar 1:3 over & including 10 mm thick rendering in CM (1:3) including taking down of old stone slabs complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

S&F salt glazed stone ware drain pipes, grade 'A' , 200 mm bore laid in trenches and jointed with cement including taking down old pipes complete all as specified and as directed.

S&F salt glazed stone ware drain pipes, grade 'A' , 300 mm bore laid in trenches and jointed with cement including taking down old pipes complete all as specified and as directed.

M&L for concrete bed to drain pipes including packing under and hanching against the sides of pipe after laid and tested in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) for 200 mm bore pipe complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and hanching against the sides of pipe after laid and tested in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) for 300 mm bore pipe complete all as specified and directed.

Demolition of precast cement concrete articles such as RCC jalli etc set in cement mortar or cement lime mortar complete all as specified and directed.

S&F precast RCC louvers, jallies 40 mm thick type B-0, 1:2:4 (using 12.5 mm graded stone aggregate), set in CM (1:4) including all mouldings and frame work all as specified and directed.

S&F in repair concertina coil of 600 mm dia (in stretched position), not dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG), fixed to the MS angle iron/precast RCC fencing post to be fixed with barbed wire at points where coil touched the bottom with the help of lug rings (24 SWG) complete all as specified and directed.

S&F in repair road convex mirror of size 1000 mm dia and mounted on MS pipe 50 mm bore duly powder coated overall length 1400 mm fitted with anti rust theft steel net including necessary earthwork and embedded in PCC 1:2:4 type B1 block of size 35 cm x 35 cm x 40 cm complete all as specified and directed.

S&F in repairs colour cat eyes/ road studs size 100 mm x 110 mm x 20 mm having tough poly carbonite micro reflected corned cube reflector tenses with a protective abrasion resistant ceramor coating having body of weather proof and impact resistant thermoplastic fixed on road for roadways sign complete all as specified as per manufacturers instructions and directed. MAKE- Dark Eye model No DA-52 with double shank or equivalent in 3M as approved by GE.

M&L for applying 2 mm thick thermo plastic road marking compound of white/ yellow (approved colours) colour & shade for road marking with machine on bituminous/ concrete road surface width or paint line as per direction of Engr-in-Charge at site & managing the traffic control with proper arrangement etc complete all as specified and directed. Make : ASIAN MOST CMS APCO-BS or approved by GE

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

SAROJ CONSTRUCTIONS

M/s Pooran Singh and Company

deva engineers

Mohd Gulab Hussain

M/s M S Sharma and Co.

Asha Construction

jmd engineers

Rakesh kumar

M/s Singh Electric Co